We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for hardware.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

hardware Product List and Ranking from 85 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.

hardware Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.

  1. KEYes Fukuoka//IT/Telecommunications
  2. タツミ Niigata//Building materials, supplies and fixtures
  3. Three-Nine Shimno Co., Ltd. Osaka//Building materials, supplies and fixtures
  4. 4 ハギテック 本社工場 Chiba//Trading company/Wholesale
  5. 5 小庄金物 Osaka//others
Go to Company Ranking

hardware Product ranking

Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.

  1. Smart Padlock 2 (KYS-11) KEYes
  2. Magnetic Padlock "SKC Mechatlock ME21" 小庄金物
  3. Joining hardware "Tech One" タツミ
  4. 4 Pipe-type independent low column foot hardware "LB" タツミ
  5. 5 [Introduction of New Features] Realization of Lockout Operations Using Smart Padlocks KEYes

hardware Product List

166～180 item / All 354 items

Displayed results
[ABC Channel] CC

[ABC Channel] CC

For labor-saving in equipment and parts installation...! Structural materials for panels that can be installed without drilling holes.

The "ABC Channel (CC)" is a structural material for panels such as distribution boards, control panels, operation panels, and cubicles. It can be installed without drilling holes in equipment or parts, and by using this product, the middle plate can be omitted, reducing the number of processes. Please use it as a support hardware for mounting equipment, ducts, wires, busbars, piping, etc. 【Features】 ■ Design changes, expansions, and modifications are freely possible ■ Shortening of delivery times can be achieved ■ Assembly wiring can be done without waiting for the completion of the enclosure ■ Easy-to-use ABC parts are available, improving efficiency *For more details, please refer to the PDF materials or feel free to contact us.

  • A05-1.png
  • Distribution Board

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction to planning, design, and contract manufacturing of structural components such as building and industrial equipment hardware!

Introduction to planning, design, and contract manufacturing of structural components such as building and industrial equipment hardware!

Large-scale processing and mechanical parts are also OK! Are you struggling with outsourcing, labor shortages, or your existing equipment? We can solve your issues with iron/non-metal components through 'press and machining processing'!

Nakao Manufacturing Co., Ltd. is a hardware manufacturer that handles everything from design and planning to manufacturing and sales of hardware for doors and windows, residential equipment, industrial machinery, and furniture. In addition to various types of metal processing machines, we have added the latest machining equipment and are committed to thorough quality control using various inspection devices. We have achieved a reduction in processing and manufacturing processes that could not be accomplished with just press-processed products using our facilities! If you are facing challenges with contract manufacturing, including mass production projects, please feel free to consult with us! 【Some of our manufacturing achievements】 ■ Sliding door closers ■ Door hinges ■ Steel frames for door pockets ■ Door stoppers for swinging doors ■ Catches for folding doors ■ Case locks and many more *For more details, please download the PDF or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnetic padlock

Magnetic padlock

A mechatronic lock without a keyhole. Achieves a wide variety of key differences. Picking is also impossible.

No troubles such as sand or dust clogging the keyhole when used outdoors, or being tampered with and foreign objects being inserted! Picking is also impossible. A mechatronic lock without a keyhole. 【Features】 ○ Main body: Zinc die-cast Shackle: Brass chrome-plated ○ No keyhole - Unlike conventional padlocks, it cannot be unlocked with wire or pins due to the absence of a keyhole. - Ideal for outdoor use as it does not get clogged with sand or dust. ○ Locked with magnets - Patented locking mechanism utilizing magnetic repulsion. - Duplicate keys are impossible. ○ Simply place the key against the main body and turn to lock, making it easy to handle even in dark places. ○ By changing the arrangement of multiple magnets, a wide variety of key differences can be achieved. ● For more details, please contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hanging Type Padlock (65mm) 'LC-MEGA65'

Hanging Type Padlock (65mm) 'LC-MEGA65'

Adopts a dimple key cylinder! Compatible with the same key cylinder and specified numbers.

