antenna Product List and Ranking from 93 Manufacturers, Suppliers and Companies

Loop antenna 9kHz–30MHz TBLLA-2M

The TBLLA-2M is a large loop antenna (LLA) equipped with three orthogonal loops that meets the requirements of CISPR 16-1-4 and CISPR 15/EN 55015. The LLA is used to measure the current induced by the magnetic field radiated from lighting fixtures. Section 4.4 of EN 55015 specifies the test setup and measurement procedures. The TBLLA-2M has three loop antennas with a diameter of 2 meters arranged vertically on three orthogonal planes (X/Y/Z). These antennas are mounted on a lightweight hollow WPC frame with a total height of 2.5 meters. The lowest point of the loops is 0.5 meters above the ground. Each loop element receives a magnetic field radiation that is perpendicular to the installation surface, generating a voltage signal at the output port of the RF transducer connected to the loop, which is proportional to the strength of the H magnetic field radiation. The TBLLA-2M is equipped with three TekBox TBCCP1-2K70 coaxial RF current monitoring probes (transducers). These probes have a flat transfer impedance characteristic of 0dBΩ (1V/A) over a frequency range of 9kHz to 30MHz at a 50Ω load.

Company：ウェーブクレスト
Price：Other

EMC Testing
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Biconical antenna

Biconical Antenna TBMA2

The TBMA2 is a biconical measurement antenna for EMC radiated emission testing and generating specified electric field strength. It is an ideal choice for any lab conducting in-house pre-compliance testing at an affordable price. It has characteristics in the frequency range of 30MHz to 300MHz and features a directional pattern similar to that of a dipole antenna. The TBMA2 comes with a POM bracket that has a 1/4 inch screw hole for mounting on a standard tripod. To avoid the disadvantages of contact deterioration due to aging from a non-welded structure made of aluminum, the radiating element uses stainless steel components. The radiating element is secured with screws instead of welding, making assembly and disassembly easy, as well as simplifying storage and transport. The antenna element is fed through a 1:4 balun with a power handling capability of 100W.

Company：ウェーブクレスト
Price：Other

Other measurement, recording and measuring instruments
EMC Testing
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Log-periodic antenna logarithmic periodic measurement antenna

Log-periodic antenna logarithmic periodic measurement antenna TBMA3

The TBMA3 is an affordable logarithmic periodic measuring antenna designed for radiated noise EMC pre-compliance testing. The TBMA3 is characterized in the frequency range of 250 MHz to 1.3 GHz, showing typical values for VSWR and antenna factor for logarithmic periodic measuring antennas. CISPR 16 divides the frequency range into multiple bands and specifies a particular antenna for each band. For the frequency range above 300 MHz and below 1 GHz, the use of a logarithmic periodic antenna (log-periodic antenna) for radiated noise measurements is specified by CISPR 16. The TBMA3 features a radiating element and support boom made of powder-coated aluminum alloy and is a standard-sized logarithmic periodic antenna. It comes with a standard N-type female connector and includes an antenna bracket and mounting adapter. The bottom of the mount adapter has a standard 1/4-inch screw hole, allowing for easy connection to most standard tripods. The TBMA3 is shipped stored in a sturdy carrying case as shown in the photo above.

Company：ウェーブクレスト
Price：Other

EMC Testing
Other measurement, recording and measuring instruments
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

GPS business wireless (for FOMA network use)

Significant reduction in initial introduction costs! GPS business radio using the FOMA network.

GPS data communication and voice radio communication are possible, with the capability for group communication and individual communication in voice communication. It is a system that is attractive due to its low running costs and the fact that no license is required.

Company：エクセリ
Price：Other

Other network tools
antenna
antenna

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ERA Antenna (Standard SMA-P Type) SRA-31F

Perfect for SRD790 and SRD795! High-quality ERA antenna with standard configuration.

