Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.
421～450 item / All 861 items
100V direct, transformerless!
●Space-saving: No separate controller is needed, making it easy to change the layout of the line. ●Lever start: Ideal for temporary tightening work and for correcting the tilt of screws while tightening. ●Push start: Best for smooth continuous operations. ●Lever start that makes it easy to align screws.
Compliance with overseas safety standards (UL certification) / CE compliance
The MC-5M type 5-phase stepping motor driver is a compact driver with a DC24V input and a maximum drive current of 1.4A per phase. Due to its pentagon drive method, it is significantly smaller and lighter compared to conventional drivers. The target motors are 5-phase stepping motors from manufacturers like Tamagawa Seiki and Oriental Motor, with current ratings ranging from 0.5A per phase to 1.4A per phase. Switching between full step and half step modes, as well as selecting the pulse input method, can be easily configured using a switch. 【Main Features】 - Compact driver with a maximum drive current of 1.4A per phase - Single power supply of DC24-36V - Utilizes a photo-coupler input circuit - Built-in automatic current reduction function to suppress motor heating - Lightweight and compact, ideal for equipment integration - Two types of base plates are provided to allow for installation variations.
Adopts a low heat generation circuit to suppress driver heating! Compact driver with a maximum driving current of 2.8A per phase.
The MC-S5G type 5-phase stepping motor driver is a newly designed product in the S series (formerly known as the MC-5G type). Compared to conventional drivers, it has significantly lower heat generation, is compact, and lightweight. The target motors are 5-phase stepping motors from Tamagawa Seiki and Oriental Motor with a current range of 1.0A/phase to 2.8A/phase. Switching between full step and half step, as well as selecting the pulse input method, can be easily set with a switch. 【Main Features】 - Adopts a low heat generation circuit to suppress driver heat. - A compact driver with a maximum drive current of 2.8A/phase. - Single power supply of DC24V. - Utilizes a photcoupler input circuit. - Includes an automatic current down function to reduce motor heat generation. - Lightweight and compact, making it ideal for equipment integration.
It is a high-performance product that incorporates functions such as a self-test circuit and an automatic current down circuit.
The MC-S0528 type 5-phase stepping motor driver is a newly designed DC24 input 5-phase micro-stepping driver (formerly MC-0528G type) for the S series. Due to its micro-stepping method, it offers low vibration, low noise, and high resolution step driving compared to conventional basic step drivers. 【Main Features】 - A compact driver with a driving current of 2.8A per phase for micro-stepping. - Capable of up to 250 divisions (125,000 pulses per revolution) in micro-stepping. - Achieves 1 pulse/0.01 degrees at 72 divisions. - Remarkably low vibration even during full and half-step driving. - Utilizes a photo-coupler input circuit. - A high-functionality product that includes features such as a self-test function circuit and an automatic current down circuit. - Micro-stepping division settings and driving current settings can be done with a single touch. - Lightweight and compact, making it suitable for integration into devices that are sensitive to vibration.
It is a 5-phase stepping motor driver with an input of AC100V to 115V and a drive current of 0.35A/phase to 1.4A/phase.
【Main Features】 - Complies with CE and RoHS standards. - A 5-phase stepping motor driver with an input of AC 100V to 115V. - Capable of microstepping with a maximum of 250 divisions (125,000 pulses per revolution). - Achieves 1 pulse/0.01 degrees at 72 divisions. (MC-S5514T-3) - Remarkably low vibration even during full and half-step driving. (Except for MC-S5514T-3) - Suitable for a wide range of motors from 0.35A/phase to 1.4A/phase.
DC 5V single power supply, constant voltage drive! Up to 250 divisions (125,000 pulses per revolution) of microstepping is possible.
The MC-0503 model is an ultra-compact 5-phase micro-stepping driver powered by a DV5V supply. Due to its micro-stepping drive method, it enables low vibration, low noise, and high-resolution motor driving compared to conventional basic step drivers. When using a 5-phase stepping motor with a step angle of 0.72 degrees, it can drive up to 125,000 pulses per revolution. 【Main Features】 - Single DC5V power supply, constant voltage drive - Compact driver with micro-stepping capability - Up to 250 divisions (125,000 pulses per revolution) of micro-stepping possible - 1 pulse/0.01 degrees possible at 72 divisions (MC-0503-3) - High quality and low cost achieved through surface mounting - Bipolar pentagon drive method allows selection of 16 different division counts via switch - Signal input is exclusively for 2-pulse input method - Low vibration drive even when selecting division counts of 1 or 2 (full, half)
It is a 5-phase stepping motor driver with an input of AC100V to 115V and a maximum drive current of 2.8A per phase.
