Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
361～390 item / All 666 items
4CH IEEE1394.b Frame Grabber, PCI-E x4
Features - Compliant with PCI Express [x4] - High-speed image transfer rate: 800MB/s - Industrial screw-lock connector - Channel status LED - 4 isolated digital input/output - 4 isolated TTL level programmable trigger output pulses
1CH HDMI Video & Audio Capture Card
Features ■ Supports CVBS, S-Video, RGB, and YPbPr video inputs ■ Uncompressed 1920x1080, 60 fps video stream ■ Supports HDMI/DVI video and HDMI, S/PDIF audio inputs ■ Compliant with PCI Express [x4] ■ Supports 24-bit RGB or YUV 4:4:4 ■ HDCP support (High-bandwidth Digital Content Protection) ■ Supports 32/64-bit direct SDK
8CH relay output 16CH isolated digital input
Features - PICMG 2.0 Revision 2.1 - 8-CH SPDT relay - Non-latching relay - Onboard relay drive circuit - Relay output state feedback - 16-CH, isolated DI - Onboard DI low-pass filter processing - 2 external interrupt sources
4-port RS-422/485 serial communication
Features - 32-bit CompactPCI, PICMG2.0 Rev2.1 - Plug and play, IRQ & I/O addresses are automatically assigned by PCI BIOS. - 4 asynchronous communication ports (intelligent buffer) - 4 RS-422/485 ports - 2500 VRMS isolation voltage - Supports multiple operating systems. - Surge protector - Rugged DB37 connector
2-port CAN interface
Features - PICMG 2.0 Rev 2.1 - Operation of two independent CAN networks - Programmable transfer speed up to 1 Mbps - CAN controller frequency 16 MHz - 2500 VRMS optical isolation - Direct memory mapping to the CAN controller - Powerful master interface for CAN bus protocol - Rear I/O available on cPCI-7841R
4/8CH 12Bit Simultaneous Sampling A/D Conversion DAQ Card
■Compliant with PXI 2.0 ■3U Eurocard form factor, compliant with CompactPCI ■12 bit A/D resolution ■Maximum simultaneous update rate of 1MS/s ■4-CH x analog output (PXI-2501) ■8-CH x analog output (PXI-2502) ■Hardware-based arbitrary waveform generation ■Onboard 8k-sample D/A FIFO (PXI-2501)
4CH 16Bit 1MS/s Analog Output & 16CH Isolated Digital Input & 16CH Isolated Digital Output
Features ■ 32-bit PCI bus (3.3V/5V) support ■ Hardware-based waveform generation ■ DNL less than 1 LSB ■ Trigger for digital waveform generation ■ 16-CH isolated digital input & 16-CH isolated digital output ■ 8-CH TTL DI and 8-CH TTL DO ■ 2-CH timer/counter, base clock: 40MHz ■ 4-CH PWM output ■ 3-CH encoder input supporting AB phase and CW/CCW ■ Supports synchronization of multiple cards via SSI bus (system synchronization interface)
8CH 24Bit Maximum 192KS/s Simultaneous Sampling Analog Input Module
Features ◾ 24-bit Sigma-Delta ADC ◾ 8CH simultaneous analog input ◾ Maximum sampling rate 192KS/s ◾ Input range ±1V - 10V ◾ Dynamic range 110dB ◾ Anti-aliasing filter ◾ Input coupling AC/DC (software selectable) ◾ IEPE - 4mA (software configurable)
2CH 14Bit Maximum 200MS/s Digitizer
Features ◾ Compliant with PXI Express Specification Revision 1.0 ◾ Supports 200 MS/s sampling rate and two simultaneous analog inputs with high-resolution 14-bit ADC ◾ Supports analog input up to 90 MHz bandwidth ◾ Equipped with 1 GB of storage memory ◾ Programmable input voltage ranges: ±0.2V, ±2V, ±10V ◾ Includes external digital trigger input/output terminals ◾ Full auto-calibration function included ◾ Supports signal averaging function
4CH 12Bit Maximum 80MS/s Digitizer
Features ◾ Maximum 80MS/s sampling and support for 4-channel simultaneous analog input ◾ High-resolution 12-bit ADC ◾ Analog input (maximum bandwidth 40MHz) with 1GB storage memory ◾ Input voltage range (programmable): ±0.5V, ±1V, ±5V, ±10V ◾ High-speed data streaming support via DMA data transfer scatter-gather ◾ Provides 10/20MHz digital onboard filter (FPGA) ◾ Provides PLL module for accurate synchronization
PCI-E[x4] 2CH GigE Vision PoE+ compatible frame grabber. Supports multiple cards and cameras in a single system.