● The SRA-31F (SRA31F) is a standard antenna manufactured by Standard Horizon (Yaesu Musen YAESU). ● It is the antenna included in the standard configuration of the Standard Horizon (Yaesu Musen) 3R/3T digital simple radio registered stations SRD790 PKG / SRD790 / SRD790-BT PKG / SRD790-BT, SRD795 PKG / SRD795 / SRD795-BT PKG / SRD795-BT. ● The length of the antenna is approximately 130mm. ● The antenna connector is SMA-P. *For more details, please feel free to contact us.*

Company：エクセリ
Price：Less than 10,000 yen

antenna
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hytera Explosion-Proof Radio Compatible Antenna AN0435H15

HP71XEx IIC and HP79XEx IIC compatible! SMA-J type high-reliability antenna for use in explosion-proof areas.

●AN0435H15 (AN-0435-H15) is an antenna manufactured by Hytera. ●It is an antenna for the Hytera intrinsically safe explosion-proof radios HP71XEx IIC and HP79XEx IIC. ●The antenna connector is SMA-J. *For more details, please feel free to contact us.*

Company：エクセリ
Price：Other

antenna
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vehicle-mounted gutter whip antenna GB-450A(CF)-09

Designed exclusively for Toyota Comfort! High efficiency with 3/4λ design, a vehicle whip antenna compatible with the 400MHz band. Easy to install with gutter mounting and wiring!

The GB-450A(CF)-09 is a 400MHz band vehicle-mounted whip antenna (3D-2V) manufactured by Nippon Antenna. It is designed for the Toyota Comfort. This is a 3/4λ whip antenna for vehicle-mounted radios. *A whip antenna is one that has no directivity and can receive and transmit signals from any angle. The absolute gain is 2.15dB. It comes with an antenna element, a magnetic base, and a 3D-2V coaxial cable (5m). *Connectors are not included. It features an easy-to-thread attachment method, so after threading, you will need to attach a separately sold attachment connector to connect it to the radio. It is mounted on the roof side. It is for a specified frequency within 350-470MHz. *For more details, please feel free to contact our company.

Company：エクセリ
Price：10,000 yen-100,000 yen

antenna
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[400MHz Band] 2-Element Yagi Antenna 2DV-450

Supports 340 to 480 MHz! High-performance 2-element Yagi antenna from Japan Antenna, ideal for fixed stations.

The 2DV-450 (2DV450) is a 2-element Yagi antenna manufactured by Nippon Antenna, designed for the 400MHz band. *The Yagi antenna consists of three rods of different lengths forming a single antenna, with the shorter rod acting as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. *This antenna is primarily used for fixed station radio equipment and is composed of a single directional antenna with an antenna, reflector element, and director element. *It operates at a specified frequency within the range of 340 to 480MHz. The model number changes depending on the operating frequency. - 340-390MHz: 2DV-450 F=340-390 specified - 390-480MHz: 2DV-450 F=390-480 specified *Please specify the center frequency (fo/MHz) when placing your order. *The supply section and element blanket are molded with reinforced resin. *Due to its protruding type design, it can be mounted with rear support. *The recommended mounting bracket for the antenna is C-28-1A. *For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

antenna
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Antenna Element WH-150-84(HE)-09EL

Supports 140-170MHz! Omnidirectional, hole-mount type short element (capacitive grounded λ/4)

● The WH-150-84(HE)-09EL is a 150MHz band element manufactured by Nippon Antenna. ● It is a capacitive grounded λ/4 whip antenna for 150MHz band radios. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. ● It is designed for a specified frequency within the range of 140 to 170MHz. Please indicate the fo (center frequency) in MHz when placing your order. ● It is a hole-mounting type shortened 150MHz band element. ● The feeding part connector has an M6×1 female thread. It is used in combination with the separately sold WH-84-09 kit. * For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

antenna
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

120cm Snow Melting Device with CS Antenna 120CSSKH

120 cm satellite reception CS antenna with snow melting device equipped with a reflector and converter arm, heater, and converter roof.

