We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for controller.
ipros is IPROS GMS IPROS One of the largest technical database sites in Japan that collects information on.

controller×藤川伝導機 - List of Manufacturers, Suppliers, Companies and Products

controller Product List

1~15 item / All 29 items

Displayed results

Air Flow Controller "PFCQ Series"

Equipped with a built-in linear motor, it achieves a wide operating differential pressure range! The LED lamp allows for confirmation of operating status and error occurrence.

We would like to introduce our air flow controller, the 'PFCQ Series'. By incorporating a linear motor, the flow rate is adjusted by moving the valve body attached to the linear motor. When a flow rate command signal is input, the built-in calculation circuit compares the flow rate measured by the flow sensor, and based on that value, drives the linear motor to control the flow rate. 【Features】 ■ Flow control range: 9–300 L/min ■ Operating differential pressure range: 0.05–0.5 MPa ■ Time to reach set flow rate: 0.5 seconds or less ■ Control accuracy: ±3% F.S. ■ Non-grease ■ Lightweight: 800g *For more details, please refer to the PDF document or feel free to contact us.

  • フロー1.PNG
  • フロー2.PNG
  • controller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pilot check valve speed controller "ASP series"

We offer vertical/horizontal types that can be selected according to installation conditions! Improved piping flexibility (360° rotating type).

We would like to introduce the "ASP Series" speed controller with pilot check valve, handled by Fujikawa Denko Co., Ltd. You can choose between the "with residual pressure exhaust function," which allows for the construction of a safety circuit, and the "without residual pressure exhaust function," which enables temporary intermediate stops. Additionally, we offer vertical and horizontal types that can be selected according to installation conditions, and the piping is designed to rotate 360°. 【Features】 ■ With residual pressure exhaust function - Allows for the construction of a safety circuit ■ Without residual pressure exhaust function - Enables temporary intermediate stops *For more details, please refer to the PDF document or feel free to contact us.

  • 1.PNG
  • 2.PNG
  • 3.PNG
  • 4.PNG
  • 5.PNG
  • 6.PNG
  • 7.PNG
  • 8.PNG
  • 9.PNG
  • Other safety equipment
  • Ventilation and Exhaust

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Flow Controller "IN502-44/45"

Space-saving / Reduced piping / Reduced wiring / Reduced installation man-hours! Selection of grease and various control diagnostics are possible.

The "IN502-44/45" is an air flow controller capable of automatic flow adjustment. By utilizing a pressure sensor for flow conversion and a temperature sensor for temperature compensation of the flow, it enables measurement and output. Additionally, in the switch output "tolerance mode," it provides a switch output when the controlled flow falls within a specified tolerance range of the flow command value. 【Features】 ■ Automatic flow adjustment capability ■ Control accuracy: ±5% F.S. ■ Response time: less than 0.5s ■ Three-screen display ■ Space-saving / reduced piping / reduced wiring / reduced installation work *For more details, please refer to the PDF document or feel free to contact us.

  • 1.PNG
  • 2.PNG
  • 3.PNG
  • 4.PNG
  • 5.PNG
  • 6.PNG
  • 7.PNG
  • 8.PNG
  • 9.PNG
  • Flow Control
  • Pressure Control

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shock Absorber and Speed Controller Catalog

Safe and clean shock absorption technology! In addition to products, shock absorption theories are also included.

This catalog introduces the "Shock Absorber and Speed Controller" manufactured by Endine Co., Ltd. It includes the adjustable shock absorber "Compact Series ECO OEM/ECOLROEM" and the speed controller "Hydraulic Damper ADA500." Additionally, it contains safety precautions, a product quick reference table, and information on shock absorption theory, making it a useful resource for those considering implementation. We encourage you to read it. 【Contents】 ■ Introduction ■ Precautions ■ Introduction to Shock Absorbers ■ Adjustable Shock Absorbers ■ Fixed Shock Absorbers ■ Speed Controllers *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements
  • controller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Control, Switching, and Attachment Series

Compatible with various applications! Lineup of control controllers and valves.

