Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 154 items
The GPS re-radiation antenna re-radiates GPS signals received outdoors into the indoors in real time.
Features - GPS L1 band signal (1575.42MHz +/-1.023MHz) re-radiation system - Outdoor GPS antenna with IP66 dust and water resistance - Re-radiation distance of 10m - Cable length of 40m - Operating temperature -30 to 85℃
Real-time retransmission of GPS, GLONASS, BEIDOU, GALILEO, and QZSS (Michibiki) signals received outdoors to indoors.
Features - GPS+GLONASS+BEIDOU+GALILEO+QZSS (Michibiki) L1/L2/L5 band signal (1559–1610MHz, 1164MHz–1283MHz) re-radiation system - Outdoor GPS antenna with IP66 dust and water resistance - Re-radiation distance up to 30m (maximum) - Cable length up to 150m (maximum) - Operating temperature -30 to 80℃ - Screw mounting
High precision positioning with an error of a few centimeters is possible with RTK2B support.
- Survey-grade dual-band (L1, L2/E5b/B2I) active GNSS antenna - Compatible with GPS, GLONASS, Galileo, BeiDou - Compatible with all simpleRTK2B boards and market multi-band GNSS receivers - Outdoor GNSS antenna with IP66 dust and water resistance - Operating temperature -40 to 85℃ - RoHS compliant
[Application Example] Enabling communication in narrow areas by utilizing transmission power adjustment and reception sensitivity adjustment functions.
The DSRC roadside system ME9300 is a system that utilizes ETC (Electronic Toll Collection) used on highways. It communicates with the ETC onboard unit installed in vehicles to obtain a unique ID known as the Wireless Call Number (WCN). By verifying this WCN, it can be applied to vehicle entry and exit management and road congestion surveys between two points. Here, we will present the main features and applications of ME9301V. 【Product Introduction】 ■ DSRC Antenna ME9301V ■ Interface Box ME9302 ■ Dedicated I/F Cable (15m) ME9303 *For more details, please refer to the PDF materials or feel free to contact us. *For more details, please refer to the PDF materials or feel free to contact us.
Bicolored antenna
The Baikoro Log Antenna Series is ideal for measuring electromagnetic field strength and radio interference over a wide bandwidth from 20 MHz to 3 GHz. It is a compact (approximately 35cm x 16cm x 14cm), lightweight (approximately 350g) high-performance antenna that requires no assembly and is convenient for portable use. ◆ Excellent Design and Lightweight From materials to shape, meticulous computer simulations and countless prototype evaluations have broken the conventional wisdom of traditional pole antennas, resulting in this lightweight and elegant design. Within its beauty lies a complete sealing that ensures the antenna's quality and performance are maintained, effectively protecting the sensitive antenna from moisture, dust, and mechanical damage. ◆ Superior Bandwidth The antenna is equipped with built-in flash memory to ensure reliable electrical characteristics. This memory stores information such as model name, serial number, and calibration chart. With this cutting-edge design philosophy, an astonishing bandwidth of 380 MHz to 18 GHz has been achieved. Please select the optimal model from 16 different antennas tailored for various applications and frequencies.
Hybrid EMC antenna for EMC/EMI testing, 20MHz and above.
The HyperLOG-EMI is the perfect EMC hybrid antenna for professional users. It features unparalleled "high accuracy," "ultra-high gain" that exceeds the full frequency range, and "the latest design and technology." The HyperLOG-EMI series leverages the latest antenna technology, combining the advantages of biconical antennas and log-periodic antennas into a high-end EMC/EMI antenna. It provides an extremely high accuracy of 0.3dB that exceeds the full frequency range, making it suitable for use as a reference antenna. By using the HyperLOG-EMI antenna, you can avoid the EMI and EMC measurement error rates typically seen when switching between different measurement antennas, allowing you to use just this one HyperLOG-EMI antenna to achieve a complete frequency range without the need for multiple antennas. Not needing to use multiple antennas also leads to reduced measurement time and costs. The HyperLOG-EMI series can also be used as a powerful broadcast antenna with a maximum of 310 watts. It is also ideal for immunity measurements requiring ultra-high electromagnetic field strengths of over 10V/m.
Perfectly solving three-dimensional measurement! Weighing only 350g, the world's first handheld three-dimensional isotropic antenna. 9KHz～
The IsoLOG3D mobile antenna is an ultra-lightweight and compact isotropic antenna compatible with various spectrum analyzers. It excels in three-dimensional measurements within a limited time. This antenna does not require software installation, power connections, or hardware modifications. It can be connected to any spectrum analyzer or oscilloscope using an N (male) connector. The IsoLOG3D mobile antenna has a built-in rechargeable battery that allows for 6 hours of use. It also features a switchable low-noise bypass preamplifier. The amplifier is capable of measuring very low output signals, making it highly effective. Control of the antenna can be done manually via USB or through the antenna selection mode, so a USB connection is not necessary.
