Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.
601～612 item / All 612 items
Lightweight and high-strength fiberglass cover adopted 920MHz band whip antenna.
ZM0925S: 4.8dBi approximately 455mm ZM0922S: 2.14dBi approximately 193mm Fiberglass cover Adopts a lightweight and high-strength fiberglass cover SMA connector Uses SMAP (plug) connector
Adoption of a lightweight, high-strength fiberglass cover dual whip antenna for 169MHz/920MHz bands.
ZM0925S-169: [169MHz] 2.14dBi / [920MHz] 4.8dBi approximately 455mm ZM0922S-169: [169MHz] 2.14dBi / [920MHz] 2.14dBi approximately 455mm Fiberglass cover Adopts a lightweight and high-strength fiberglass cover SMA connector Uses SMAP (plug) connector
It can be used for identifying electric field strength in the field! It was made to weigh less than 500g.
The "JSW0318PD_Wing" is a broadband PCB rigid antenna with a frequency range of 0.45 to 15.5 GHz. There is a common perception that conventional broadband double rigid antennas are very heavy, but this product is made with a dielectric substrate. While typical aluminum die-cast models weigh around 3 kg, this product has been made to weigh less than 500 g. 【Specifications (excerpt)】 ■ Impedance (Ω): 50 ■ Polarization: Linear ■ Directional antenna ■ Gain (dBi): ≦ +8.0 ■ VSWR: ≦ 3.0 *For more details, please refer to the PDF document or feel free to contact us.
Antenna sheet that enables wireless charging!
This is an antenna sheet for a wireless charger that achieves high charging efficiency.
This is an antenna specially designed for IoT devices equipped with a small grand plane.
The PCS.50 is equipped with an RF switch that adjusts the antenna's resonant frequency according to the device's requirements. *Please note that the RF switch must be purchased separately. By adjusting the antenna's resonant frequency to the desired operating frequency band, the antenna can cover the entire spectrum of the 4G LTE band. This allows the device to utilize the correct frequency band required for the wireless module.
![Michi Biki L6 compatible GNSS antenna, magnetic type [New Release]](https://image.mono.ipros.com/public/product/image/a32/2001121060/IPROS53016855499661143479.png?w=280&h=280)
This single unit supports all GNSS frequencies. Since it is a magnet type, installation is much easier than the traditional screw mount!
Supports a wide range of frequencies with an all-band GNSS antenna. Being a magnet type, it can be easily moved after installation. It is compatible with L6, ensuring high accuracy. With an IP67 waterproof rating, it can be used outdoors with peace of mind. Since it is all-band, it is compatible worldwide and can position with any satellite. *Note: The module must be compatible with the satellite for this to work.
![UHF Band RFID Flat Antenna [Line Management]](https://image.mono.ipros.com/public/product/image/2057660/IPROS3444067921193855446.jpg?w=280&h=280)
From project management to tool management, readable across a wide range! For efficient and accurate production line construction.
The "FP9207/FP9207L-2" is a standard model of "UHF band RFID antenna" that achieves high gain while being compact. It is available in circular polarization with the "FP9207" and linear polarization with the "FP9207L-2," and it can also support waterproof types, making it applicable for production line process management and tool management. 【Features】 ■ Compact size allows for high flexibility in installation locations ■ Available in both circular and linear polarization, making it easy to integrate into existing systems ■ Waterproof options available for excellent usability ■ Long communication range allows for simultaneous reading of multiple tags ■ Capable of efficient reading over a wide area *For more details, please refer to the PDF document or feel free to contact us.
![UHF Band RFID Spot Antenna [Smart Management for Labor Savings]](https://image.mono.ipros.com/public/product/image/2057660/IPROS14402832050518404859.jpg?w=280&h=280)
Read only the targeted RFID tags! It is suitable for narrow production lines where you want to limit the reading range and reduce misreads.
