glueのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

glue×東亞合成 - メーカー・企業と製品の一覧

glueの製品一覧

1～13 件を表示 ／ 全 13 件

表示件数
Visible light and ultraviolet curing type adhesive "Alonix LCR Series"

Visible light and ultraviolet curing type adhesive "Alonix LCR Series"

Transparent and translucent materials that do not allow ultraviolet light can be bonded in seconds! Suitable for joining and assembling optical components.

The "Aronix LCR Series" is an adhesive that can cure over a wide wavelength range from ultraviolet to visible light. Visible light can penetrate transparent and translucent materials that do not allow ultraviolet light to pass through, enabling bonding in seconds when irradiated from above these materials. Additionally, visible light is more considerate of human health compared to ultraviolet light, and the light source equipment is relatively inexpensive. 【Features】 ■ Compatible with a wide wavelength range from ultraviolet to visible light ■ Capable of bonding transparent and translucent materials that do not allow ultraviolet light to pass through in seconds ■ Grades can be selected according to the substrate, such as resin, glass, and metal ■ High transparency makes it suitable for bonding and assembling optical components ■ Low shrinkage and low stress types are ideal for precision fixing *For more details, please refer to the PDF document or feel free to contact us.

  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ultraviolet and anaerobic curing type adhesive "Alonix BU Series"

Ultraviolet and anaerobic curing type adhesive "Alonix BU Series"

Instant bonding is possible with ultraviolet light exposure! It is used in a wide range of fields where adhesive reliability is required.

The "Aronix BU Series" is a one-component, solvent-free type of ultraviolet-curing anaerobic adhesive. It allows for instant bonding through UV irradiation, significantly reducing work time. The grades with anaerobic curing properties also cure in areas not exposed to UV light. With excellent tensile strength, peel strength, and impact strength, and high durability, it is used in a wide range of fields where adhesive reliability is required, including low-voltage, electronics, and automotive applications. 【Features】 - Instant bonding through UV irradiation significantly reduces work time. - Grades with anaerobic curing properties also cure in areas not exposed to UV light. - The use of primers and heat expands the range of adhesive applications. - Being one-component, it does not require weighing or mixing, making it convenient to handle. - As the main component is an oligomer, there is almost no shrinkage. *For more details, please refer to the PDF document or feel free to contact us.

  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Heat-resistant inorganic adhesive "Alon Ceramic"

Heat-resistant inorganic adhesive "Alon Ceramic"

Forms a hardened material that withstands high temperatures of 1,100 to 1,200℃! For heat-resistant bonding of metals, ceramics, quartz, and more.

"Alon Ceramic" is a heat-curing type of heat-resistant inorganic adhesive and filler. The product lineup includes "Alon Ceramic E," which is primarily composed of zirconia and silica, "Alon Ceramic D," which is made of alumina, and "Alon Ceramic C," which is based on silica. Due to its main components being fire-resistant ceramics like alumina and inorganic polymers, it exhibits excellent heat resistance. 【Features】 ■ One-component heat-curing type ■ Main components are fire-resistant ceramics like alumina and inorganic polymers ■ Forms a cured material that withstands high temperatures of 1,100 to 1,200°C ■ Demonstrates high adhesive strength to metals and ceramics even at high temperatures *For more details, please refer to the PDF document or feel free to contact us.

  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Polyester-based hot melt adhesive "Alon Melt PES Series"

Polyester-based hot melt adhesive "Alon Melt PES Series"

Improved work efficiency due to short-time adhesion! Excellent adhesion properties for resins such as PET and PVC, as well as metals.

The "Alon Melt PES Series" is a thermoplastic polyester-based hot melt adhesive. It has excellent durability and allows for the design of various resin properties through combinations of monomers. It excels in adhesion to resins such as PET and PVC, as well as metals, and can be used on a wide range of materials including fibers and wood. Custom production of film and sheet types is also available. 【Features】 ■ Excellent adhesion to resins such as PET and PVC, as well as metals ■ Usable on a wide range of materials including fibers and wood ■ Has crystalline properties ■ Improved work efficiency due to quick bonding ■ Custom production of film and sheet types available *For more details, please refer to the PDF document or feel free to contact us.

