1～14 item / All 14 items
Burkert's LFC (Liquid Flow Controller) measures and controls liquid flow rates from 15 to 600 ml/min.
Burkert's LFC (Liquid Flow Controller) measures and controls liquid flow rates from 15 to 600 ml/min. Compared to liquid mass flow controllers available on the market, it allows for the control of larger flow rates.
In addition to the high-speed response performance and high range availability of conventional models, it also supports CANopen!
● MFC compatible with CANOpen ● High response speed (fastest within 0.3 seconds, within 0.5 seconds for some models) ● A wide range of lineup supporting flow rates from 10 [ml/min] to 1500 [l/min] ● Protection rating IP65
Control small to large flow rates with a single unit! Capable of handling micro to high differential pressures (10kPa to 1.0MPa)! A German-made MFC for the IoT era that also enables cost reduction.
The German manufacturing industry is gaining attention with Industry 4.0. Here’s a proposal for a mass flow controller from Bürkert, a long-established German fluid control equipment manufacturer, designed for the IoT era! 【One device, multiple roles!】 ● Capable of controlling flow rates from low to high (for example, 20 to 1500 Nl/min (N2)) with a single unit ● Smooth control even at a low differential pressure of 10 kPa thanks to the inline sensor ● Smooth control even at a high differential pressure of 1.0 MPa (10 bar) ● Complete shut-off achieved with resin seals and shut-off functionality ● Fast response to set points with stability (within 0.3 to 0.5 seconds) ● The latest models can handle maximum flow rates of up to 2500 L/min! 【Easy to implement & ready for immediate use!】 ● Shipped calibrated, so no setup or adjustment is needed for immediate use ● No dedicated power supply required (operates on DC 24V) for easy installation 【Unique to Bürkert & IoT generation】 ● Flexible support for communication methods such as OpenCAN, fieldbus, RS485, in addition to analog input/output signals ● Models with protection rating IP65 are also available ● Proposals focused on maintenance ease and space-saving designs are also possible!
High-speed response within 0.3 seconds! For devices with frequent changes in set flow rate! Wide pressure range support (0.01 to 1.0 MPa).
Industrial mass flow controllers by Bürkert! These mass flow controllers boast various specifications that set them apart from competitors, designed for industries requiring diverse specifications, unlike those for the semiconductor industry. In addition to response speed: 【Bürkert's industrial mass flow controllers feature】 ● High pressure compatibility → Up to 1.0 MPa ● Minimum required differential pressure → 10 kPa is sufficient ● High flow rate → Capable of controlling 2500 Nl/min (equivalent to nitrogen) with a single unit ● Warm-up operation → Ready in 1 minute ● Tight shut-off capability → Reduces costs and space for solenoid valves 【Additionally, as IoT generation mass flow controllers】 ● Compatible with various communication standards EtherCAT, EtherNet/IP, Modbus/TCP, PROFINET
Mass flow controller (MFC) compatible with a wide range of operating pressures. It enables high-speed response within 0.3 seconds. It can also control large flow rates!
Industrial mass flow controllers by Bürkert! These mass flow controllers boast various specifications tailored to different industries, setting them apart from competitors with unique features. Beyond pressure range, Bürkert's industrial mass flow controllers offer: ● Rangeability → High precision of 1:100 ● High flow rate → Capable of controlling 2500 Nl/min (equivalent to nitrogen) with a single unit ● Warm-up operation → Ready in 1 minute ● Tight shut-off capability → Reduces costs and space for solenoid valves Additionally, as IoT generation mass flow controllers, they support various communication standards: EtherCAT, EtherNet/IP, Modbus/TCP, PROFINET.
High-flow, high-pressure mass flow controllers (MFC) that contribute to increasing the throughput of devices and processes.
Mass flow controllers for high flow and high pressure specifications are Bürkert! While many mass flow controllers in the industry have somewhat standardized specifications, we have learned through recent activities that customers have various requests such as "I want to achieve higher flow rates" and "I want to flow without reducing pressure." [Bürkert's industrial mass flow features] ● High flow → Capable of controlling up to 2500 Nl/min (equivalent to nitrogen) with a single unit ● High pressure specifications → Supports up to 1.0 MPa Additionally, ● Low differential pressure specifications → Supports from 5 kPa ● Tight shut-off capability → Reduces costs and space for separate solenoid valves ● Response speed → From 300 msec ● Warm-up time → 1 min [Furthermore, as an IoT generation mass flow] ● Supports various communication standards Compatible with various communications such as EtherCAT, EtherNet/IP, Modbus/TCP, PROFINET, etc.
Would you like to automate batch control (quantitative control)?
Burkert's batch controller is a product that can be easily automated with just a flow meter and a valve, without the need for special electrical knowledge. Batch control (quantitative control) is a control method where a specific batch amount (quantity) is set, for example, "100 liters," and that amount is dispensed. For example: - I want to add "500L" of water to cement. - In bread production, I want to add "30L" of water to the flour. - To dilute alcohol by a factor of ten, first, put "10L" of alcohol in one tank, and then add "90L" of water in another tank. These are some of the applications you can use it for.
Equipped with a regulator, it enables easy and inexpensive local control through connection with sensors.
