We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for cam.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

cam Product List and Ranking from 42 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Nov 12, 2025～Dec 09, 2025
This ranking is based on the number of page views on our site.

cam Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Nov 12, 2025～Dec 09, 2025
This ranking is based on the number of page views on our site.

  1. システムクリエイト Osaka//Industrial Machinery
  2. null/null
  3. アルビテクノロジー 本社テクニカルセンター Gunma//CAD/CAM
  4. 4 C&G SYSTEMS INC. Tokyo//software
  5. 5 null/null
Go to Company Ranking

cam Product ranking

Last Updated： Aggregation Period:Nov 12, 2025～Dec 09, 2025
This ranking is based on the number of page views on our site.

  1. NC Cutting Machine P-CAM120C/160C/180C
  2. I tried converting the Mazatrol dialogue data into G-code! システムクリエイト
  3. AI搭載ツール CAM Assist for Mastercam
  4. 2-axis/3-axis/5-axis CAD/CAM system 'hyperMILL' アルビテクノロジー 本社テクニカルセンター
  5. 4 CAM system "ESPRIT" エイキューブ

cam Product List

31～45 item / All 89 items

Displayed results
NAZCA5 CAM Lathe for 2D CAM NC lathe processing

NAZCA5 CAM Lathe for 2D CAM NC lathe processing

Packed with useful features unique to CAM for NC lathes! It strongly supports the creation of NC lathe data with trajectory generation that considers safety and a wealth of machining patterns.

＼Outstanding operability and simple, easy-to-understand features strongly support data creation for NC lathes／ We provide numerous easy-to-understand illustrated screens, allowing for operation without confusion, while also considering air cut measures and safety. ■ Air Cut Measures ・Material shape recognition ・Trajectory area avoidance ■ Safety and Security Measures ・Interference prevention with barriers ・Interference prevention through two-stage escape ■ Compatible Machines ・Can switch between vertical and mirror modes ・Supports coordinate axes for horizontal lathes, vertical lathes, and more ■ Abundant Processing Patterns ・Numerous processing patterns suitable for lathe machining ■ High-Precision Processing ・Separate allowance settings for X/Z ・Reduces unevenness on the machined surface ■ Simulation ・Displays not only the chips but the entire tool to check for interference in the axis parts ■ Register and Reuse Data ・Allows registration of any tool shape ・Can be used according to the manufacturer of NC machine tools *NAZCA5 CAM Lathe is the successor product to the Nasca Pro Lathe. ＜Trial＞ We offer a trial version that allows you to test all the functions of the genuine product as many times as you like within the usage period! Please feel free to contact us.

  • 2D CAM

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
GO2cam User Case

GO2cam User Case

We would like to introduce examples of customers who are using GO2cam.

The 3D CADCAM system GO2cam for machining mechanical parts creates NC programs for milling, drilling, lathe processing, and wire cut electrical discharge machining from 2D CAD data and solid data, ranging from 2-axis to 5-axis.

  • 3D CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Feature-based Solid CAM CAMWorks

Feature-based Solid CAM CAMWorks

SolidWorks complete add-on! Feature-based SolidCAM!

This is a total support CAM system for 2D pockets, hole processing, simultaneous 5-axis machining, lathe processing, machining centers with 4 and 5 axes, wire cutting, and composite lathes. It is equipped with a function that automatically recognizes and distinguishes various shapes on a 3D solid model. It automatically extracts common machining characteristics (pockets, bosses, holes, islands) and lathe processing characteristics (front, outer diameter, inner diameter) found within the solid model. For other features and details, please feel free to download the catalog or contact us if you have any questions. Marble Co., Ltd. Embedded Products Division, Product Business Department Phone: (03) 3419-6011

  • Other CAM related software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2.5D CADCAM CAMCORE EX

2.5D CADCAM CAMCORE EX

Manage drawings and processing data in the same file! Outstanding editing capabilities for processing data in CAM.

