coating(frp) - List of Manufacturers, Suppliers, Companies and Products

[Release Agent Example] Cleaning of molded products is unnecessary, enabling continuous release.

FloroSurf FG-5093 forms a dry release film on the mold surface. Release properties are improved, and cleaning of the molded products is unnecessary.

"FloroSurf FG-5093" is a mold release agent that dissolves a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It has outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Additionally, the release agent components do not adhere to the molded products, eliminating the need for cleaning. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modifications ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

On-site construction fluorine-based release agent - No need to clean the work! FluoroSurf

Please try this when regular release agents do not work well. Outstanding continuous release properties. Easy to apply with a brush or spray. Dries at room temperature in 5 minutes after application.

The "Fluoro Surf FG-5093/5095 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molded resin to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for external processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce streaking. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Release Agent Example] Fluorine treatment on mold surface in-house (easy application + room temperature drying)

It is easy to perform release agent treatment that surpasses in-house baked fluororesin processing. Significant reduction in processing costs and delivery times!

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it to the mold with a brush or spray and allowing it to dry at room temperature for about 10 minutes, the adhesion of the molding resin to the surface is reduced, demonstrating excellent release properties. It is particularly effective in situations where conventional release agents do not work well. The film is at the nanometer level, allowing for accurate reproduction even on complex and precise surface shapes. It has excellent durability, with a proven track record of continuous release for thousands of shots, and reapplication with a brush or spray can restore its performance. Since the release agent components do not adhere to the molded products, cleaning is unnecessary. 【Features】 ■ Strongly adheres in reaction to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment and easy management *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine-based release agent that can be applied on-site: Fluorosurf FG-5093

Please try this when regular release agents do not work well. It offers overwhelming continuous release properties. Easy to apply with a brush or spray. Dries at room temperature in 5 minutes after application.

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. Just one application provides a non-stick surface to the mold. It reduces the adhesion of the molded resin to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability, with proven continuous release performance over thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, allowing for continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes, eliminating the need for external processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce surface defects. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent for transparent resin: "No cloudiness on the product!" "Continuous release is possible."

A dry release film is formed on the surface of the mold. Continuous release is possible, and there is no cloudiness on the resin. Since it is dry, the release agent components do not transfer, so cleaning of the workpiece is unnecessary.

The "Fluoro Surf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, ensuring that molded products remain clean and do not require washing. It is the only release agent that does not cause cloudiness when molding transparent resins. With a thin film at the nanometer level, it demonstrates excellent release properties even for complex and precise shapes, maintaining accurate surface precision. It has high release properties and excellent durability, with a proven track record of continuous release over thousands of shots. It is particularly effective in situations where conventional release agents fail. 【Features】 ■ The release agent components react with the mold material to adhere strongly, allowing for continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. ■ It can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing. ■ No removal of the film is required during mold reworking. ■ There is no transfer of release agent components, and cleaning of molded products is unnecessary. ■ When performance degrades, reapplication is as simple as top-coating! No need to remove the old film. ■ It has low odor and is non-flammable, helping to maintain a good working environment. ■ It does not use PFAS regulated substances (such as PFOS, PFOA, PFHxS, etc.).

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Please try the following for moldability: "Continuous molding possible" "Dry non-transfer"

Overwhelming continuous release properties. Easy to apply with a brush or spray. Dries at room temperature in just 5 minutes after application. The film thickness is only a few nanometers, and cleaning of the molded product is unnecessary. Sample available.

"FluoroSurf" and "Mold-Free" provide excellent non-stick release properties to metal surfaces when applied. PFAS regulated substances (such as PFOS, PFOA) are not used. Please try it when conventional release agents do not work. 【Features】 ■ The fluoropolymer film reacts with the mold material to adhere strongly, enabling continuous release even when conventional release agents fail. ■ With a film thickness of just a few nanometers, it can faithfully reproduce surface shapes at the nano and sub-micron level. ■ FluoroSurf can be easily applied with brushes or spray guns, while Mold-Free can be applied with an aerosol. Application is completed in just 10 minutes at room temperature, eliminating the need for external processing like baked fluoropolymer. ■ There is no accumulation of dirt on the mold, and no transfer of components to the workpiece, eliminating the need for cleaning processes. (Excluding Mold-Free MF-02S) ■ It is also effective in improving resin flow. ■ It is non-flammable, thus not classified as hazardous under fire laws. (Excluding Mold-Free) It has low odor. A water-based model is also available for VOC countermeasures. ■ There is no need to remove the film during mold reworking. ■ It is effective in reducing surface defects in extrusion molding and addressing melt fracture issues.

Company：フロロテクノロジー
Price：Other

Other molds
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance release agent for epoxy resin, excellent release properties.