The "LC-MEGA65" is a heavy-duty 65mm long shackle padlock that is resistant to destruction. It features a special coating on the body that makes it resistant to rust. The interior of the body is covered with steel, enhancing its resistance to break-ins. Thanks to the reversible key, the key can be inserted in either direction, and it is compatible with the same key cylinder and designated numbers. 【Features】 ■ Special rust-resistant coating and robust anti-destructive measures ■ Steel-covered interior for excellent break-in resistance ■ Reversible key allows for operation in either insertion direction ■ Compatible with the same key cylinder and designated numbers *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fix for transom glass usable in a glass-walled shower room.

Fix for transom glass usable in a glass-walled shower room.

A clean design that doesn't obstruct the space with a door stop.

When creating a fully glass-walled shower room space, it may be necessary to use fittings to secure the transom glass and fixed glass. In such cases, the "OT-B620-SUS" comes into play. It firmly holds the glass in place by sandwiching it. Additionally, it also serves as a door stop, allowing for a simple design. ★POINT★ ● The finish is a mirror finish that enhances the glass. ● Made of stainless steel with excellent corrosion resistance. ● Compatible glass thickness is 8 to 12 mm. ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Laura-style simple lock! Stainless steel adjustable gombe compatible with wooden doors.

Laura-style simple lock! Stainless steel adjustable gombe compatible with wooden doors.

The dimensions can be adjusted by up to 6mm, allowing for smooth installation and door opening and closing.

Introducing a stainless steel adjustable gombe that provides a simple lock for wooden doors that do not require locking. Even on doors that do not need to be locked, installing this will securely hold the door in a closed position. The roller part can be adjusted up to a maximum of 6mm by turning the adjustment screw, ensuring smooth installation and door operation. Since there is no need to install a locking mechanism integrated with a lever handle, you can freely choose the design of hardware such as handles and knobs. You can select from three finishes—black, gold, and hairline—to match the color of the carefully chosen hardware. Consider this for simple locking of wooden doors!

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement protector, protecting lives.

Seismic reinforcement protector, protecting lives.

Seismic reinforcement protector, protecting lives.

"Inochimamoru" is an add-on hold-down device that is installed from the outside of existing homes. By securing the foundation and columns together, it prevents "tenon pull-out," one of the main causes of collapse during major earthquakes, thereby protecting the structure from falling. ◇ It can withstand a pulling force of up to 7.36 tons! When installed on a reinforced concrete foundation (with a concrete compressive strength of 13 N/mm²), it has been experimentally proven to withstand a maximum pulling force of 7.36 tons on the columns. * The strength may decrease depending on the foundation's strength and the presence of rebar. ◇ It can be installed at a low cost Since it can be installed without cutting the walls, the cost is about 1/4 to 1/5 compared to cases where walls need to be cut. ◇ We offer covers that match the exterior walls There are upper and lower covers available, and you can choose from a total of four colors: hairline, ivory, brown, and beige. All are made of stainless steel, and the paint is baked on, providing excellent durability.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Post-installed hold-down hardware "Kazoku Mamoru"

Post-installed hold-down hardware "Kazoku Mamoru"

It protects homes from the pulling force of the Hanshin-Awaji Great Earthquake (4 tons).

"Kazoku Mamoru" is an add-on hold-down hardware that is installed on the exterior of a house. It is said that during the Great Hanshin-Awaji Earthquake, houses experienced a pulling force of 4 tons, and Kazoku Mamoru can withstand up to 4.5 tons. By securely connecting the foundation and columns, it prevents "tenon pull-out" and "separation," thereby mitigating damage from natural disasters such as earthquakes and tsunamis. It helps prevent the collapse of houses and protects important homes and families. Since it can be installed without breaking walls, it shortens construction time. Another feature is that it fixes the hardware to the columns with screws, resulting in less burden on the columns. *For more details, please download the catalog or contact us.*

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless steel column support 150 square, 200 square

Stainless steel column support 150 square, 200 square

Large column receiving stainless steel fittings

Large column support hardware, stainless steel hairline finish. Also available with black powder coating.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Joining hardware "Tech One"

Joining hardware "Tech One"

We offer a wide range of products, including the "Tech One P3," which achieves high-level construction with precision and durability!