  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Gel-type instant adhesive "Aron Alpha GEL-EX"

Gel-type instant adhesive "Aron Alpha GEL-EX"

Just by screwing in the nozzle, it opens easily! A glue that applies smoothly without any stringing.

"Aron Alpha GEL-EX" is a gel-type instant adhesive that strongly bonds even with a small surface area. It can be applied to a wide range of materials, including not only metal, rubber, and plastic but also difficult-to-bond materials like polyacetal, which were challenging to bond with the conventional "Aron Alpha GEL-10," as well as leather. Additionally, it can achieve instant and strong adhesion even with slight gaps, effectively shortening and stabilizing the bonding process. [Features] - Wide range of applications - High strength - Clearance bonding - Gel form - Screw-cap container *For more details, please refer to the PDF document or feel free to contact us.

  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Light-curing instant adhesive "Aron Alpha LC-012" <Non-bleaching type>

Light-curing instant adhesive "Aron Alpha LC-012" <Non-bleaching type>

A light-curing instant adhesive that cures even faster than the regular type of Aron Alpha has arrived. Sample for evaluation is currently available.

The light-curing instant adhesive "Aron Alpha LC-012" possesses the characteristics of our conventional instant adhesives while also having light-curing properties. It can be instantly cured by light exposure, making it suitable for precision parts and applications that require high design quality, which were previously unusable due to whitening issues. Additionally, it cures instantly not only in dark areas but also on surfaces, overflows, and thick film areas, leaving no surface tack. Therefore, it can be used for bonding around lenses and for bonding special uneven shapes. Since it eliminates the need for curing accelerators, there is no odor, and automation of the process is possible! ★ Currently, we are offering evaluation samples. Please try our light-curing instant adhesive. *You can view the product information from "PDF Download." If you would like a sample, please apply through the "Contact Form."

  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Low dielectric adhesive AF-700 film type for electronic materials/substrates

Low dielectric adhesive AF-700 film type for electronic materials/substrates

Aromite AF-700 ◆ A bonding film that combines top-class low dielectric properties and excellent adhesion in the industry. Ideal for bonding high-speed transmission substrate materials!

The "Aromite(R) AF-700 series" is a thermosetting bonding film that exhibits low dielectric properties in the high-frequency range (1-10GHz). Compared to conventional epoxy-based bonding films, it has lower dielectric constant and dielectric loss tangent, making it suitable for electronic material applications that require high frequency performance. It has good adhesion to substrates that are generally considered difficult to bond, such as polyimide and LCP, and also excels in processability during circuit board manufacturing. It has received high praise from circuit board material manufacturers and film manufacturers both domestically and internationally. It is used in mobile circuit boards, including smartphones, as well as in automotive millimeter-wave radar and antenna components for base stations.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Adhesive for Styrofoam (Alon Alpha)

Adhesive for Styrofoam (Alon Alpha)

Instant adhesive can be used without melting Styrofoam! It is also recommended for crafting applications such as molds, Styrofoam modeling, art pieces, and model trains.

The instant adhesive for polystyrene foam is an instant adhesive that can bond without dissolving the polystyrene foam. It is colored, making the application area easy to see, and it has good workability as it is less likely to drip. It can also be used for bonding wood and paper. <Features> ■ Can bond difficult-to-adhere polystyrene foam (low to medium expansion rate) ■ Good workability - High viscosity (3,000 mPa·s/25°C) makes it less likely to seep in and drip - Colored for easy visibility of the application area. * Since the color remains after curing, please be careful of overflow when using it for craft purposes. * Some foamed materials, such as PMMA, may dissolve, so please check in an inconspicuous area before use. * For more details, please request a catalog or download the PDF to view.

  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Styrofoam Adhesive (for Models/ Crafts/ Dioramas)

Styrofoam Adhesive (for Models/ Crafts/ Dioramas)

Instant adhesive that bonds without melting Styrofoam! Recommended for crafting applications such as molds, Styrofoam modeling, art pieces, and model trains.