We would like to introduce our "Control, Switching, and Disconnect Series" that we handle. The Control Series includes the "Chemifit C1 Speed Controller," which is suitable for environments requiring chemical resistance, and the "Compact Speed Controller," which is more compact compared to conventional sizes and features a push-one connection. Additionally, we offer the "Ball Valve" that allows for compact piping in the Switching Series, and the "Valve Embedded Connector," which opens and closes the valve inside the fitting by disconnecting and connecting the tube in the Disconnect Series. Please feel free to consult us when you need assistance. 【Product Lineup (Partial)】 ■ Control Series - Chemifit C1 Speed Controller - Compact Speed Controller - Speed Controller - Throttle Valve - Miniature Valve *For more details, please refer to the PDF document or feel free to contact us.

  • 6_2.PNG
  • 6_3.PNG
  • 6_4.PNG
  • 6_5.PNG
  • 6_6.PNG
  • 6_7.PNG
  • 6_8.PNG
  • 6_9.PNG
  • 6_10.PNG
  • valve

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water Flow Controller "FC3W Series"

The flow control accuracy is ±5% F.S., and the response time is less than 10 seconds! The fluid contact part is non-grease.

We would like to introduce our water flow controller, the 'FC3W Series'. It allows for stepless control of water flow in proportion to the electrical signal. Even if the upstream pressure changes, it is possible to maintain a constant flow rate for each line. Please feel free to contact us if you have any inquiries. 【Features】 ■ Stepless control of water flow in proportion to the electrical signal ■ Ability to maintain a constant flow rate for each line even if the upstream pressure changes *For more details, please refer to the PDF document or feel free to contact us.

  • controller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dual Speed Controller "ASD-A Series"

Simultaneous control of meter in and meter out is possible! Improved reproducibility of flow rate.

We would like to introduce the dual-speed controller 'ASD-A Series' with one-touch pipe fittings that we handle. It prevents the cylinder from popping out and allows for speed control of single-acting cylinders. Additionally, the handle color enables identification of meter in and meter out. Please feel free to contact us when you need assistance. 【Features】 ■ Lightweight ■ Reproducibility of flow rate *For more details, please download the PDF or feel free to contact us.

  • controller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Flow Controller "IN502-44/45"

Simultaneous measurement of secondary pressure values and fluid temperature is possible! Notification of reaching the flow command value for controlled flow.

The "IN502-44/45" is an air flow controller capable of automatic flow adjustment. By utilizing a pressure sensor for flow conversion (differential pressure type) and a temperature sensor for flow temperature compensation, it enables measurement and output. In "tolerance mode" for switch output, the switch will activate when the controlled flow falls within a specified tolerance range of the flow command value. 【Features】 ■ Control accuracy ±5% F.S. ■ Response time under 0.5s ■ Automatic control of set flow ■ Reduction of installation labor ■ Mitigation of the effects of load fluctuations *For more details, please download the PDF or feel free to contact us.

  • controller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Speed Controller "JAS-SML/SCL Series"

A scale window that allows numerical management of flow! Fine adjustments are possible due to improved resolution.

The "JAS-SML/SCL Series" is a speed controller equipped with a secondary scale on the top of the handle, allowing for fine adjustments in increments of 1/4. It reduces the height dimension by a maximum of 20.8mm and improves resolution for precise tuning. It features a scale window that allows for numerical management of flow rates. Please feel free to contact us when you need assistance. 【Features】 ■ Fine adjustments in increments of 1/4 are possible with the secondary scale display - 32 divisions (connection screw diameter: M3, M5, 10-32UNF) - 40 divisions (connection screw diameter: 1/8) ■ Reduces labor hours and setting errors *For more details, please download the PDF or feel free to contact us.

  • 目盛付スピードコントローラ『JAS-SMLSCL Series』2.JPG
  • 目盛付スピードコントローラ『JAS-SMLSCL Series』3.JPG
  • 目盛付スピードコントローラ『JAS-SMLSCL Series』4.JPG
  • 目盛付スピードコントローラ『JAS-SMLSCL Series』5.JPG
  • 目盛付スピードコントローラ『JAS-SMLSCL Series』6.JPG
  • controller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Speed Controller "AS-FSMA/FSCA Series"

Fine adjustments are possible due to the upward decomposition capability! Equipped with a scale window that allows numerical management of flow rate.

