compass Product List and Ranking from 13 Manufacturers, Suppliers and Companies

Spring Compass

Highly praised for its meticulous finish! Hard stainless steel spring compass.

The "Spring Compass" is a product of HARP Co., Ltd., which manufactures and imports/export jewelry and accessory making tools, machines, and supplies. It is made of hard stainless steel and has a size of 75mm. It has received positive feedback for its careful finishing. [Features] - Made of hard stainless steel - 75mm *For more details, please refer to the PDF document or feel free to contact us.

• Company：ハープ
• Price：Other

• Other work tools
• others

Tilt Compensation Magnetic Compass "CMPS11"

Equipped with a 3-axis magnetometer, 3-axis gyro, and 3-axis accelerometer! Capable of calculating the target's operational status.

The CMPS11 is a third-generation tilt-compensated magnetic compass. It is equipped with a 3-axis magnetometer, 3-axis gyro, and 3-axis accelerometer. By using the outputs from the three sensors that measure the x, y, and z components of the magnetic field along with pitch and roll data, it is possible to calculate the operational state of the target, and each of these components also supports raw data output. The CMPS11 module requires a power supply of 3.6-5V and a nominal current of 25mA. 【Features (excerpt)】 ■ Voltage: 3.6V to 5V ■ Current: 35mA Typ ■ Resolution: 0.1 degrees ■ Accuracy: Over 2% after calibration ■ Weight: 10g ■ Size: 24.5x18.5x4.5mm (0.96x0.73x0.18 inches) *For more details, please refer to the external link page or feel free to contact us.

• Company：ソリトンウェーブ
• Price：Other

• Sensors
• others

Inclination Compensation Compass "LSM303 Breakout Board"

Providing the necessary data to calculate tilt correction output! For position detection and free fall detection, etc.

The "LSM303 Breakout Board" is an inclination-compensated compass that uses the LSM303DLH to supply data necessary for calculating tilt-compensated output to a microcontroller. The LSM303DLH is a 3-axis accelerometer combined with a 3-axis magnetic sensor. 【Specifications (excerpt)】 ■ Power supply: 3.6–8V DC ■ Chip: LSM303DLH ■ Magnetic field full scale ±1.3 to ±8.1 Gauss ■ 6D direction detection ■ Dimensions: 20.5mm x 20.5mm (0.8 x 0.8 '') ■ Weight: 1g *For more details, please refer to the external link page or feel free to contact us.

• Company：ソリトンウェーブ
• Price：Other

• Sensors
• others

Daihang Instrument Manufacturing Co., Ltd. Compass Product Catalog

A lineup of lower lighting sunlights with a frame and modified compasses, etc.!

This catalog introduces the compasses handled by Daiko Instrument Manufacturing Co., Ltd. It features a lineup including the Sunstar boxed compass, wooden box formal compasses, and reflective magnetic compasses. Please make use of this for selecting products. 【Featured Products (Partial)】 ■ Sunstar boxed compass ■ Wooden box formal compass ■ Sunlight boxed model with bottom lighting (boxed) ■ Sunlight bottom lighting model (with stand) ■ Formal compass *For more details, please refer to the PDF materials or feel free to contact us.

• Company：大航計器製作所
• Price：Other

• others

Cutting circles is super easy! 【Punch Compass】

From ordinary paper to thick paper! You can easily cut out circles!

This product is an interesting compass that allows you to easily and accurately cut circles ranging from 1.5mm to 10cm in diameter. It can also cut through thick paper, and by rotating it a few times from both the front and back, you can achieve a clean cut. The blade tip is replaceable. You can use commercially available replacement blades of type "A" (blade width: 9mm). It is particularly useful in the model-making industry. If you find it difficult or cumbersome to create small circles, this product will solve that problem.

• Company：DRAPAS Inc. Tokyo main office, Osaka sales office
• Price：Less than 10,000 yen

• Other measurement, recording and measuring instruments
• Office supplies and stationery

筆記具を挟んで使うコンパス【マルチコンパス】

挟む筆記具によって変幻自在な面白いコンパス

• Company：DRAPAS Inc. Tokyo main office, Osaka sales office
• Price：Less than 10,000 yen

• Other measurement, recording and measuring instruments
• Office supplies and stationery

Specialized small spring compass

A compass specialized for stably drawing small circles.

The smallest type of small spring compass is particularly suitable for drawing small circles. Each is a specialized tool for its specific use and cannot be interchanged.

• Company：DRAPAS Inc. Tokyo main office, Osaka sales office
• Price：Less than 10,000 yen

• Other measurement, recording and measuring instruments
• Office supplies and stationery

Single-type replacement medium-sized spring compass (SS・SSL) with small tip.

Can be used for various purposes with interchangeable parts.

Since it is a replaceable type, it can be used as a pencil compass, a caliper compass, and a divider with just one piece. You can also use the separately sold compass sharpener and circle cutter.

• Company：DRAPAS Inc. Tokyo main office, Osaka sales office
• Price：Less than 10,000 yen

• Other measurement, recording and measuring instruments
• Office supplies and stationery

Special Drop Compass for Replacement (for drawing radius up to 15mm)

A drop compass specialized for extremely small circles with interchangeable parts.

This is a compass specifically designed for very small circles. Since it has interchangeable parts, you can switch between using a pencil and a scriber. While a regular compass adjusts the radius by opening and closing both legs, a drop compass is used as follows: 1) Place the needle on the center axis onto the paper and hold it down with your index finger to fix the center. 2) Adjust the radius. 3) Rotate the drawing part (pencil or scriber) attached to the outer axis with your thumb and middle finger to draw the circle. It can draw circles with a radius of up to 15mm.

• Company：DRAPAS Inc. Tokyo main office, Osaka sales office
• Price：Less than 10,000 yen

• Other measurement, recording and measuring instruments
• Office supplies and stationery

Specialized Tailoring Compass (Adjustable Legs)

Adjustable leg sewing compass

It is made of pure brass, and the central device features a metal gear design. When both legs are fully extended, it can draw a circle with a radius of 330mm. The finish is similar to other compasses, with tin-cobalt plating and a hairline texture.

• Company：DRAPAS Inc. Tokyo main office, Osaka sales office
• Price：Less than 10,000 yen

• Other measurement, recording and measuring instruments
• Office supplies and stationery

Single-type replacement large spring compass (OSSN) small tip

A large compass designed for speed.

The middle wheel uses a special screw (Sanjo screw), allowing for quick opening and closing by holding both legs without rotating the middle wheel. Since the needle diameter is 2.0mmφ, you can differentiate between using a pencil and a dual needle, and furthermore, if you use a relay, it is also possible to draw a large circle with a radius of 250mm. The diameter of the joint is 〈3.5mmφ〉, which is common with our other compasses. You can use the compass sharp 〈3.5mmφ small〉 (with "4 types" ranging from 0.3 to 0.9mm).

• Company：DRAPAS Inc. Tokyo main office, Osaka sales office
• Price：Less than 10,000 yen

• Other measurement, recording and measuring instruments
• Office supplies and stationery

Single-type replacement sharp compass (TOS・KS・SS) small tip

A replaceable compass that integrates a mechanical pencil and a compass.

The mechanical pencil and compass are integrated, so there is no need to sharpen the lead, allowing for quick drafting. Since it is interchangeable, you can replace it with a compass sharpener of different line widths.

• Company：DRAPAS Inc. Tokyo main office, Osaka sales office
• Price：Less than 10,000 yen

• Other measurement, recording and measuring instruments
• Office supplies and stationery

British-style adjustable pointer compass

Interchangeable needle compass

*Drawing radius: 150mm, when used as a relay: 230mm

• Company：DRAPAS Inc. Tokyo main office, Osaka sales office
• Price：10,000 yen-100,000 yen

• Other measurement, recording and measuring instruments
• Office supplies and stationery

英式 引針式スプリングコンパス（中車式）

• Company：DRAPAS Inc. Tokyo main office, Osaka sales office
• Price：Less than 10,000 yen

• Other measurement, recording and measuring instruments
• Office supplies and stationery

Single-type slide sharp compass (TRK・KRK) small tip

A sharp compass specialized for ease of handling.

This is an easy-to-use compass with a built-in sliding compass that has a compass sharpener set in it. [Drafting Radius] TRK: 180 to 225 mm KRK: 120 to 145 mm

• Company：DRAPAS Inc. Tokyo main office, Osaka sales office
• Price：Less than 10,000 yen

• Other measurement, recording and measuring instruments
• Office supplies and stationery