Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
31～45 item / All 73 items
Flex Fit Grip (Round Type) LC / New LCM Series
It is of course ideal as a grip, as well as for protecting pipes and covering cable terminals. It is also used for masking, taking advantage of its durability. ● Available in inner diameters from 6.35mm to 50.0mm, with an inner length (length to the bottom) of up to 279.40mm. ● You can also choose the color. ● Made to order in lots of 50-100 pieces.
Softex Grip TX - New TXM Series
There is no need to forcibly design the outer anti-slip grooves in injection molding. It has a thick finish, providing not only durability but also a comfortable grip. ● Excellent durability. ● It has an anti-slip treatment, making it ideal for tools and health equipment. ● It can be used from existing molds, and you can choose the color as well.
Double Dip Grip
The double-dip grip with a double-layer structure has two main features. The first is that the inner liner is reinforced for strength, while the outer grip has a soft cushioning effect. The second feature allows for a unique combination by using different colors for the liner and the grip, which can enhance the design of your products. ● Being a two-layer structure made of durable PVC, it allows for reinforcement of the liner, making it all-weather resistant and durable. ● It can be adjusted in terms of material, color, and length, excelling in both practicality and design.
A collet press-fit tool holder that combines high gripping power and precision!
Using a dedicated hydraulic clamping device, the collet is pressed into the holder with a maximum pressure of 9 kN. This helps improve cutting conditions, tool life, machining accuracy, and surface roughness. (Features) - Tool runout accuracy of less than 3 μm (3xD) - Repeated accuracy of tool protrusion length of less than 10 μm - Tool exchange possible in less than 10 seconds - Hygienic and skill-free, without the use of heat - Vibration suppression expected due to vibration damping effect - No decrease in tool gripping force even after 20,000 collet attachments and detachments - Compatible with BT (BBT), HSK, CAPTO Machining tool holders, collet press-fit type, dedicated hydraulic equipment, no heating required, skill-free, hygienic. *For more details, please refer to the PDF document or feel free to contact us.
You can achieve double the tightening force with the same size palm grip.
● The palm grip allows for double the clamping force with the same size palm grip by reducing friction on the inner surface. ● From a technical standpoint, the connection with bolts can be replaced with a clamping connection. ● Since a large clamping force can be achieved with a small amount of force, a compact palm grip can be used, which reduces assembly space. ● The loss of axial force is minimal, and the palm grip does not loosen due to vibrations or impacts. ● Since the clamping surface does not rotate, it does not scratch the workpiece.
A sturdy design that requires minimal maintenance! Suitable for testing elastomers, flexible plastics, and thin films.
The "2713 Series" is a self-tightening roller grip that offers excellent testing accuracy and a non-slip gripping action, allowing for quick and easy use. The upper grip is counterbalanced, enabling the elimination of non-axial loads on the test specimen in accordance with the load cell. We offer the "2713-002, 004," which features an eccentric roller clamp action where the clamping pressure increases with the load, and the "2713-007," designed for use under both room temperature and non-room temperature testing conditions. 【Features】 ■ Allows for quick insertion of test specimens, increasing testing efficiency and the number of tests conducted ■ Functional non-slip grip for obtaining accurate results ■ Suitable for testing elastomers, flexible plastics, and thin films ■ Robust design requiring minimal maintenance ■ Temperature range: ・2713-002, 004: -70℃ to 315℃ ・2713-007: -70℃ to +150℃ *For more details, please refer to the PDF document or feel free to contact us.
The direction of tension is coaxial with the grip body! The front is open, making it easy to insert the test specimen.
The "2710-100 Series" is a dual-action screw-type side action grip that allows for adjustment of the face to accommodate the thickness of the test specimen. The face comes in various sizes and can be selected and exchanged with different surface shapes such as flat surfaces, rubber-coated surfaces, and textured surfaces. There are also line contact surfaces and special coated surfaces available. The face can be easily replaced with one hand and in a short amount of time, without the use of tools or pins. 【Features】 ■ Capacity: 100N, 500N, 1kN, 2kN, 5kN, 10kN ■ Compatible with a wide range of test specimen thicknesses up to 46mm ■ The face can be exchanged in seconds through a sliding extraction/installation operation ■ Various face surface shapes and sizes are available for selection ■ The front is open, making it easy to insert the test specimen *For more details, please refer to the PDF document or feel free to contact us.
Usable in a wide temperature range from -80℃ to +250℃! Productivity and utility will be improved.
The "2716-028/030" is a high-precision manual wedge grip that provides a reliable gripping function for a wide range of materials and a repeatable alignment function that meets Nadcap requirement 1. The fixture faces can be instantly replaced without the use of special tools. The quick and easy operation of the grip improves productivity and usability compared to other gripping methods. 【Features】 ■ Capacity of 100kN and 250kN ■ Quick replacement of fixture faces without tools ■ Excellent repeatable gripping performance with a robust automatic centering mechanism ■ Sealed design to prevent dust and debris ■ A variety of fixture face options available *For more details, please refer to the PDF document or feel free to contact us.
Compact design convenient for testing small specimens! Introducing the manual wedge-shaped grip.
The "2716-01x/-02x/2736-01x series" is a manually operated wedge grip designed to facilitate the easy mounting, alignment, and positioning of test specimens. After mounting the test specimen, the gripping force increases as the test load increases. The structure of the grip body allows for movement, which effectively eliminates any initial load during the mounting of the test specimen. 【Features】 ■ Quick mounting and dismounting of test specimens ■ Easy mounting of test specimens to enhance productivity ■ Self-locking wedge structure prevents slipping of the test specimen ■ Ensures a consistent gauge length during specimen mounting ■ Compact design convenient for testing small specimens ■ A connection to the test system that is free of slack ■ Quick face replacement without tools *For more details, please refer to the PDF document or feel free to contact us.
Ideal for bonding long PVC sheets, PVC tiles, and artificial grass.
The one-component moisture-curing adhesive, Auton Floor Grip S, is a product developed for PVC flooring and artificial turf. It is ideal for long PVC sheets and PVC tiles, eliminating concerns about issues such as blistering associated with traditional epoxy adhesives. It cures properly even in cold regions and excels in impact resistance, water resistance, oil resistance, and heat resistance, making it suitable for a variety of substrates. For more details, please contact us or refer to the catalog.
Oil smoke liquefaction recovery device Mist Grip
Ideal for removing oil smoke, white smoke, and odors. A smoke liquefaction recovery device that minimizes carbon dioxide emissions and liquefies recovered oil smoke. 【Features】 ○ Low cost due to a collection method primarily using water ○ The water jet vortex has a laminar flow of 300mm thickness ○ The combination of eight layers of multi-layered jet water exhibits strong adsorption. ○ Approximately 5% of the collection agent is used in relation to the adsorbed substances (water can be operated in a closed system for several months) ○ Over 90% recovery of both oil smoke and odors is possible ○ Achieves even higher recovery when used in conjunction with the environmental improvement device Kesumakku ● For other functions and details, please download the catalog.
A smoke and odor recovery device capable of recovering over 90% of both smoke and odor.
Ideal for removing oil smoke, white smoke, and odors. A smoke liquefaction recovery device that minimizes carbon dioxide emissions and liquefies recovered oil smoke. 【Features】 ○ Low cost due to a collection method primarily using water ○ The water jet vortex has a laminar flow of 300mm thickness ○ The combination of 8 layers of multi-layered jet water exhibits powerful adsorption. ○ Approximately 5% of the collection agent is used in relation to the adsorbed substances (water can be operated in a closed system for several months) ○ Over 90% recovery of both oil smoke and odors is possible ○ Achieves even higher recovery when used in conjunction with the environmental improvement device Kesumakku ● For other functions and details, please download the catalog.