The proportional solenoid valve allows for multi-stage control based on arbitrary opening settings. This enables simultaneous upgrades and miniaturization of devices. Our proportional solenoid valves possess high rangeability, accuracy, hysteresis, and linearity. For example, there are many cases where the same model of proportional solenoid valve can be used for two devices with different required flow rates. Additionally, by using a proportional solenoid valve and flow sensor separately in areas currently using mass flow controllers, significant cost reductions can be achieved. Furthermore, using the controller Type 8611 equipped with a pressure gauge allows for easy local control of pressure loops, flow loops, and more. Particularly in the element development stage, the aforementioned simple loops enable verification of the usefulness and operation of the proportional solenoid valve without the need to create a foundation.
Burkert's mass flow controllers can easily control small to large flow rates with a single unit! They also support a wide range of differential pressures from low to high (10 kPa to 1.0 MPa)!
Flow control of gases is best achieved with a mass flow controller (MFC)! The German manufacturing industry, which is gaining attention in Industry 4.0, presents a proposal for an "easy-to-use" mass flow controller (MFC) from Bürkert, a long-established fluid control equipment manufacturer in Germany, designed for the IoT era! ● Calibrated according to your usage conditions and shipped, so it can be used immediately after delivery! ● No dedicated power supply is required (starts with DC24V), making it easy to install. ● Capable of controlling flow rates from small to large (for example, up to 2500Nl/min (N2) with a single unit). ● Smooth control even at a low differential pressure of 10kPa thanks to the inline sensor. ● Smooth control even at a high differential pressure of 1.0 MPa (10bar). ● Complete shut-off achieved with resin seals and shut-off functionality. ● Fast response to set points, stabilizing within 0.3 to 0.5 seconds. 【Unique to Bürkert & IoT Generation】 ● Flexible support for communication methods such as OpenCAN, fieldbus, RS485, in addition to analog input and output signals. ● Models with protection rating IP65 are also available. ● Proposals focused on maintainability and space-saving designs are also possible!
Burkert's Coriolis MFC measures and controls liquid flow rates from 10 to 280 g/min. It also has high accuracy as a flow meter.
Burkert's Coriolis MFC (Mass Flow Controller) measures and controls liquid flow rates from 10 to 280 g/min. Compared to other mass flow controllers for liquids on the market, it allows for the control of larger flow rates. Features: High-precision and stable flow measurement and control device. The Type 8756 is an ideal mass flow controller/flow meter for applications requiring precise measurement of small liquid flow rates and high-precision control. Utilizing sensor technology based on the Coriolis principle, it enables accurate measurements regardless of the type of fluid and is unaffected by variations in pressure or temperature. Characteristics: Wide measurement range and high precision: ±0.2% reading accuracy. Long-term stability: Provides stable performance without the need for zero-point adjustment. Multifunctional measurement: Simultaneously measures flow rate, density, and temperature. High corrosion resistance: Uses stainless steel 316L or Alloy C22 for wetted parts. Modular structure: Options available for models that integrate proportional valves or micro gear pumps.
The liquid MFC (mass flow controller) based on Burkert's Coriolis measurement principle can measure and control liquid flow rates from 10 to 280 g/min.
Burkert's Coriolis MFC (Mass Flow Controller for liquids) measures and controls liquid flow rates from 10 to 280 g/min. Compared to liquid mass flow controllers available on the market, it allows for the control of larger flow rates.
For wide-range liquid flow controllers/flow meters, choose Bürkert.
Burkert's liquid flow controller can accommodate requests such as, "I want to achieve a higher flow rate in the next model" and "I need a flow controller that can handle corrosive fluids other than water." It is a unique liquid flow controller developed based on the experience gained from applications involving hydrogen peroxide. **Features of Burkert's Liquid Flow Controller:** - High flow rate: Capable of controlling up to 600 ml/min (equivalent to water) with a single unit - Fluid specifications: Compatible with corrosive fluids such as ammonia, methanol, and hydrogen peroxide - Pressure specifications: Supports up to 0.6 MPa - Response speed: Up to 500 msec - Tight shut-off capability: Reduces costs and space for separate solenoid valves - No need for separate installation of check valves: Internal adjustment valve includes check function **Digital Communication Compatibility:** Supports various communications such as EtherNet/IP, EtherCAT, Modbus/TCP, and PROFINET. *For more details, please contact us or view the PDF download.*
![Burkert Laboratory Catalog [Compressed Version]](https://image.mono.ipros.com/public/default/object/noimage_l.gif?w=280&h=280)
We can further miniaturize and optimize laboratory equipment/research equipment.
This document describes how each of Bürkert's products can be utilized in laboratory equipment and other applications. We hope it will be of some assistance in improving your design and manufacturing processes. Due to the file size limitations of Ipros (with a maximum file size limit of 2MB), this document is in a compressed format (distributed as a single sheet printed with two pages). If you would like an uncompressed version, please contact Bürkert.
Easy automation of precise filling of preparation water and similar substances.
Burkert's batch controller achieves quantitative measurement functionality and open/close support for solenoid valves in a compact body. Automation of quantitative filling can be realized without the need for control panels or complex wiring work. 【Features】 - Achieves quantitative measurement and open/close instructions for valves in a compact size - Wall-mounted controller option available For more details, please contact us or download the catalog.