CADCAM features that dramatically improve design and manufacturing work efficiency! User-friendly operation that even beginners can easily handle! By managing drawings and machining data within the same file, it allows for immediate NC data creation after modifying necessary items such as processing conditions, machining paths, and process sequences. For other features and details, please feel free to download the catalog or contact us for any questions or to request a trial version. ■ Contact Information Marble Inc. Embedded Products Division, Product Business Department Phone: (03) 3419-6011

  • Other CAM related software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SolidWorks Fully Compatible CAM SolidCAM

SolidWorks Fully Compatible CAM SolidCAM

SolidWorks fully integrated CAM system! Plugin to CADSUPERWorks!!

We provide a seamless operating environment that supports milling machines capable of fixed 4/5 axes from 2 axes, simultaneous 5 axes, compound lathes compatible with Y/C/B axes, wire cutting compatible with simultaneous 4 axes, and can be realized by adding to SolidWorks (CADSUPERWorks). For other features and details, please feel free to download the catalog or contact us with any questions. Marble Co., Ltd. Embedded Products Division, Product Business Department Phone: (03) 3419-6011

  • Other CAM related software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CAM system for laser processing machine - DXF-L -

CAM system for laser processing machine - DXF-L -

CAM system for laser, plasma, and water jet.

1. You can issue processing instructions for closed shapes, open shapes, punches, scribing, and more. 2. The approach position can be set to the midpoint of elements, arbitrary positions, or corners. 3. For thick plates, special processing conditions can be set for the approach section. Instructions for corner loops and wire joints can also be issued. 4. Codes for exact stops can be automatically output for corner sections within specified angles. 5. Since you can freely create post-processors, it can accommodate machines from any manufacturer. 6. Processing conditions can be registered for each plate thickness and material. 7. There are three methods to output processing conditions: automatically determining the size of the shape being processed and outputting conditions based on size, automatically determining the length of elements and outputting conditions for each element, and outputting processing conditions divided into holes and outlines. 8. Special codes can be output for each size of shape. Even if the elements of the shape are spaced apart, NC data can be created that connects them as long as they are within the set parameters. 9. Since piercing processing can be output together, piercing can be done with oxygen while cutting can be done with nitrogen.

  • Plastic processing machines (cutting and rolling)
  • Other processing machines
  • 2D CAM

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wire Cut CAM System - DXF-W

Wire Cut CAM System - DXF-W

A wire cutting CAM system equipped with a variety of features and compatible with numerous manufacturers.

1. You can specify processing instructions for closed shapes, open shapes, coreless designs, and upper and lower irregular shapes. 2. For each shape, you can set processing patterns, processing conditions, number of processing cycles, and tapers. 3. Since combinations of processing patterns, processing conditions, and number of processing cycles can be made, plate processing data can be created as a single NC data. 4. You can approach any position of a closed shape. 5. The processing direction for multiple processing can be reversed. 6. By setting multiple residuals during multiple processing, high-precision processing can be achieved without leaving marks on the approach area. 7. Since cutting conditions can be set, it can accommodate polishing finishes in the approach area. 8. For the finishing of coreless processing, tapers and multiple processing can be set. Micro shapes that cannot have pilot holes can be approached from the outside for coreless processing. 9. Processing of upper and lower irregular shapes can be done for closed shapes and open shapes (multiple processing is also possible). 10. Partial conditions and partial tapers can be easily set.

  • Other machine tools
  • 2D CAM

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D Wire Cut CAM System 'TopSolid'Wire'

3D Wire Cut CAM System 'TopSolid'Wire'

Consolidating processing for multiple faces and edges into a single step! Achieving seamless integration from design to manufacturing.

TopSolid'Wire operates on the CAD system TopSolid, eliminating the need for complicated data conversion tasks. When you modify a shape, the wire paths and processing drawings are automatically updated, preventing rework and mistakes. Additionally, it allows for efficient wire cutting design based on the situation of the acquired data, including wire processing with a constant taper angle using 2D curves, creating upper and lower shapes using two curves, and directly selecting faces of 3D models to create wire paths. 【Features】 ■ Easy to use, easy to learn ■ Powerful CAD functions ■ Standardization of processing through methods ■ Consolidation of processing for multiple faces and edges into one step ■ Built-in machine simulation ■ Interference checks for all fixtures and machines ■ Automatic creation of graphical processing instructions ■ Automatic correction of wire paths during design changes ■ Management of product shapes and NC data with built-in PDM ■ Realization of a seamless process from design to manufacturing *For more details, please refer to the PDF materials or feel free to contact us.