Overwhelming continuous release properties in epoxy resin molding. Easy application with a brush or spray. Dries at room temperature in 5 minutes after application. No cleaning of molded items required. Samples available.

"FluoroSurf" and "Mold Free" provide excellent non-stick release performance to metal surfaces when applied. Outstanding release properties even with difficult epoxy resins! Please try it when conventional release agents fail. PFAS regulatory substances are not used. 【Features】 ■ The fluoropolymer film reacts with the mold material and adheres strongly, allowing continuous release even when conventional release agents fail. ■ The film thickness is just a few nanometers, faithfully reproducing surface shapes at the nano and submicron level. ■ Application is completed in just 10 minutes at room temperature. No external processing like baked fluoropolymer is required. ■ There is no accumulation of dirt on the mold, and no transfer of release agent components to the workpiece, eliminating the need for cleaning processes. ■ No cloudiness occurs during transparent resin molding. ■ Non-flammable, thus not classified as hazardous materials under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC countermeasures. ■ No removal of the film is required during mold reworking. ■ It is effective in reducing defects like "melting" and "sharkskin" in extrusion molding.

Company：フロロテクノロジー
Price：Other

Other molds
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine-based release agent that can be applied on-site: Fluorosurf FG-5093.

Please try this when regular release agents do not work well. It offers overwhelming continuous release properties. Easy to apply with a brush or spray. Dries at room temperature in 5 minutes after application.

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. After application, a non-stick property is imparted to the mold surface within 5 minutes of air drying at room temperature. The adhesion of the molded resin to the mold is reduced, demonstrating excellent continuous release even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with a brush or spray gun, with a 10-minute air drying time at room temperature. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce flash. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent Continuous release is possible Fluorine surface processing of molds in our own manufacturing facility

Please try this when conventional release agents do not work well. It offers overwhelming continuous release properties. Easy to apply, dries at room temperature in 5 minutes on the molding site. No need to clean the molded products.

The "FloroSurf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. It does not contain PFAS regulated substances (such as PFOS and PFOA). Just one application provides a non-stick surface to the mold. It demonstrates excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nanoimprinting. ■ Easily applied with a brush or spray gun, drying at room temperature in 10 minutes. No need for external processing. ■ No need to remove the film during reapplication. ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095). ■ Low odor and non-flammable, maintaining a good environment on-site (excluding aerosol types). ■ Applying it to the nozzle of extrusion molds reduces defects like blushing and melt fracture. Free samples are available for trial (limited to corporate clients)!

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agents [for rubber molding] continuous release and quality improvement

Solving the challenges of rubber molding sites! Improving productivity with overwhelming release properties.

In the rubber molding industry, there is a demand for both product quality and productivity. Particularly in complex shapes and precision products, molding defects can occur due to release agent issues, potentially leading to reduced yield. Additionally, transfer of the release agent and adhesion to molds not only compromises product quality but also increases cleaning processes. Our water-soluble release agent addresses these challenges and supports the balance between productivity and quality. 【Usage Scenarios】 - Release of rubber molded products - Application to molds - Extrusion molding 【Benefits of Implementation】 - Improved continuous release properties - Reduction of molding defects - Decrease in cleaning processes - VOC-free, reducing environmental impact

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent for electronic components

Ideal for precision molding! Continuous release, non-silicone, air-dry in 5 minutes at room temperature.

In the electronic components industry, precision molding requires the faithful reproduction of intricate mold shapes to efficiently produce high-quality products. Particularly in the molding of complex shapes and fine parts, the quality of release properties significantly affects production efficiency and product quality. Traditional release agents have led to issues such as poor release, transfer problems, and increased cleaning efforts, which can decrease productivity. Our water-soluble release agent addresses these challenges and contributes to improved productivity. 【Application Scenarios】 - Precision molding molds - Nanoimprinting - Extrusion molding (mouthpieces) 【Benefits of Implementation】 - Improved continuous release properties - Enhanced quality of molded products - Reduction in cleaning processes - Improved working environment

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent for automotive resin parts

Reduce molding defects of resin and rubber parts! Improve productivity with continuous release.

In the automotive industry, mass production of high-quality parts is required. Particularly for parts with complex shapes and designs, defects in mold release during the forming process are a significant factor that reduces production efficiency. Mold release defects can lead to damage to parts and aesthetic issues, potentially resulting in increased costs. Our water-soluble release agent addresses these challenges with its overwhelming continuous release capability. 【Application Scenarios】 - Forming of interior parts such as dashboards, door trims, and console boxes - Forming of parts with complex shapes or high design aesthetics - Compatibility with various resin materials such as urethane, ABS resin, and PP resin 【Benefits of Implementation】 - Improved yield due to reduced mold release defects - Reduced frequency of mold maintenance - Cost savings through increased productivity - Stable supply of high-quality interior parts

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance release agent for recycled plastics, excellent release properties.