The 120CSSKH (120-CSSKH) is a 120cm snow-melting device equipped CS antenna manufactured by Nippon Antenna. It is a 120cm type antenna for receiving one satellite with a snow-melting device. This antenna is designed to prevent snow damage, equipped with heaters on the reflector and converter arm, as well as a converter roof. It can be used in combination with various CS converter units. The antenna mount and CS converter unit are sold separately. The compatible mast diameter is φ114.3mm. It is a RoHS compliant product and is compatible with J-Alert. *For more details, please feel free to contact us.*

Company：エクセリ
Price：Other

antenna
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

150MHz Band Element SBR-150S-7-09EL

Omnidirectional without the need for directionality! 150MHz band capacity-grounded, shortened whip antenna (compatible with M6 female thread).

The SBR-150S-7-09EL (SBR150S709EL) is a 150MHz band element manufactured by Nippon Antenna. It is a capacitive grounded λ/4 whip antenna for 150MHz band radios and features a shortened element. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. This is a designated frequency for the 150MHz band. Please specify the fo (center frequency) in MHz when placing your order. The feed point connector is an M6 female thread. Please use it in combination with the separately sold bases SBR-BA3-09 and SBR-BA5-09. * A hex wrench is required for base installation. * For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

antenna
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[AM and Shortwave Radio Compatible] WH-025A(F) (Set)

Wide compatibility from AM broadcasting to shortwave broadcasting! Achieve high sensitivity reception with a highly durable outdoor whip antenna!

The WH-025A(F)(set) is an AM whip antenna manufactured by Nippon Antenna. It is a high-performance whip antenna for radio broadcasting that can receive signals from the AM band to the shortwave band with high sensitivity. A whip antenna is one that has no directionality and can receive and transmit signals from any angle. The elements are made of strong stainless steel, providing excellent durability, and the main body is treated to prevent rust and corrosion. The feeding part at the base of the antenna uses an F-J connector, which is sold separately. It is also possible to waterproof it with the included waterproof cap. Coaxial cables 3C-2V, 5C-2V, and 7C-2V can be connected. The included mounting bracket is compatible with mast diameters from φ40 to φ60 and is to be mounted on the mast. For more details, please feel free to contact our company.

Company：エクセリ
Price：100,000 yen-500,000 yen

antenna
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

60MHz Band Indoor 3-Element Yagi Antenna 3SL-0604

Highly directional and stable reception! 60MHz compatible three-element Yagi antenna for individual use, designed for disaster prevention administrative radio (manufactured by Japan Antenna).

The 3SL-0604 (3SL0604) is a 60MHz band residential 3-element Yagi antenna manufactured by Nippon Antenna. It is a 3-element Yagi antenna for receiving disaster prevention administrative radio communications. *The Yagi antenna is a type of antenna consisting of three rods of different lengths, functioning as a director, driven element, and reflector, which provides high directivity. It was invented in 1926. *The compatible frequency range is 55MHz to 70MHz, and the model number changes according to the operating frequency. - Frequency 55-57.5MHz: 3SL-0604 f:55-57.5 (set) - Frequency 57-60MHz: 3SL-0604 f:57-60 (set) - Frequency 59.5-62.5MHz: 3SL-0604 f:59.5-62.5 (set) - Frequency 62-65MHz: 3SL-0604 f:62-65 (set) - Frequency 64.5-67.5MHz: 3SL-0604 f:64.5-67.5 (set) - Frequency 67-70MHz: 3SL-0604 f:67-70 (set) *For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

antenna
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

400MHz Band Vehicle Antenna HMG-450-5A-09

Easy installation! Perfectly attaches to the roof, with a high gain of 4.15dB, the 3/4λ magnet antenna transmits signals well!