  • 3D CAM

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
The most suitable CAM for multi-axis control and complex lathes "ESPRIT"

The most suitable CAM for multi-axis control and complex lathes "ESPRIT"

High-performance/high-quality CAM system compatible with all types of machine tools.

The CAM software that maximizes the performance of multi-axis lathes, Swiss-type automatic lathes, and composite lathes is "ESPRIT." The ESPRIT CAM system provides effective NC programs for all CNC machine tools.

  • 3D CAM
  • lathe
  • Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Layered manufacturing compatible CADCAM system "CAM-TOOL AM"

Layered manufacturing compatible CADCAM system "CAM-TOOL AM"

Innovation in manufacturing with "CAM-TOOL" that goes beyond milling!!

～ Fusion of Reliable Technology Developed So Far ～ "CAM-TOOL AM" is a composite CAM system compatible with simultaneous 5-axis control, equipped with a new processing mode that generates additive manufacturing paths using either the DED (Directed Energy Deposition) method or the MEX (Material Extrusion) method. It allows for a new process design that combines additive manufacturing (additive processing) and traditional cutting processes (subtractive processing) within a single system. The additive process achieves operations similar to those of traditional cutting, enabling operators to create data from shape settings to path output without any special operations. CAM-TOOL contributes to new manufacturing by merging the reliable technology developed through cutting with advanced technology. AM: Abbreviation for Additive Manufacturing.

  • 3D CAM
  • Other CAM related software
  • 3D Printer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Design and Prototyping CAM System "Craft MILL"

Design and Prototyping CAM System "Craft MILL"

Simple multiple-choice operations that can be used by designers and planners.

Craft MILL is equipped with a database based on experimental values for tool and material settings, which are considered difficult to configure. Therefore, all tasks leading up to outputting processing data are done through a selection method, allowing anyone to use it easily and safely. Of course, detailed parameter settings for professional use are also available, so it can adequately handle advanced processing as well.

  • 3D CAM
  • Prototype Services
  • 3D Printer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
H.A.T. Water Jet Cutting Processing, CAD/CAM

H.A.T. Water Jet Cutting Processing, CAD/CAM

Numerous achievements in various industries! It is a very gentle cutting method.

○ Water Jet Cutting Processing Water is injected from a small diameter nozzle at ultra-high pressure (245-343 MPa) to utilize the kinetic energy of the high-speed water jet (jet stream) for cutting. The injection speed of the ultra-high pressure water, pressurized by an ultra-high pressure pump, reaches three times the speed of sound (approximately 700-800 m/s), allowing for the cutting of various materials into free shapes, regardless of hardness or size. ○ CAD/CAM SYSTEM We create machining data for jigs and products from raw data. We edit 3D and 2D data and send it to various machines to shape the products. 【Features】 ＜Water Jet Cutting Processing＞ ○ No stress applied ○ No thermal effects, thus no deformation ○ Minimal burrs, allowing for cutting that feels like using scissors ○ No material change (thermal effects) on the cut surface, making secondary processing easy ＜CAD/CAM SYSTEM＞ ○ 3D software for 5-axis machining 　→ Using Hyper Mill from Open Mind Technologies For more details, please contact us or download the catalog.

  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PCB Integrated CAM System 'PC-AutoCAM'

PCB Integrated CAM System 'PC-AutoCAM'

Achieving high performance in functionality, accuracy, and cost!

The PCB integrated CAM system "PC-AutoCAM" is an all-in-one CAM system that includes all the necessary functions for printed circuit board manufacturing. It is equipped with various features such as "Gerber data editing," which allows input and output of various data used for handover with different CAD/CAM systems, DFM data analysis, and metal mask data editing. This system meets the needs for high precision, high quality, and large-capacity data processing, significantly shortening the lead time from design to manufacturing and improving productivity. 【Features】 ■ Gerber Data Editing Allows input and output of various data used for handover with different CAD/CAM systems. ■ Panel Layout Optimally arranges single-sided data for the manufacturing work size, making it easy to place necessary accessories. *For more details, please refer to the PDF materials or feel free to contact us.

  • Other CAM related software
  • Software (middle, driver, security, etc.)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to cam

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.