The "AS-FSMA/FSCA Series" is a compact scale-equipped speed controller that allows for inspection and maintenance work to be easily performed from a 360° perspective. It features a scale window that enables numerical management of flow rates. This product allows for fine adjustments due to improved resolution. Please feel free to contact us when you need assistance. 【Features】 ■ Fine settings possible with fractional display, allowing for adjustments every 1/4 - 32 divisions (Body size 1) - 40 divisions (Body size 2) ■ Reduces work hours and setting errors *For more details, please download the PDF or feel free to contact us.

  • controller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Small Scale Speed Controller 'AS-FSA Series'

Height dimension reduced by a maximum of 5.4mm! Equipped with a scale window that allows for numerical flow management.

The "AS-FSA Series" is a compact speed controller with a height dimension reduced by a maximum of 5.4mm and equipped with a scale. By attaching an identification plate, it allows for easy identification during multiple installations and direction of flow identification. It is equipped with a scale window that enables numerical management of flow rate. Please feel free to contact us when you need assistance. 【Features】 ■ Fine settings possible with 1/4 increments using the auxiliary scale display ・32 divisions (Body size 100) ・40 divisions (Body size 200) ■ Reduces work hours and setting errors *For more details, please download the PDF or feel free to contact us.

  • 小型目盛付スピードコントローラ『AS-FSA Series』2.JPG
  • controller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Position Controller / Functional Safety Unit 'SCON2/SU'

A controller with safety monitoring functions that safely controls a single-axis actuator!

The "SCON2/SU" is a controller that allows the use of single-axis actuators without safety fences and without the need to cut off the power source. It enables safe collaboration between humans and robots without stopping production. The "SCON2" controller can be connected to actuators equipped with 200V servo motors ranging from 60W to 750W. It has a built-in fan, allowing for installation with a spacing of just 1mm, effectively reducing the installation area in control panels. 【Features】 ■ Achieves functional safety with single-axis actuators ■ Can safely stop without cutting off the power source ■ Allows the use of single-axis actuators without fences ■ Equipped with 14 types of safety functions *For more details, please download the PDF or feel free to contact us.

  • 10a.PNG
  • 10b.PNG
  • 10c.PNG
  • 10d.PNG
  • 10f.PNG
  • 10g.PNG
  • 10h.PNG
  • 10i.PNG
  • Actuator
  • controller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mitsubishi Electric Servo System Controller Comprehensive Catalog

For advanced motion control, leverage the problem-solving power of the "servo system controller."

This catalog introduces the "Mitsubishi Electric Servo System Controller" that we handle. It includes motion controllers such as the "Q173/Q172DSCPU" for large and medium-sized systems, as well as the simple motion units "LD77MS16/MS4/MS2" for customers looking for more compact and cost-effective products. Additionally, it provides detailed information on CC-Link IE field networks and FA integrated networks, making it a useful reference. [Contents (partial)] ■ Concept ■ Lineup ■ Solutions ■ Overview of Servo System Controllers ■ Motion Controllers *For more details, please download the PDF or feel free to contact us.

  • controller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

MELSERVO-J5 Series Catalog

By achieving high-speed and high-precision, we contribute to improving the productivity of our customers' equipment!

This catalog introduces the Mitsubishi Electric AC servo system "MELSERVO-J5" that we handle. It also provides detailed information on the features of servo system controllers and embedded servo system controllers, as well as the utilization of SSCNETIII/H assets. Presented alongside photos and diagrams, this catalog serves as a useful reference when selecting products. Please feel free to download and take a look. 【Contents (partial)】 ■ Concept ■ Lineup ■ Servo System ■ Servo System Controller ■ Embedded Servo System Controller *For more details, please download the PDF or feel free to contact us.

  • Servo

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tension Controller "LE7-40GU-L"

All the necessary functions condensed into this one unit! A compact all-in-one tension controller.

The "LE7-40GU-L" is a tension controller that complies with international standards such as CE marking and KC mark. It features an intuitive operation through a touch panel LCD, and its simple button design allows for easy use. Additionally, it comes standard with Ethernet and RS-485 communication functions, enabling smooth integration with various general-purpose FA networks and higher-level controllers. 【Features】 ■ More compact size compared to previous models ■ Screen display supports three languages ■ Comprehensive network and communication functions ■ Enhanced control functions *For more details, please download the PDF or feel free to contact us.

  • 1.png
  • 2.png
  • 3.png
  • controller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration