1～15 item / All 17 items
Ideal for line sensor illumination, DC24V type.
The IWDV_24 series is a high-performance Constant Voltage Controller that supports large lighting systems with a DC 24V drive and a power consumption of 300W. By setting the output lower voltage, you can select an optimal dimming range according to the lighting, and external dimming control can be switched between Ethernet and parallel communication.
Voltage controller with external 0-5V control function; compact design allows for external ON/OFF control and output control.
Constant voltage controller with external 0-5V control function. The IMAR series, IDHM series, IFVA series, and IFHA series are variable constant voltage output controllers that can be easily connected and operated. Equipped with external ON/OFF and external 0-5V control functions.
Simple Analog Output Control Controller Compact 30W (IDPA-30M2)
Dimming from 0 to 100% is possible with PWM control at approximately 80 kHz. It comes standard with an external ON/OFF control terminal. It supports an input voltage of AC 100 to 240V. *The standard included power cable is for AC 100V.
Constant current controller capable of lighting a wide range of lighting.
Constant current dimming controller compatible with various external interfaces, capable of lighting a wide range of lighting options. The IHV series, IBF series, IHVA-SP series, and IHV-FX series can be connected, and other small DC 12V driven lights can be connected to each CHDC 12V output connector. External control can be selected according to the usage environment from analog 0-5V, 8-bit parallel, RS-232C, and LAN communication. By setting the maximum output current, lighting dedicated to each current control can be connected simultaneously. The maximum output current value can be set individually for each channel from 100 to 1,000 mA, allowing them to light up at the same time. The dimming range can be varied in 256 steps from 0 mA to the set maximum output current value. *Lighting with a rated power of 1.2W or less may not be usable due to potential errors caused by the automatic no-load detection function. Four types that can accommodate various external controls are available. External control options include 8-bit parallel, analog 0-5V, RS-232C, and Ethernet. You can choose external control that matches your network environment.
High-capacity controller ideal for line sensors and large surface lighting; can light up to 4 channels with slave connection.
The variable output voltage method makes it ideal for line sensor cameras and high-speed shutter cameras. There are variations that can connect lighting with a power consumption of 100W/300W/600W driven by DC24V, allowing for use with various types of lighting. External output control can be switched between LAN communication and parallel communication using a switch.
Compact overdrive power controller with a constant light output ratio of over 4 times at a maximum of 36V overdrive.
A lineup of 6 models ranging from 30W 2ch to 40W 8ch. Strobe lighting is possible from 2ch to 6ch with a 30W capacity. A compact overdrive power controller compared to the conventional SAG series power supply. The overdrive setting value (SAG value) can be set from 6V to 256 gradations. Output voltage can be controlled from 6V to the overdrive setting value (SAG value) in 256 gradations. There are 4 connection ports, allowing control from 4 computers. It can flow a large current instantaneously, up to about 4 times more than constant lighting. *Maximum load varies depending on the lighting. Please also consider the general-purpose SAG2 series, LAN communication type SAG-TP series, high-capacity SAG-HP series, and compact DC24V input ILS series.
Overdrive controller optimal for the operation of the ISS series.
The overdrive setting value (SAG value) can be set from 10V to 36V with 256 gradations. The output voltage can be controlled in 256 gradations from 10V to the overdrive setting value (SAG value). It features an internal control mode operated by a switch on the front panel and an external control mode via LAN communication. It has 4 connection ports, allowing output settings from up to 4 computers. The trigger mode can be selected from internal trigger mode (fixed at 100Hz) and external trigger mode. Overdrive effect: It can be connected to the ISS series lighting, allowing it to illuminate with brightness over 16 times that of constant light and more than 3 times that of conventional strobes.
Full lineup of versatile, highly multifunctional models.
Most standard LED lighting from Reimac can be triggered to flash by an external trigger signal. It supports emission times from 10μs to 990μs via external triggers. For high-speed imaging applications, it is easy to synchronize the timing of illumination with the camera's exposure. Due to the low heat generation of the LED elements, they have a longer lifespan and stable light output. It can momentarily allow a higher current than constant lighting, with a maximum usage of about four times. *Maximum load varies depending on the lighting. Please also consider the IJS series for small LAN and the ILS series for small DC 24V input.