The HMG-450-5A-09 (HMG4505A09) is a high-gain magnetic antenna for vehicles manufactured by Nippon Antenna, designed for the 400MHz band (3D-2V). It is an antenna that can be mounted on the car's rooftop using a magnet. It is a 3/4λ whip antenna for vehicle-mounted radios. A whip antenna is one that has no directionality and can receive and transmit signals from any angle. This is a high-gain antenna with excellent signal transmission capabilities. The absolute gain is 4.15dB. The package includes the antenna element, magnetic base, and a 3D-2V coaxial cable (5m) MG-BA3-09. Note that connectors are not included. It features an easy-to-use attachment method for cable routing, allowing you to connect it to the radio after routing the cable with a separately sold attachment connector. It also includes a folding mechanism. For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

antenna
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thin UHF antenna for terrestrial digital broadcasting UDF90W/UDF90B

Ideal for medium to strong electric field areas! A slim terrestrial digital antenna that can be neatly installed on walls and balconies.

The UDF90W / UDF90B (UDF-90-W / UDF-90-B) is a slim UHF antenna manufactured by Nippon Antenna, designed for medium to strong signal areas. It is an outdoor digital terrestrial antenna suitable for strong and medium signal regions, equivalent to 20 elements, and is capable of receiving digital terrestrial broadcasts (DTV). The UDF90W is white, while the UDF90B is black. It can be easily installed using the included multi-mount on antenna masts, balcony railings, or walls. It can also be installed on steel pipe poles using commercially available stainless steel bands sold separately. This antenna is exclusively for horizontal polarization reception, with a receiving channel range of 13 to 52 channels. The multi-mount is compatible with antenna masts with a diameter of φ22 to 49mm. For more details, please feel free to contact us.

Company：エクセリ
Price：Other

antenna
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Japan Antenna Co., Ltd. Whip Antenna WH-08/2G-L

Compatible with 3G, 4G, LPWA, WiFi, and Bluetooth! A compact external antenna with RoHS-compliant SMA connector type, ideal for IoT devices.

The WH-08/2G-L (WH082GL) is a whip antenna manufactured by Nippon Antenna. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. The WH-08/2G-L is an external antenna for IoT that supports carriers as well as 3G / 4G LTE / LPWA (920MHz), WiFi, and Bluetooth. It has obtained construction design certification. It is a directly mounted antenna. The WH-08/2G-L connector is an SMA-P connector, so it can be connected if the connector on the housing side is an SMA-J connector. It complies with the European environmental regulation RoHS directive. * For more details, please feel free to contact us.

Company：エクセリ
Price：Other

antenna
antenna

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Up to 6 devices can be charged simultaneously" 6-port fast charger BC-197

A six-port rapid charger equipped with a smart charger function that allows simultaneous charging of up to six radios and starts recharging automatically.

The BC-197 is a 6-slot rapid charger made by Icom. It is a 6-slot charger that can charge specific low-power transceivers, digital simple radio registered stations, digital simple radio licensed stations, and general business radios manufactured by Icom. It can charge up to 6 radios simultaneously. It is equipped with LED lamps that allow for easy monitoring of the charging status. The charging lamp lights up orange during charging and green when charging is complete. It features a smart charger function that initiates recharging. Batteries can be charged in both standalone and radio-mounted states. 【Compatible Models】 Digital Simple Radio Licensed Station - IC-DU65B General Business Radio - IC-DV60S1 - IC-DV60S3 - IC-UH38MFT 【Features】 ■ Can charge up to 6 units simultaneously ■ Charging status can be checked with LED lamps ■ Can charge batteries in standalone or radio-mounted states For affordable sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

Company：エクセリ
Price：Other

Other network tools
antenna
antenna

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mobile station vehicle-mounted antenna HMG-260-09EL

A capacity-grounded 3λ/4 whip antenna for use in municipal digital mobile communications and fire emergency digital mobile communications in the 260 MHz band.