Designed for radiated emission measurements in the frequency range of 9 kHz to 30 MHz in accordance with CISPR 16.
The loop antenna TBMA6-P is designed for measuring radiated emissions in the frequency range of 9 kHz to 30 MHz in accordance with CISPR 16. The diameter of the loop is 60 cm, providing sufficient sensitivity to perform all relevant measurements specified in the corresponding CISPR standards for the frequency range of 9 kHz to 30 MHz. The loop is constructed from coaxial cable and is attached to the transducer with an N connector. This design allows for flexible use with various loop diameters. An attachment with a ¼-inch screw allows it to be connected to a standard tripod.
Hybrid measurement antenna combining a biconical antenna and a log-periodic antenna.
The TBMA8 is an affordable hybrid measurement antenna that combines a biconical antenna and a log-periodic antenna, covering a frequency range from 30 MHz to 3 GHz, and is intended for radiated emission EMC pre-compliance testing. The TBMA8 has characteristics from 30 MHz to 3000 MHz and features standard VSWR values and antenna factor values for hybrid measurement antennas. The TBMA8 is an average-sized hybrid antenna made of aluminum alloy for the radiating elements and support boom. It is equipped with a standard female N connector and comes with two triangular bowtie elements. The antenna includes a mounting shaft (tube) with a diameter of 20 mm. Optional accessories such as an adjustable mounting element and tripod are also available. The TBMA8 is shipped in a sturdy carrying case.
A cost-effective log-periodic measurement antenna with characteristics ranging from 150 MHz to 3000 MHz, targeting pre-compliance testing for radiated noise EMC.
The TBMA7 is an affordable log-periodic measuring antenna targeted for radiated noise EMC pre-compliance testing. The TBMA7 has characteristics ranging from 150 MHz to 3000 MHz, with VSWR and antenna factor values that are standard for log-periodic measuring antennas. The TBMA7 is an average-sized log-periodic antenna made of aluminum alloy for the radiating elements and support boom. It is equipped with a standard female N connector and comes with an antenna bracket and mount adapter. The standard 1/4 inch thread at the bottom of the mount adapter allows for easy connection to most standard tripods. The TBMA7 is shipped in a sturdy carrying case, as shown in the photo above.
A large loop antenna with three orthogonal loops as required by ISPR16-1-4 and CISPR 15 / EN 55015.
It is used to measure the current induced by the magnetic field emitted from the lighting fixture. Section 4.4 of EN 55015 specifies the test setup and measurement procedures. It consists of three vertical 2-meter diameter loop antennas on three orthogonal planes (X/Y/Z), installed on a lightweight hollow WPC frame with a total height of 2.5 meters. The lowest point of the loops is 0.5 meters above the ground, and each loop element receives magnetic field radiation that is perpendicular to the accommodating plane, generating a voltage signal at the output port of the RF transducer connected to the loop, proportional to the intensity of the H-field radiation. It is equipped with three TekBox TBCCP1-2K70 coaxial RF current monitoring probes with a flat transfer impedance of 0 dBΩ (1V/A) from 9 kHz to 30 MHz at a 50Ω load. The kit includes all necessary coaxial cables, ferrite clamps, a manual RF coaxial switch for selecting loops, and a TBTP3 tripod with a plastic DUT support plate.
Marine high-gain 2-band non-radial antenna for base stations (repeater compatible)
The SE50 (SE-50) is a marine and base station ground plane antenna manufactured by Daiwa (Diamond). It is a high-gain dual-band non-radial antenna for the 144/430 MHz band (repeater compatible). *Non-radial refers to a type of radio communication antenna that does not require a ground connection. The antenna length is approximately 2 meters. Made of fiberglass, it has high tensile strength and elasticity, making it robust. The power input rating is 100W. It is D-STAR compatible. The connector is MJ. For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. *For more details, feel free to contact our company.
Antenna for the HP708 portable radio for onboard communication, compliant with the US explosion-proof standard UL 913 and the Canadian explosion-proof standard CSA 22.2.
●AN0435H25 (AN-0435H-25) is an antenna manufactured by Hytera. ●It is an antenna for the HP708 portable radio used for onboard communication, compliant with the US explosion-proof standard UL 913 and the Canadian explosion-proof standard CSA 22.2. ●It is a standard component of the HP708 main unit and can be purchased as a spare or replacement. ●The antenna length is 9 cm. ●The antenna connector is SMA-J. ●It is compatible with GPS/Glonass. ●It supports frequencies of 400–470 MHz and 1575 MHz. ●It complies with the European environmental regulation RoHS. *For more details, please feel free to contact us.*