The instant adhesive for polystyrene foam is an instant adhesive that can bond without dissolving the polystyrene foam. It is colored, making the applied areas easy to see, and it has good workability as it is less likely to drip. It can also be used for bonding wood and paper. <Features> ■ Can bond difficult-to-adhere polystyrene foam (low to medium expansion rate) ■ Good workability - High viscosity (3,000 mPa·s/25℃) makes it less likely to seep in and drip - Colored for easy visibility of applied areas. * Since the color remains after curing, please be careful of overflow when using it for crafting purposes. * Some foamed materials, such as PMMA, may dissolve, so please check in an inconspicuous area before use. * For more details, please request a catalog or download the PDF to view.

  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Adhesive Catalog

Adhesive Catalog

One-component, solvent-free types and hot melt adhesives! We have a wide range of products available.

This catalog introduces a variety of "adhesives" handled by Toa Gosei. Starting with the one-component, solvent-free "light-curing adhesive Alonix," which hardens quickly when exposed to light, we also feature "high-performance reactive adhesive Alon Mighty" and "instant adhesive Alon Alpha" among our lineup. Please use this for selecting products. [Featured Products (Excerpt)] ■ Light-curing adhesive "Alonix" ■ High-performance reactive adhesive "Alon Mighty" ■ Polyester-based hot melt adhesive "Alon Melt PES" ■ Instant adhesive "Alon Alpha" ■ Modified olefin-based hot melt adhesive "Alon Melt PPET" *For more details, please refer to the PDF document or feel free to contact us.

  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Light-curing adhesive "Alonix Series"

Light-curing adhesive "Alonix Series"

Wide range of adhesion is possible with electronic components, metals, glass, plastics, etc.! Hardness, viscosity, and curing properties can be adjusted.

The "AroNix Series" is a light-curing adhesive that can bond over a wide wavelength range of ultraviolet and visible light. Starting with the visible light and ultraviolet curing type "LCR Series," we also offer the ultraviolet anaerobic curing type "BU Series" and the ultraviolet curing type "UV-3000 Series." Additionally, depending on the materials and the shape of the substrates, we have anaerobic types that can cure even in areas not exposed to ultraviolet light. 【Features】 ■ Single-component, lightweight, and no mixing required ■ Cures quickly with light ■ Reduces working time and lowers costs ■ Wide selection and design options for curing wavelengths, anaerobic properties, and cured material characteristics *For more details, please refer to the PDF document or feel free to contact us.

  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ultraviolet Curing Adhesive "Alonix UV Series"

Ultraviolet Curing Adhesive "Alonix UV Series"

Adjustable hardness, hardness, and viscosity! Suitable for a wide range of bonding including electronic components, metals, glass, and plastics.

The "Aronix UV Series" is a one-component UV-curable resin formulation based on the acrylic-based special monomer and oligomer "Aronix M Series" developed by Toa Gosei. It can be used in conjunction with heat curing as needed, allowing for curing from thick films to thin films. Additionally, it can produce cured materials that range from tough to flexible and elastic, enabling a wide selection and design of curing methods and properties of the cured products. Furthermore, due to its rapid curing under ultraviolet light, it facilitates the automation and acceleration of manufacturing processes, leading to significant cost reductions. 【Features】 ■ One-component, excellent workability ■ Cures quickly under ultraviolet light ■ Easy automation and acceleration of manufacturing processes ■ Significant cost reduction possible ■ Wide selection and design of curing methods and properties of cured materials *For more details, please refer to the PDF document or feel free to contact us.

  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Modified olefin-based hot melt adhesive "Alon Melt PPET"

Modified olefin-based hot melt adhesive "Alon Melt PPET"

Solidification and adhesion are possible in a short time! We also offer grades with added properties such as adhesion.

The "Alon Melt PPET Series" is a hot melt adhesive suitable for bonding difficult-to-adhere resins such as PP, PE, PET, and nylon, with modified olefin as the main component. It cures and bonds quickly, and is available in stick and pellet types, allowing for work with simpler handguns. The pellet, block, and stick types are 100% solid and are environmentally friendly adhesives. 【Features】 ■ Main component is modified olefin ■ Suitable for bonding difficult-to-adhere resins such as PP, PE, PET, and nylon ■ Grades with enhanced properties such as adhesion are also available ■ Cures and bonds quickly ■ Work with simpler handguns is also possible *For more details, please refer to the PDF document or feel free to contact us.

  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

glueに関連する検索キーワード

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.