The HMG-260-09EL (HMG26009EL) is a high-gain element (MP type) for vehicles manufactured by Nippon Antenna, designed for the 260MHz band. It is an antenna for mobile stations in digital public radio systems, used for municipal digital mobile communications and fire and emergency digital mobile communications. It is a capacitive grounded 3λ/4 whip antenna for the 260MHz band. * A whip antenna is one that has no directivity and can receive and transmit signals from any angle. * It is used in combination with a separately sold base. - When combined with base MG-BA3-MJ-2, it becomes a high-gain magnetic antenna for vehicles in the 260MHz band (5D-2V) HMG-260B-09 F=260-275 (set). - When combined with base MG-BA5-MJ-2, it also becomes a high-gain magnetic antenna for vehicles in the 260MHz band (5D-2V) HMG-260B-09 F=260-275 (set). * The compatible frequency range is 260 to 275MHz. * The connector is MP. * Included accessories: Instruction manual. * For more details, please feel free to contact our company.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
antenna

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Antenna for 150MHz band radio equipment WH-150-3HA-09

Antenna for a 150MHz band radio device with hole-mount installation.

The WH-150-3HA-09 (WH1503HA09) is a rooftop whip antenna (hole-mount type) manufactured by Nippon Antenna for the 150MHz band. It is an antenna for radios operating in the 150MHz band. The element is bent, with a 65-degree angle in the middle of the element. It is a whip antenna that is mounted by drilling a hole, suitable for a vehicle body mounting hole of φ23mm and a mounting plate thickness of 15mm or less. The installation location is on the vehicle's rooftop. *A whip antenna is one that has no directivity and can receive and transmit signals from any angle. It features an NJ connector. It is designed for a specified frequency within the 150MHz range; please specify the center frequency (fo) in MHz when placing your order. This product complies with safety standards. It is made to order; please inquire about the delivery time. Included accessories: one instruction manual. There are also straight NJ connector versions of WH-150-3H-09 with a straight element and WH-150-2H-09 with an L-shaped NJ connector. *For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
antenna

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Antenna for 150MHz band radio equipment WH-150-3H-09

Antenna for a 150MHz band radio device with hole-mounting installation.

The WH-150-3H-09 (WH1503H09) is a whip antenna (hole-mount type) for rooftop use in the 150MHz band, manufactured by Nippon Antenna. It is an antenna for radios operating in the 150MHz band. This is a whip antenna that is mounted by drilling a hole. The mounting hole on the vehicle is φ23mm, and the thickness of the mounting plate is 15mm or less. The installation location is the car's rooftop. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. It uses an NJ connector. It is for a specified frequency within the 150MHz band. Please specify the fo (center frequency) in MHz when placing your order. This product complies with safety standards. It is made to order. Please inquire about the delivery time. Included: One instruction manual. There are also models available with a straight NJ connector bent at a 60-degree angle (WH-150-3HA-09) and an L-shaped NJ connector (WH-150-2H-09). * For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
antenna

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Designated frequency in the 150MHz band] HGW-150-1PN-09

150MHz band λ/2 non-radial type antenna with N-P type connector specifications

●HGW-150-1PN-09 (HGW1501PN09) is a 150MHz 1/2λ element (NP type) manufactured by Nippon Antenna. ●It is a λ/2 non-radial type antenna for radio equipment in the 150MHz band. ●Please use it in combination with the separately sold NJ type base for installation. ●Since it is a specified frequency in the 150MHz band, please specify the fo (center frequency) MHz when placing an order. ●The model number changes based on the frequency. - HGW-150-1PN-09 140-143: Frequency 140-143MHz - HGW-150-1PN-09 143-146: Frequency 143-146MHz - HGW-150-1PN-09 146-150: Frequency 146-150MHz - HGW-150-1PN-09 150-155: Frequency 150-155MHz - HGW-150-1PN-09 155-160: Frequency 155-160MHz - HGW-150-1PN-09 160-165: Frequency 160-165MHz - HGW-150-1PN-09 165-170: Frequency 165-170MHz *For more details, please feel free to contact us.

