Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
346～360 item / All 644 items
8CH High Power Relay & 8CH Isolated Digital Input Module
Features - 8-channel high-power relay output (5A @ 250VAC or 30VDC) - 8-channel AC filter isolated digital input - 1-channel emergency stop input - Pluggable connector for high current input - Supports universal, 32-bit, 3.3V and 5V PCI bus - Initial state and safe state settings via DIP switches - Built-in watchdog timer
96/48/24CH Opto-22 compatible TTL digital input/output
Features ■ Supports 32-bit, 5V PCI bus ■ 24/48/96 CH digital TTL/DTL input/output ■ Emulates 4/2/1 industry-standard 8255 PPI (Mode 0) ■ Supports Windows 7/8 X64/X86 and Windows 2008 R2 ■ Output port status feedback ■ Onboard 8254 timer/counter chip ■ Programmable interrupt source ■ (Direct interface with OPTO-22) Provides 12V and 5V power supply to OPTO-22
4CH IEEE1394.b Frame Grabber, PCI-E x4
Features - Compliant with PCI Express [x4] - High-speed image transfer rate: 800MB/s - Industrial screw-lock connector - Channel status LED - 4 isolated digital input/output - 4 isolated TTL level programmable trigger output pulses
8CH relay output 16CH isolated digital input
Features - PICMG 2.0 Revision 2.1 - 8-CH SPDT relay - Non-latching relay - Onboard relay drive circuit - Relay output state feedback - 16-CH, isolated DI - Onboard DI low-pass filter processing - 2 external interrupt sources
4-port RS-422/485 serial communication
Features - 32-bit CompactPCI, PICMG2.0 Rev2.1 - Plug and play, IRQ & I/O addresses are automatically assigned by PCI BIOS. - 4 asynchronous communication ports (intelligent buffer) - 4 RS-422/485 ports - 2500 VRMS isolation voltage - Supports multiple operating systems. - Surge protector - Rugged DB37 connector
2-port CAN interface
Features - PICMG 2.0 Rev 2.1 - Operation of two independent CAN networks - Programmable transfer speed up to 1 Mbps - CAN controller frequency 16 MHz - 2500 VRMS optical isolation - Direct memory mapping to the CAN controller - Powerful master interface for CAN bus protocol - Rear I/O available on cPCI-7841R
4/8CH 12Bit Simultaneous Sampling A/D Conversion DAQ Card
■Compliant with PXI 2.0 ■3U Eurocard form factor, compliant with CompactPCI ■12 bit A/D resolution ■Maximum simultaneous update rate of 1MS/s ■4-CH x analog output (PXI-2501) ■8-CH x analog output (PXI-2502) ■Hardware-based arbitrary waveform generation ■Onboard 8k-sample D/A FIFO (PXI-2501)
4CH 16Bit 1MS/s Analog Output & 16CH Isolated Digital Input & 16CH Isolated Digital Output
Features ■ 32-bit PCI bus (3.3V/5V) support ■ Hardware-based waveform generation ■ DNL less than 1 LSB ■ Trigger for digital waveform generation ■ 16-CH isolated digital input & 16-CH isolated digital output ■ 8-CH TTL DI and 8-CH TTL DO ■ 2-CH timer/counter, base clock: 40MHz ■ 4-CH PWM output ■ 3-CH encoder input supporting AB phase and CW/CCW ■ Supports synchronization of multiple cards via SSI bus (system synchronization interface)
8CH 24Bit Maximum 192KS/s Simultaneous Sampling Analog Input Module
Features ◾ 24-bit Sigma-Delta ADC ◾ 8CH simultaneous analog input ◾ Maximum sampling rate 192KS/s ◾ Input range ±1V - 10V ◾ Dynamic range 110dB ◾ Anti-aliasing filter ◾ Input coupling AC/DC (software selectable) ◾ IEPE - 4mA (software configurable)
2CH 14Bit Maximum 200MS/s Digitizer
Features ◾ Compliant with PXI Express Specification Revision 1.0 ◾ Supports 200 MS/s sampling rate and two simultaneous analog inputs with high-resolution 14-bit ADC ◾ Supports analog input up to 90 MHz bandwidth ◾ Equipped with 1 GB of storage memory ◾ Programmable input voltage ranges: ±0.2V, ±2V, ±10V ◾ Includes external digital trigger input/output terminals ◾ Full auto-calibration function included ◾ Supports signal averaging function
4CH 12Bit Maximum 80MS/s Digitizer
Features ◾ Maximum 80MS/s sampling and support for 4-channel simultaneous analog input ◾ High-resolution 12-bit ADC ◾ Analog input (maximum bandwidth 40MHz) with 1GB storage memory ◾ Input voltage range (programmable): ±0.5V, ±1V, ±5V, ±10V ◾ High-speed data streaming support via DMA data transfer scatter-gather ◾ Provides 10/20MHz digital onboard filter (FPGA) ◾ Provides PLL module for accurate synchronization
PCI-E[x4] 2CH GigE Vision PoE+ compatible frame grabber. Supports multiple cards and cameras in a single system.
Features - PCI Express [x4] - Supports 2 Gigabit Ethernet ports - IEEE802.3at PoE+ compliant - Compatible with multiple cards and cameras in a single system - Extended temperature support (0 to 70°C without frame drops) - PoE protection (overcurrent, overvoltage, automatic power supply adjustment) - User-friendly PoE power management utility and API
NVIDIA(R) Quadro(R) RTX8000 GPU equipped, PCI Express graphics card
【Features】 - Interface: PCIExpress 3.0[x16] - Display Output: 4x DisplayPort 1.4 digital video output (DP++) 1x USB Type-C 4x 4096x2160 @ 120 Hz 4x 5120x2880 @ 60 Hz 2x 7680x4320 @ 60 Hz - VirtualLink x1 - Audio output compatible DisplayPort - 3D stereo support - Compatible with Quadro Sync II - NVIDIA nView(R) desktop management software - HDCP 2.2 compliant - NVIDIA Mosaic
NVIDIA(R) Quadro(R) T1000 GPU equipped, mobile PCI Express graphics module
**Features** - Quadro(R) T1000 Embedded Graphics - 896 CUDA(R) cores, 2.6 TFLOPS peak FP32 performance - Memory: 4GB GDDR6, 128-bit, bandwidth: up to 192GB/s - Interface: MXM 3.1, PCI Express Gen3 [x16] - Form factor: Standard MXM 3.1 Type-A (82 x 70 mm) - Display output: 4x DisplayPort 1.4a digital video output (4K @120Hz, 8K @60Hz) - Low power consumption: 50W TGP - 5 years of availability
NVIDIA(R) Quadro(R) RTX3000 GPU equipped, mobile PCI Express graphics module
**Features** - Quadro(R) RTX3000 Embedded Graphics - 1920 CUDA(R) cores, 30 RT cores, 240 Tensor cores - 5.3 TFLOPS peak FP32 performance - Memory: 6GB GDDR6, 192-bit, bandwidth: up to 336GB/second - Interface: MXM 3.1, PCI Express Gen3 [x16] - Form factor: Standard MXM 3.1 Type-B (82 x 105 mm) - Display output: 4x DisplayPort 1.4b digital video output (4K @120Hz, 8K @60Hz) - Low power consumption: 80W TGP - 5 years of availability