Features - PCI Express [x4] - Supports 2 Gigabit Ethernet ports - IEEE802.3at PoE+ compliant - Compatible with multiple cards and cameras in a single system - Extended temperature support (0 to 70°C without frame drops) - PoE protection (overcurrent, overvoltage, automatic power supply adjustment) - User-friendly PoE power management utility and API
NVIDIA(R) Quadro(R) RTX8000 GPU equipped, PCI Express graphics card
【Features】 - Interface: PCIExpress 3.0[x16] - Display Output: 4x DisplayPort 1.4 digital video output (DP++) 1x USB Type-C 4x 4096x2160 @ 120 Hz 4x 5120x2880 @ 60 Hz 2x 7680x4320 @ 60 Hz - VirtualLink x1 - Audio output compatible DisplayPort - 3D stereo support - Compatible with Quadro Sync II - NVIDIA nView(R) desktop management software - HDCP 2.2 compliant - NVIDIA Mosaic
NVIDIA(R) Quadro(R) T1000 GPU equipped, mobile PCI Express graphics module
**Features** - Quadro(R) T1000 Embedded Graphics - 896 CUDA(R) cores, 2.6 TFLOPS peak FP32 performance - Memory: 4GB GDDR6, 128-bit, bandwidth: up to 192GB/s - Interface: MXM 3.1, PCI Express Gen3 [x16] - Form factor: Standard MXM 3.1 Type-A (82 x 70 mm) - Display output: 4x DisplayPort 1.4a digital video output (4K @120Hz, 8K @60Hz) - Low power consumption: 50W TGP - 5 years of availability
NVIDIA(R) Quadro(R) RTX3000 GPU equipped, mobile PCI Express graphics module
**Features** - Quadro(R) RTX3000 Embedded Graphics - 1920 CUDA(R) cores, 30 RT cores, 240 Tensor cores - 5.3 TFLOPS peak FP32 performance - Memory: 6GB GDDR6, 192-bit, bandwidth: up to 336GB/second - Interface: MXM 3.1, PCI Express Gen3 [x16] - Form factor: Standard MXM 3.1 Type-B (82 x 105 mm) - Display output: 4x DisplayPort 1.4b digital video output (4K @120Hz, 8K @60Hz) - Low power consumption: 80W TGP - 5 years of availability
NVIDIA(R) Quadro(R) RTX5000 GPU equipped, mobile PCI Express graphics module
**Features** - Quadro(R) RTX5000 Embedded Graphics - 3072 CUDA(R) cores, 48 RT cores, 384 Tensor cores - 9.4 TFLOPS peak FP32 performance - Memory: 16GB GDDR6, 256-bit, bandwidth: up to 448GB/s - Interface: MXM 3.1, PCI Express Gen3 [x16] - Form factor: Standard MXM 3.1 Type-B+ (82 x 110 mm) - Display output: 4x DisplayPort 1.4b digital video output (4K @120Hz, 8K @60Hz) - Low power consumption: 110W TGP - 5 years of availability
Intel I210-AT adopted, energy-saving Ethernet, jumbo frame (9.6KB) support, PD automatic recognition, insulation protection.
Features ■ Uses Intel I210-AT ■ Supplies up to 15.4W per port ■ Supplies up to 30W for independent ports ■ Energy-efficient Ethernet ■ Supports jumbo frames (9.6KB) ■ PD automatic recognition ■ Soft control ■ Isolation protection
Intel 82599ES adopted, energy-saving Ethernet, industrial Ethernet card
Features ■ Uses Intel 82599ES ■ 2 ports of SFP+ 10GbE ■ Supports SR-IOV ■ Supports VMDq ■ Watchdog timer ■ Bypass control possible via software (BPC-54120)
Intel I350-AM4 equipped, energy-saving Ethernet, industrial Ethernet card, bypass control capable.
Features ■ Adopts Intel I350-AM4 ■ SFP + 1GbE 4 ports ■ Supports SR-IOV ■ Supports VMDq ■ Watchdog timer ■ Bypass control possible via software (BPC-52240)
Intel I350-AM4 adopted, energy-saving Ethernet, industrial Ethernet card, equipped with watchdog timer.
Features ■ Uses Intel I350-AM4 ■ RJ45 + 1GbE 4 ports ■ SR-IOV support ■ Watchdog timer ■ Low profile
Intel I210-AT equipped, energy-saving, industrial Ethernet card, with watchdog timer and bypass control capability.