Small DC 24V overdrive controller
Output voltage can be adjusted freely from a minimum of 10V to 36V. The compact body allows for easy storage within panels. The illumination time can be set in finer increments of 1μs compared to conventional products. The push-in connector requires no tools for easy connection.
Compact and low-cost digital Controller
The ILP series is a digital controller that achieves a compact size and low price, approximately 1/6 of the conventional size, which is the smallest in the industry for a 30W 2CH, by increasing the density of the implementation components and optimizing the design. It allows for 1000 levels of dimming with a highly visible digital display. Additionally, it comes standard with DIN rail mounting support, and optional panel mounting brackets and desktop stands are available, making it suitable for various applications.
The camera shutter can be controlled with the external trigger output function, making synchronization with LED lighting easy.
Introducing 5 key features! ● Optimization of shooting timing In addition to dimming and turning the lighting on/off, synchronized control of trigger output to the camera is possible. ● High expandability There is a high degree of freedom in selecting the basic unit, with options available in 4ch/8ch specifications and 12V/24V output specifications, totaling four types. By connecting expansion units, it is possible to expand in 4ch/8ch units even with mixed 12V/24V outputs, allowing for a maximum of 40ch expansion. The control method is primarily based on LAN communication, with the possibility of manual control and parallel communication expansion through unit connections. ● Programming function With a trigger 1ch input at the inspection timing, multiple controls on the inspection stage are possible. The standard programming function allows for not only control of the output sequence from LAN communication but also output control, light emission time, delay time, and pattern output, as well as control of external trigger output. ● Space-saving design Designed for incorporation into control panels with DIN rail mounting, achieving a compact and space-saving design with a minimum unit width of 25mm. ● Supported interface standards Compatible with GigE Vision and GenICam (Generic Interface for Cameras), offering high versatility and compatibility with various inspection software, making machine vision setup easy.
Compact, low-cost digital controller
Compact and low-cost digital PWM controller By increasing the density of the implemented components and optimizing the design, we have achieved a compact size that is approximately 1/6 of the conventional size, making it the smallest in the industry for 30W 2CH, with a standard price of 24,000 yen (ILP-30M2) / 36,000 yen (ILP-60M2-24). It features a highly visible digital display that allows for dimming with 1000 levels of gradation. The input voltage is DC24V, and the lineup includes the ILP-30M2 with an output voltage of DC12V and a total capacity of 30W, and the ILP-60M2-24 with an output voltage of DC24V and a total capacity of 60W.
Constant current controller with external 0-5V control function, compatible with IHV, IHVE, and IBF series for direct connection.
Compact, low-cost digital controller Constant current dimming controller that can be directly connected to the IHV series, IBF series, IHVA-SP series, and IHV-FX series without a resistor box. Includes external ON/OFF and external 0-5V control functions.
Small DC 24V input overdrive controller.
The minimum output voltage has been expanded from 12V to 6V for the SAG2 series power supply, allowing output control from lower light levels. The emission time can be set in finer increments of 1μs compared to conventional products. Tool-free and easy connection with push-in connectors.
Digital dimming controller capable of 256 levels of dimming. A lineup of 45 models with combinations of output capacity, external control methods, and more.
There are a total of 42 types of specifications that support an input voltage of AC100-240V, including two types of output voltage (DC12V, 24V), three types of controller output capacity (30W, 50W, 100W), three types of channel numbers (2CH, 4CH, 8CH), and three types of external control methods (TP, S2, PV). Additionally, there is a full lineup of 45 models for specifications that support an input voltage of DC24V, featuring an output voltage of DC24V, two types of controller output capacity (50W, 150W), three types of channel numbers (2CH, 4CH, 8CH), and three types of external control methods (LAN communication (TP)). You can select the optimal controller based on the combination of lighting you use and your environment.