The MC-5528P type 5-phase stepping motor driver is a 5-phase microstepping driver with an AC100V input. Due to its microstepping drive method, it offers low vibration, low noise, and high resolution motor drive compared to conventional basic step drivers. When using a standard motor with a step angle of 0.72 degrees, it can drive up to 125,000 pulses per revolution. 【Main Features】 - 5-phase stepping motor driver with AC100V to 115V input - Capable of microstepping with a maximum of 250 divisions (125,000 pulses per revolution) - 1 pulse/0.01 degrees possible at 72 divisions (MC-5528P-3) - Remarkably low vibration even during full and half-step driving (excluding MC-5528P-3) - Adopts a connector type that contributes to labor-saving in wiring
It is a 5-phase stepping motor driver with an input of AC200V to 230V and a maximum drive current of 2.8A per phase.
The MC-S7528P/S7528P-3 model is a 5-phase stepping motor driver with an input of AC200V to 230V and a maximum drive current of 2.8A per phase. With the built-in low vibration function, vibrations during full and half stepping have been further reduced. It adopts a connector type that contributes to labor-saving in wiring. 【Main Features】 - It is a 5-phase stepping motor driver with an input of AC200V to 230V and a maximum drive current of 2.8A per phase. - It supports microstepping with a maximum of 250 divisions (125,000 pulses per revolution). - It can achieve 1 pulse/0.01 degrees at 72 divisions. (MC-S7528P-3) - The built-in low vibration function has further reduced vibrations during full and half stepping. - It adopts a connector type that contributes to labor-saving in wiring.
The standard model of the S series, which has achieved a 40% reduction in size due to the new design.
The S series "MC-S0514-L" has been newly designed to achieve miniaturization and low cost while maintaining high quality and ease of integration into equipment. It has achieved a 40% reduction in volume compared to the conventional equivalent product "MC-0514-L." New features have also been added, making it an optimal driver that can be applied to various products in all fields. 【Main Features】 - Drive current switching function → Selectable between 0.35A/phase, 0.75A/phase, and 1.4A/phase - Capable of switching between 2-series and 3-series microstepping divisions - Compatible with motors ranging from 20mm square to 86mm square - Applicable to various products in all fields
Compact! Low price! Low vibration, multi-axis one-board type 5-phase stepping motor driver "S Series"
The S series "MC-S0514" has been newly designed to achieve miniaturization and low cost, with the aim of maintaining high quality and ease of integration into equipment. Compared to the conventional equivalent product "MC-0514," it has achieved a 40% reduction in volume ratio. New features have also been added, making it a suitable driver that can be applied to various products in many fields. The lineup consists of four types: 1 axis: MC-S0514-L 2 axes: MC-S0514-2L 3 axes: MC-S0514-3L 4 axes: MC-S0514-4L 【Main Features】 - A more affordable and smaller micro-stepping driver - Drivers compatible with 0.35A/phase, 0.75A/phase, and 1.4A/phase - Remarkably low vibration even during full and half-step driving - Utilizes a photcoupler input circuit - Built-in automatic current reduction function - Compact and lightweight, ideal for integration into devices that are sensitive to vibration
Achieved a 40% (area ratio) resize with the new design!
The 5-phase stepping motor driver S series has been newly designed to maintain high quality and ease of integration into equipment, achieving miniaturization and low cost. It has achieved a 40% reduction in volume compared to conventional equivalent products. New features have also been added, making it an optimal driver applicable to various products in all fields. 【Main Features】 - Drive current switching function → Selectable between 0.35A/phase, 0.75A/phase, and 1.4A/phase - Switchable microstepping division between 2 series and 3 series - Applicable to various products in all fields
Incredible low vibration! It is suitable for embedding in small, lightweight devices that dislike vibrations.
Low-vibration, high-performance model achieved with lower price and more compact size 【Main Features】 - Input power: DC24V - 0.35–1.4A/phase compatible driver - Drive current and holding current can be switched in 16 steps - Two out of 16 types of microstep driving can be switched via signals - Achieves astonishingly low vibration even in full and half-step driving - Compact and lightweight, suitable for integration into devices that dislike vibration - Compliant with RoHS and CE standards
Lightweight and compact, perfect for equipment integration! DC 24V input, driver with a maximum drive current of 0.35A per phase.
The 5-phase stepping motor driver 'MC-S3ML' is a compact driver with a maximum drive current of 0.35A per phase. It has a built-in automatic current reduction function to suppress motor heating. A harness set for wiring (sold separately) is also available. 【Main Features】 - Single power supply of DC24V - Uses a photo-coupler input circuit - Lightweight and compact, ideal for equipment integration
Ideal for embedding in lightweight, compact devices that dislike vibrations! Driver for ultra-compact micro-stepping with a drive current of 0.35A per phase!