The "FSP9203" is an antenna suitable for applications that want to limit the reading area. It has a sharp directional focus, allowing it to read only the tags directly in front of the antenna, and since it is not a proximity type, the reading area extends vertically as well. 【Features】 ■ Accurate inventory management by reading only the desired tags ■ Cost reduction by eliminating the need for a radio absorption zone ■ Real-time product tracking enables pinpoint identification in case of issues ■ Smart management achieved by reading multiple tags at once in a narrow area *For more details, please refer to the PDF document or feel free to contact us.
![UHF Band RFID Mat Antenna [Centralized Management of People Entering and Exiting]](https://image.mono.ipros.com/public/product/image/2057660/IPROS3670300272699795132.jpg?w=280&h=280)
Monitor the entry and exit of people! A UHF band RFID antenna that can be easily installed just by placing it under the carpet.
The FP9211 is ultra-thin and lightweight, with a thickness of less than 5mm, making installation and movement easy. Its directional focus makes it suitable for applications such as entry and exit management. 【Features】 - Detects the entry and exit of individuals with tags simply by passing over the mat. - Lightweight mat type requires no installation, making setup and relocation easy. - Uses orthogonal linear polarization, allowing for wide compatibility with tag orientations and enabling long-distance reading. *For more details, please download the PDF or feel free to contact us.
Compatible with GPS/Glonass/Galileo/BeiDou/QZSS (Michibiki). A highly reliable product with a track record of adoption by automobile manufacturers.
A compact, high-precision patch-type GNSS antenna with excellent multipath resistance. It can be used for position capture in drones and construction machinery, as well as for displacement observation for disaster prevention and mitigation on slopes and structures. 【Specifications (excerpt)】 ■ Operating temperature: -30℃ to +85℃ ■ Dimensions: 35.5×30.4×11.7mm ■ Cable length: 5000mm (can be changed upon consultation) ■ Weight: approximately 25g (excluding cable and connector) ■ Waterproof: Compliant with JIS D0203 S2 *For more details, please refer to the PDF document or feel free to contact us.
Improves the stability of other RF signals! Active antenna compatible with GPS and GLONASS satellites.
The "Bullet GG" is an active antenna compatible with GPS and GLONASS satellites, equipped with a 35dB preamplifier (DC5V) and a 30dB preamplifier. The F-type or TNC antenna connector is located inside a screw socket, and the antenna cable can be routed through the mounting pole, protecting the cable connection. The socket is compatible with 1-inch-14 threads (typical for marine antennas) as well as 3/4-inch pipe threads. 【Features】 ■ Captures GPS and GLONASS satellites ■ Adds GNSS RF signals to marine GNSS navigation systems ■ All-weather design package ■ Antenna cable can be routed through the mounting pole ■ Equipped with a 35dB preamplifier (DC5V) and a 30dB preamplifier *For more details, please refer to the related link page or feel free to contact us.
【Support for Electronic Component Procurement】 We support the urgent procurement of discontinued products (EOL products) and hard-to-obtain electronic components and semiconductors! We have established a thorough inspection system.
Are you looking for this model number product? ■Manufacturer: TI ■Model number: RI-ANT-S02C Owen Corporation quickly procures electronic components that have become difficult to obtain due to production discontinuation or delivery issues from a global network. We will definitely issue a quotation, so you can confirm the details before placing an order, giving you peace of mind. A veteran inspector who has monitored market distribution inventory for over 20 years conducts inspections, and only products that pass are shipped. All delivered items come with an inspection report. 【Our Inspection System】 ■X-ray Inspection Non-destructive testing to check internal structures and detect counterfeit or substandard products. ■Microscope Careful examination of lead bending and any discrepancies in printed fonts. ■Digital Caliper Dimension measurement in 0.01mm increments to detect cleverly manufactured counterfeits. ■Curve Tracer Displays the voltage and current characteristic waveforms between terminals on the screen to detect defective products. ★Please visit our website from the link below. ★You can view our company brochure from the download button below. ▼For other model numbers you can inquire about, please refer to the lineup below.
