This driver has a very high repeatability and stability in torque values due to its current control method.
You can tighten or loosen screws with either right-hand or left-hand threads. The controller can be connected to a computer via USB, allowing for the setting and confirmation of various parameters from the computer.
- Torque conversion is possible with a button (7 types)
- Normal rotation speed and tightening rotation speed can be set (e.g., Normal: 2,000rpm, Tightening: 700rpm, etc.)
- Standard equipped with IO input and output terminals
- Improved productivity through reduced setup time
- Various customizations are possible
Process 1: Set the rotation angle and perform screw tightening for the specified angle.
Process 2: Perform torque tightening for the remaining few rotations at the recommended rotation speed.
Benefits
By separating the processes, you can set Process 1 to the maximum rotation speed [2,000rpm] and Process 2 to the [recommended rotation speed], allowing for stable torque tightening. The rotation angle can be set in 10-degree increments from 0 to 18,000 degrees, making it suitable for long screws.
Example: M2 × Pitch 0.4 × Length 20mm → 20 / 0.4 × 360 = 18,000 degrees
If the seating occurs before the set angle in Process 1, an error can be detected. By detecting the error, it is possible to prevent screw selection mistakes.
![[Free demo unit available] High-precision CW compact LD driver](https://image.mono.ipros.com/public/product/image/74b/2000899264/IPROS9214004990375037990.jpg?w=280&h=280)