Overwhelming release properties even with recycled plastic. Easy to apply with a brush or spray. Dries at room temperature in 5 minutes after application. No cleaning of molded products required. Samples available.

"FluoroSurf" and "Mold Free" provide excellent non-stick release properties to metal surfaces when applied. Outstanding release properties even with difficult recycled plastics! Please try it when conventional release agents fail. PFAS-regulated substances are not used. 【Features】 ■ The fluoropolymer film reacts with the mold material and adheres strongly, allowing continuous release even when conventional release agents fail. ■ The film thickness is only a few nanometers, faithfully reproducing surface shapes at the nano and sub-micron level. ■ FluoroSurf can be applied with brushes or spray guns, while Mold Free can be applied directly from an aerosol can. The application is completed in just 10 minutes at room temperature, eliminating the need for external processing like baked fluoropolymer. ■ There is no accumulation of dirt on the mold, nor transfer to the workpiece, eliminating the need for cleaning processes. (Excluding Mold Free MF-02S) ■ There is no transfer of release agent components, so cleaning of molded products is unnecessary. ■ It is non-flammable, thus not classified as a hazardous material under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC countermeasures. ■ There is no need to remove the film during mold reworking. ■ It is effective in reducing surface defects in extrusion molding.

Company：フロロテクノロジー
Price：Other

Other molds
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent for automotive resin parts - transparent resin without cloudiness.

Reduce molding defects of resin and rubber parts! Improve productivity with continuous release.

In the automotive industry, mass production of high-quality parts is required. Particularly for parts with complex shapes and designs, issues with mold release can significantly reduce production efficiency. Mold release problems can lead to damage to parts and defects in appearance, potentially resulting in increased costs. Our water-soluble release agent addresses these challenges with its overwhelming continuous release properties. 【Application Scenarios】 - Molding of interior parts such as dashboards, door trims, and console boxes - Molding of parts with complex shapes or high design quality - Compatibility with various resin materials such as urethane, ABS resin, and PP resin 【Benefits of Implementation】 - Improved yield through reduced mold release issues - Decreased frequency of mold maintenance - Cost reduction through increased productivity - Stable supply of high-quality interior parts

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent for transparent resin - transparent resin without cloudiness - non-transferable upon drying.

Reduce molding defects of resin, rubber, and transparent parts! Improve productivity with continuous release.

Our water-soluble release agent solves issues such as poor release performance through its overwhelming continuous release capability. Additionally, it contributes to improved productivity by minimizing cloudiness of the workpiece during the molding of transparent resins such as polycarbonate. Furthermore, the thickness of the release agent film is at the nanometer level, allowing for faithful reproduction of the mold's surface precision. Being water-based, it does not generate VOCs and poses no fire hazards, making it easy to manage and environmentally friendly. Moreover, although it is a fluorine-based release agent, it does not contain regulated substances such as PFOA, PFOS, or PFHxS. 【Application Scenarios】 - Molding of transparent components such as lens parts - Molding of interior parts like dashboards, door trims, and console boxes - Molding of complex-shaped parts or parts with high design aesthetics - Compatibility with various resin materials such as urethane, ABS, and PP 【Benefits of Implementation】 - Improved yield due to reduced release failures and workpiece cloudiness - Reduced frequency of mold maintenance - Cost reduction through increased productivity - Stable supply of high-quality interior parts

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

coating(frp) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

coating Product List

[Release Agent Example] Cleaning of molded products is unnecessary, enabling continuous release.

On-site construction fluorine-based release agent - No need to clean the work! FluoroSurf

[Release Agent Example] Fluorine treatment on mold surface in-house (easy application + room temperature drying)

Fluorine-based release agent that can be applied on-site: Fluorosurf FG-5093

Release agent for transparent resin: "No cloudiness on the product!" "Continuous release is possible."

Please try the following for moldability: "Continuous molding possible" "Dry non-transfer"

High-performance release agent for epoxy resin, excellent release properties.

Fluorine-based release agent that can be applied on-site: Fluorosurf FG-5093.

Release agent Continuous release is possible Fluorine surface processing of molds in our own manufacturing facility

Water-soluble release agents [for rubber molding] continuous release and quality improvement

Water-soluble release agent for electronic components

Water-soluble release agent for automotive resin parts

High-performance release agent for recycled plastics, excellent release properties.

Water-soluble release agent for automotive resin parts - transparent resin without cloudiness.

Water-soluble release agent for transparent resin - transparent resin without cloudiness - non-transferable upon drying.

Search Keywords Related to coating