The 5-phase stepping motor driver 'MC-S5035' is a driver for microstepping with a drive current of 0.35A per phase. It is capable of a maximum of 250 divisions (125,000 pulses per revolution) of microstepping. Its lightweight and compact design make it suitable for integration into devices that are sensitive to vibrations. 【Features】 ■ A low-cost driver for 0.35A per phase microstepping. ■ Capable of a maximum of 250 divisions (125,000 pulses per revolution) of microstepping. ■ Achieves 1 pulse/0.01 degrees at 72 divisions. ■ Remarkably low vibration even during full and half-step driving. ■ Utilizes a photo-coupler input circuit. ■ A high-functionality product with built-in features such as a self-test circuit and automatic current down circuit. ■ Lightweight and compact, making it suitable for integration into devices that are sensitive to vibrations.
A DC power supply with AC-like high precision and high torque V-up driver, contributing to cost reduction and miniaturization of equipment.
The "MC-S0514L-HS" is a new type of driver developed independently by our company, featuring a built-in boost circuit to achieve even higher speed and torque than conventional products. The V-up driver has been added to the S series! It enables torque increase in high-speed ranges without raising the input voltage to the driver. This high-power driver contributes to cost reduction and miniaturization of the entire system. 【Main Features】 - A more affordable and compact micro-stepping driver - Boost voltage can be switched in 16 steps - Compatible with drivers of 0.35A/phase, 0.75A/phase, and 1.4A/phase - Remarkably low vibration even during full and half-step driving - Utilizes a photo-coupler input circuit - Built-in automatic current reduction function - Compact and lightweight, ideal for integration into devices sensitive to vibration
CE compliant and RoHS compatible 5-phase stepping motor driver with DC 24V input, 1.2A/phase, 1.8A/phase, 2.4A/phase.
This is a microstep driver that achieves lower prices and greater miniaturization. Main features: - It is a 5-phase stepping motor driver with a DC 24V input. - It supports drivers of 1.2A/phase, 1.8A/phase, and 2.4A/phase. - It has astonishingly low vibration even during full and half-step driving. - It employs a photocoupler input circuit. - It has a built-in automatic current reduction function. - It is compact and lightweight, making it suitable for integration into devices that are sensitive to vibration.
Achieve easy control with commands using motor control functions! Supports complex control between axes!
The "EtherCAT-compatible 4-axis integrated 5-phase stepping driver CTDR-0514ES-4LS" is equipped with motor control functions, allowing command-based control of target position, speed, and acceleration/deceleration settings. It can control stepping motors with the same controller as servo motors, and the integrated 4-axis design contributes to reduced wiring and space-saving. By applying synchronous start and continuous interpolation functions, complex control between axes is also possible. (*A more compact and lightweight version with additional features, available in "2-axis type" and "4-axis type," will be released this summer!) 【Features】 ■ No constant motor control required on the master side, reducing the burden on software ■ Drive current can be set for each axis from three types: 0.35A, 0.75A, and 1.4A ■ Supports up to 250 divisions (16 types total) of micro-stepping drive ■ EtherCAT Conformance TEST compliant product ■ Compatible with Omron's "NJ series" and Beckhoff's "TwinCAT" for development *For more details, please download the PDF or feel free to contact us.
Sub-device with motor profile function, 5-phase stepping driver. Up to 4 axes can connect stepping motors.
The "CTDR-0514ES-2LS/4LS" is an EtherCAT-compatible slave with motor control functions such as target position, speed, and acceleration/deceleration settings, and it is a 5-phase stepping driver. It can operate with master devices such as the "PXEP-CN" from Cosmotex and other master boards that have passed the official ETG tests. By utilizing synchronous start and continuous interpolation functions, complex control between axes is also possible. You can select the drive current from three options: 0.35A, 0.75A, and 1.4A. It supports a maximum of 250 divisions (16 types) of microstepping drive. 【Features】 ■ Supported network: EtherCAT ■ I/O control: Easy control with PDO and SDO ■ Number of controlled axes: 2-axis type / 4-axis type ■ Functions: Synchronous start / Interpolation control ■ PLC compatibility: NJ series / Sysmac compatible *For more details, please refer to the PDF document or feel free to contact us.
Realtime Express Dedicated 4-Axis Integrated 5-Phase Stepping Driver CTDR-0514NS-4LS
This is a 4-axis integrated 5-phase stepping driver that enables the connection of commercially available 5-phase stepping motors to the RealTimeExpress (RTEX) servo network. It can be controlled by RealTime Express controllers developed by our company, such as the PXRP-3216CN and CSRC-32CN-RP. 【Features】 ■ Supports microstepping drive with a maximum of 250 divisions. ■ Up to 8 units and 32 axes can be connected on the same network. ■ Drive current can be selected from 0.35A to 1.4A. ■ Motors with 5 or 10 lead wires are compatible. *Motors are also available through Cosmotex. Please feel free to contact us.
![[Example] NEW Funiture System Brushless (R) Driver](https://image.mono.ipros.com/public/product/image/a24/38682005/IPROS_17439502788185610000.jpg?w=280&h=280)
Improving screws and drivers is the first step towards reducing the defect rate.
We propose reliable fastening and high-quality management by resolving issues with the new fastening system.
Preventing screw mistakes on behalf of the worker with the counter function.
A power supply with a screw counter that allows you to set the number of screws to be tightened from 1 to 99, displaying the remaining count in a countdown after each tightening.
A counter-compatible screwdriver that prevents forgetting to tighten screws when combined with the screw counter VZOP-STC.
Attached output signal dedicated to the screw counter.
A global standard model that achieves extremely low prices while maximizing quality, durability, and easy maintenance!
As the first phase of the functional expansion, we have released the BLG driver. As the second phase, you can update (for a fee) only the functions of the built-in counter BLG-BC1.
Are you troubled by the mixing of screws of different lengths?
The unprecedented driver "Skilled Worker" developed by our company. For example, even if an 8mm screw is mixed in with a 6mm screw, it can detect this during the tightening process and prevent it from being released.
初心者だって、たった30秒で熟練工。
熟練工BLG-ZERO1はドライバー自身がデジタル管理でネジ締め不良をしっかりガード。ティーチングは3ステップのシンプル設定で、初心者でも安心です。
![Screw Tightening Training Materials Basic Knowledge [Excerpt Version]](https://image.mono.ipros.com/public/product/image/e25/2000396540/IPROS8241243026157242879.jpg?w=280&h=280)
Easy explanations of correct screw tightening methods and basic knowledge of electric screwdrivers with illustrations.
The "Screw Tightening Educational Material" is a document that contains basic knowledge about screws and screwdrivers. Screw tightening work is simple yet complex. It is a field that requires many skills, experiences, and intuition from seasoned professionals. This book consolidates the screw tightening knowledge that beginners need to acquire in order to become experienced, resulting in a document that is thorough, easy to understand, and satisfactory for the reader. If you are looking for something like this, please feel free to contact us. [Contents] ■ Basic knowledge of electric screwdrivers ■ Handling of electric screwdrivers ■ Correct screw tightening procedures ■ Daily inspections before work ■ Tightening Q&A * For more details, please refer to the PDF document or feel free to contact us. * The downloadable PDF document is an excerpt version. If you would like the complete version, please contact us.
Industry's smallest! AC servo motors ideal for miniaturization and high density of semiconductor manufacturing equipment, chip mounters, etc.
The ultra-compact AC servo motor/driver "TBL-imini series" is one of the smallest in the industry. It is ideal for miniaturization and high density in semiconductor manufacturing equipment, chip mounters, and small X-Y tables. Additionally, we offer an ultra-compact AC servo motor series with mounting dimensions of 14.5mm, 19.5mm, and 22mm. We also provide sensors tailored to your needs, including incremental encoder types and resolver types.
High precision, high torque, and capable of closed-loop control with stall detection using an angle detector.
The 2-phase stepper motor/driver is attractive for its high precision, high torque, high speed, and performance suited to various applications. A stepper motor generally receives pulse signals from an external source and attracts the rotor with the electromagnetic force generated in the stator windings, causing the output shaft to rotate by an angle proportional to the number of pulse signals. The rotation speed is determined by the frequency of the input pulse signals (pulse frequency), while the rotation angle is determined by the total number of input pulse signals. The 2-phase step driver can switch between full step and half step modes. For more details, please download the catalog.
Due to its excellent acceleration characteristics, instantaneous operation for starting, stopping, and reversing is possible.
5-phase stepper motors/drivers are superior in many aspects such as resolution, vibration, and high performance compared to 2-phase stepper motors. All models (5-phase stepper motors and 5-phase stepper drivers) comply with RoHS. Stepper motors generally receive pulse signals from an external source, and the electromagnetic force generated in the stator windings attracts the rotor, causing the output shaft to rotate by an angle proportional to the number of pulse signals. The rotation speed is determined by the frequency of the input pulse signals (pulse frequency), while the rotation angle is determined by the total number of input pulse signals. On the other hand, the unit step angle is determined by the mechanical structure of the rotor and stator. Additionally, 5-phase stepper drivers are low-cost and compact. For more details, please download the catalog.
Currently offering a comprehensive catalog! Featuring a wide variety of items including stepping motors!
The comprehensive catalog for the motion control system includes a wide range of products tailored to various applications, starting with the 5-phase stepping motor driver "KR-A5M," the 5-phase stepping motor "20mm square series," and the 1/2-axis compatible motion control units "KR210AU/220AU." Currently, we are offering a free comprehensive catalog! 【Contents】 ○ Selection Guide ○ Product Composition ○ Specifications ○ Connection Diagrams ○ Outline Diagrams For more details, please contact us or download the catalog. *This catalog is a digest version. If you need the full version, please contact us.