Company：エクセリ
Price：10,000 yen-100,000 yen

Other network tools
antenna

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

260MHz Band Wideband 5-Element Yagi Antenna 5BD-2502

The arm, element, and bracket are made of stainless steel, making it a high-strength wideband 5-element Yagi antenna for municipal digital mobile communication system fixed stations.

The 5BD-2502 (5BD2502) is a wideband 5-element Yagi antenna manufactured by Nippon Antenna, designed for the 260 MHz band. *The Yagi antenna consists of three rods of different lengths that form a single antenna, with the shorter rod serving as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. *This is a wideband 5-element Yagi antenna for fixed stations in municipal digital mobile communication systems. *The operating frequency range is 260 to 275 MHz. *When placing an order, please specify ft (transmission frequency, MHz) and fr (reception frequency, MHz). *The arms, elements, and brackets are made of stainless steel, providing excellent weather resistance and strength. *The feed point is highly waterproof, ensuring stable performance. *The recommended antenna mounting bracket is C-30. *It comes with an NJ connector, which can be connected if the connector on the radio side is NP. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cover-equipped wideband 5-element Yagi antenna 5BD-930A

Cover-type wideband 5-element Yagi antenna compatible with the new frequency band of 850MHz to 940MHz.

The 5BD-930A is a cover-equipped wideband 5-element Yagi antenna manufactured by Japan Antenna. *The Yagi antenna is a type of antenna consisting of three rods of different lengths that form a single antenna, with the shorter rod serving as a director, the radiating element, and the reflector, making it a highly directional antenna. It was invented in 1926. *The supported frequency range is 850MHz to 940MHz. This antenna is compatible with the new frequency band of MCA after the MCA frequency transition. *The antenna part is fully covered, making it resistant to rain and wind, and it has excellent weather resistance. *As this is a directional antenna that only receives radio waves from a specific direction, please install it according to the direction of the incoming radio waves. *It has a high gain of 10.15dBi. *Please use it in combination with the separately sold MCA Advance connection cable (24m) 5D2V-NP-SMAP-24. *Note: When using outdoors, please waterproof the connector part with tape or similar methods. *The terminal shape is N-J type. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
antenna

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

3-element Yagi antenna 3BD-930 (18MSMA-P) set

SMAP type 3-element for MCA system advance that can be used for transmission and reception corresponding to 850MHz to 945MHz.

The 3BD-930 (18MSMA-P) set is a 3-element MCA Advance SMAP type antenna manufactured by Nippon Antenna. It is a set product that includes the wideband 3-element Yagi antenna (without cover) 3BD-930 and the connection cable for MCA Advance (18m) 5D2V-NP-SMAP-18. Please be sure to connect the included cable 5D2V-NP-SMAP-18 for use. This is a 3-element Yagi antenna mainly used for transmission and reception with MCA Advance. It supports frequencies from 850MHz to 945MHz. The internal part of the feeding section is completely sealed and waterproof. This antenna is a single-directional Yagi antenna with wideband radiating elements, reflecting elements, and guiding elements, offering high gain and sharp directivity. Included accessories: - Feeding cable (30cm) ×1 - Connection cable for MCA Advance (18m) 5D2V-NP-SMAP-18 ×1. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
antenna

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

5-element Yagi antenna 5BD-930 (26MSMA-P) set

SMAP type 5-element for MCA system advance that can be used for transmission and reception corresponding to 850MHz to 945MHz.

The 5BD-930(26MSMA-P) set is a 5-element MCA Advance SMAP type antenna manufactured by Nippon Antenna. It is a set product that includes the wideband 5-element Yagi antenna (without cover) 5BD-930 and the connection cable for MCA Advance (26m) 5D2V-NP-SMAP-26. Please be sure to connect the included cable 5D2V-NP-SMAP-26 for use. This is a 5-element Yagi antenna primarily used for transmission and reception with MCA Advance. It supports frequencies from 850MHz to 945MHz. The internal feeding part is completely sealed and waterproof. This antenna is a single-directional Yagi antenna with wideband radiating elements, reflecting elements, and guiding elements, offering high gain and sharp directivity. Accessories include: - Feeding cable (30cm) ×1 - Connection cable for MCA Advance (26m) 5D2V-NP-SMAP-26 ×1. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. For more details, please feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
antenna

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

60MHz Band 5-Element Yagi Antenna 5DV-0608

60MHz band 5-element Yagi antenna suitable for both transmission and reception for BCP measures.

The 5DV-0608 (5DV0608) is a 60MHz band 5-element Yagi antenna manufactured by Nippon Antenna. * The Yagi antenna is a type of antenna made up of three rods of different lengths, functioning as a director, driven element, and reflector, which provides high directivity. It was invented in 1926. * This is a 5-element Yagi antenna suitable for both transmission and reception, designed for municipal disaster prevention administrative radio use. * It is a representative antenna of single directivity, mainly composed of an antenna, reflector element, and director element. * The appearance is simple, with the supply section and element blanket molded from reinforced resin. * It operates at a specified frequency within the range of 54 to 75MHz. The model number varies depending on the frequency band. - 5DV-0608 68.2-69.8MHz - 5DV-0608 55-66MHz When placing an order, please specify the center frequency (fo) in MHz. * The connector is NJ. * The compatible antenna mounting bracket is F-1 (round)-K2 (D). For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. * For more details, feel free to contact our company.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

400MHz Band 3-Element Yagi Antenna 3SBD-4502

A 3-element Yagi antenna that can share two frequencies with a frequency interval of 48 MHz or less within the range of 330 to 470 MHz.

The 3SBD-4502 (3SBD4502) is a wideband 3-element Yagi antenna manufactured by Nippon Antenna for the 400 MHz band. *The Yagi antenna is a type of antenna that consists of three rods of different lengths, functioning as a director, driven element, and reflector, providing high directivity. It was invented in 1926. *This is an antenna for radio equipment. *It is a 3-element Yagi antenna that can share two frequencies within the 330-470 MHz range with a frequency spacing of less than 48 MHz. *When placing an order, please specify ft (transmission frequency, MHz) and fr (reception frequency, MHz). *The connector is NJ. *The compatible mounting brackets for the antenna are C-31(B) and C-19(B). For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. *For more details, feel free to contact us.

Company：エクセリ
Price：100,000 yen-500,000 yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

400MHz Band Directional 6-Element Collinear Antenna 6DA-450

Directional 6-segment collinear antenna with lightning protection at specified frequencies within 330-470 MHz.

The 6DA-450 is a directional six-stage collinear antenna with a lightning rod manufactured by Nippon Antenna for the 400 MHz band. It is an antenna for fixed station radios. The frequency is a specified frequency within the range of 330-470 MHz (UHF band). Please specify the center frequency (fo) in MHz when placing your order. It features a stacked dipole antenna on a stainless steel mast, providing high gain and durability. It is equipped with a lightning rod. This antenna has a cardioid radiation pattern, which means that the shape of the directional diagram resembles a heart (cardioid), with the strongest radiation in the front direction. The gain is 11.15 dBi. The antenna length is approximately 5.77 m. It weighs 35 kg. The antenna side connector is an N-J type. Note that the antenna side connector is only N-J; it can be converted to other connectors using an extension coaxial cable. An 80 cm coaxial 8D-2V cable extends from the antenna. The antenna mounting brackets B-4-1 and B-8-1(C) are compatible. For more details, please feel free to contact us.

Company：エクセリ
Price：500,000 yen-1 million yen

Other network tools
antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

antenna Product List and Ranking from 93 Manufacturers, Suppliers and Companies | IPROS GMS

antenna Manufacturer, Suppliers and Company Rankings

antenna Product ranking