Features ■ Equipped with Intel I210-AT ■ RJ45 1GbE 2 ports ■ SR-IOV support ■ Watchdog timer ■ Low profile ■ Jumbo frame support (9.6KB) ■ Software-controlled bypass capability
Industrial 2/4 Port RS-422/485 Serial Communication PCI Card
Features ■ Smart Buffer 2/4 Serial Communication Ports ■ Isolated RS-422/RS-485 Interface Port Support ■ Supports 8 Cards per System ■ PCI Rev2.1 Plug and Play ■ Compatible with Windows NT/95/98/2000/XP and Linux OS
Industrial PCIe-based serial communication card
Features ■ PCI Express x1 compatible ■ Automatic IRQ & IO address assignment by BIOS ■ PCI Rev2.1 plug and play ■ Supports 2 cards per system, easy configuration without jumpers
4/8/12-channel PCI Express x4 Gen3 USB3 Vision Top Performance Frame Grabber
Features ■ Compliant with PCI Express x4 Gen2 ■ USB 3.1 Gen 1 (same as USB 3.0), host controller compliant with Fresco FL1100 ■ 4/8 USB Type-A external ports (PCIe-U304 / U308) ■ Four additional internal USB 3.0 ports via pin header (only for PCIe-U312) ■ Up to 18W USB power from PCIe bus (default); up to 60W USB power supported via 4-pin Molex power connector ■ Current per port below 1500mA ■ Multiple cards and multiple cameras within a single system ■ User-friendly API provided for software-programmable power on/off per port
4-channel PCI Express x4 Gen3 USB3 Vision Top Performance Frame Grabber
Features ■ Compliant with PCI Express x4 Gen2 ■ 4/8 USB Type-A external ports (PCIe-U304) ■ USB 3.1 Gen 1 (same as USB 3.0), host controller, compliant with Fresco FL1100 ■ Up to 18W USB power from PCIe bus (default); up to 60W USB power supported via 4-pin Molex power connector ■ Current per port below 1500mA ■ Multiple cards and multiple cameras within a single system ■ User-friendly API provided for software-programmable power on/off per port
PCIe x8 slot compatible, equipped with Intel XL710, 4-channel PoE+LAN expansion card supporting 10GbE.
Features ■ 10GbE image processing board equipped with Intel XL710/Intel X550-AT2 10GBASE-T, featuring 4ch/2ch PoE+LAN and achieving a maximum bandwidth of 10Gbps ■ Compatible with PCIe x8 (PE-5004) and PCIe x4 (PE-5002) slots (PCIe 3.0, 8 GT/s) ■ Compliant with IEEE 802.3at standard (PoE+), capable of supplying up to 25.5W/48V per port, with On/Off control functionality ■ IEEE 1588 high-precision time synchronization protocol (PTP) and IEEE 802.3AS high-precision timing synchronization ■ Supports jumbo frames up to 9.7K and link aggregation (LAG) ■ Energy-efficient Ethernet with power management features, compliant with IEEE 802.3az (Energy Efficient Ethernet/EEE), and supports DMA core-lessing • NBASE-T technology capable (supports 2.5/5.0 GbE with CAT 5e/CAT 6 cables) ■ Operating temperature range of -25℃ to 55℃
PCIe ×4 slot compatible, equipped with Intel I210, 2ch/4ch PoE+ LAN expansion card compliant with IEEE 802.3at.
Features ■ Supports PCIe ×4 slot ■ Equipped with 4 IEEE 802.3at compliant PoE+ LAN ports powered by 4 Intel I210 chips ■ IEEE 1588 high-precision time synchronization protocol (PTP) ■ Multiple LAN/PoE+/Camera configurations can be expanded within a single system ■ Up to 25.5W/48V power supply per port ■ Supports jumbo frames (9.5KB) and link aggregation (LAG) ■ Operating temperature range of -25℃ to 70℃ ■ Option to add 16 isolated DIO ■ Option for power control to PoE via software
SUMIT expansion card, compatible with 2 10GigE LAN, operating temperature -25°C to 50°C.
Features ■ Intel X550-AT2 10GBASE-T controller supports data transfer speeds of up to 10Gbps ■ Complies with IEEE 802.3an Fast Ethernet standard ■ IEEE 1588 high-precision time synchronization protocol (PTP) ■ Supports IEEE 802.3az to reduce power consumption ■ Supports jumbo frames of up to 9728 bytes and link aggregation ■ Intel Ethernet Flow Director (FD) ■ Intel Virtualization Technology (VT) ■ Operating temperature range of -25°C to 55°C
NVIDIA RTX PRO 6000 BW, 96GB GDDR7, PCIe Gen5 x16, 4x DP 2.1
【ADLINK RTX PRO 6000 Blackwell Workstation Edition Features】 ■NVIDIA Blackwell Architecture ■Equipped with 96GB GDDR7 Memory ■PCIe Gen5 x16 Interface ■24,064 CUDA Cores, 188 RT Cores, 752 Tensor Cores ■Supports up to 4 DisplayPort 2.1 Outputs, TGP 600W ■Designed for Servers and Workstations
NVIDIA RTX PRO 6000 BW, 96GB GDDR7, PCIe Gen5 x16, 4x DP 2.1
【ADLINK RTX PRO 6000 Blackwell Max-Q Workstation Edition Features】 ■ NVIDIA Blackwell architecture ■ Equipped with 96GB GDDR7 memory ■ PCIe Gen5 x16 interface ■ 24,064 CUDA cores, 188 RT cores, 752 Tensor cores ■ Supports up to 4 DisplayPort 2.1 outputs, TGP 600W ■ Designed for servers and workstations
3U VPX/VPX-REDI ExpressReach PMC/XMC Carrier Card
The VPX3-215 ExpressReach 3U VPX carrier card is a member of the 3U VPX line of embedded ruggedized products. Designed to integrate with Curtiss-Wright’s PCI mezzanine cards (PMCs), this fully ruggedized carrier card expands functionality of its host single board computer by providing the ability to expand IO capability without requiring additional SBCs as well as acting as a switch to switch data between up to 4 PCI Express ports.