We would like to introduce our joint hardware "Tech One." Starting with "Tech One P3," which achieves high-level construction with precision and durability, we also offer a rich lineup including "Tech One TCW," which realizes higher strength while being compact, as well as "Tech One 3S" and "HDP type." In addition, we handle anchor direct connection fittings "PBH-63" and beam support hardware "GUD." Please choose according to your application. 【Lineup (partial)】 ■ Jaw-hanging fitting (Tech One P3) TH ■ Jaw-hanging fitting (Tech One TCW) TCW ■ Jaw-hanging fitting (Tech One 3S) TL ■ Hold-down pipe (HDP type) processing φ22 ■ Mortise pipe (GP type) processing φ27 *For more details, please refer to the PDF document or feel free to contact us.

  • Other work tools
  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Joining hardware "Kuretec"

Joining hardware "Kuretec"

Strong frameworks are achievable! Introducing the hardware used to join structural members (such as columns and beams).

"Cretech" is a joining hardware made from JIS G 3131 SPHC material. A strong framework can be achieved with a simple combination of bolts and drift pins. It is used to join structural members (such as columns and beams). 【Sizes】 ■GDS-10: 93×40×100mm ■GK-10: 93×40×115mm ■GK-15: 128×40×145mm ■GK-21: 128×40×215mm ■GK-21: 128×40×215mm *For more details, please refer to the PDF document or feel free to contact us.

  • Other work tools
  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
OEM and custom metal fittings

OEM and custom metal fittings

It is possible to produce high quality at low cost! We are focusing on the production of custom metal fittings for wooden non-residential buildings.

Our company is focusing on the production of custom metal fittings for wooden non-residential buildings, which have seen an increase in demand in recent years. With the growing demand for hybrid structures combining steel and wood, as well as medium to large-scale wooden buildings, the fittings for joints are also becoming larger, leading us to produce custom items tailored to specific projects. Utilizing fiber laser processing machines, machining equipment, and welding machines, we handle all manufacturing in-house, from creating the design drawings for the fittings to production, plating, and specified inspections. By maximizing our long-developed metal processing technology and know-how as a precut factory, we are able to produce high-quality products at low costs. 【Features】 ■ The fittings for joints are becoming larger, and we conduct custom production tailored to specific projects. ■ All manufacturing is done in-house using fiber laser processing machines, machining equipment, and welding machines. ■ We handle everything from creating design drawings for fittings to production, plating, and specified inspections. ■ We maximize our long-developed metal processing technology and know-how as a precut factory. *For more details, please refer to the PDF document or feel free to contact us.

  • Other services
  • Other contract services
  • Other work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Joining hardware "Tech One P3"

Joining hardware "Tech One P3"

A strong framework is achievable! We have successfully established a simple and rational construction system.

The "Tech One P3" is a joining hardware that adds precision and robustness to traditional frame construction methods. We have successfully established a simple and rational construction system to enable safer and higher-level construction. The feedback from our customers stating that they "feel it during the assembly process" is our pride and a testament to our reliability. 【Features】 ■ A strong framework can be achieved with a simple combination of bolts and drift pins. ■ The corners are rounded for safety considerations. ■ By processing the bending of the back plate with an R treatment, we reduce deformation of the hardware caused by over-tightening bolts. ■ The hardware protrusion is compact at 100mm. *For more details, please refer to the PDF document or feel free to contact us.

  • Other work tools
  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Joining hardware "Tech One TCW"

Joining hardware "Tech One TCW"

Optimized board thickness, achieving high strength! Enabled application to a wider range of wooden structures.

"Tech One TCW" is a joining hardware that achieves higher strength while being compact. By maximizing the know-how of Nippon Steel Corporation's steel house, we have developed a new hardware that is more compact and has improved load-bearing capacity compared to the conventional Tech One, enabling its application to a wider range of wooden structures. By thinning the wing parts, we have optimized the critical and excess areas at the joints, and through a special riveting technique, we have made it possible to enhance the strength and compactness of the hardware simultaneously by joining two pieces of hardware together. 【Features】 - A strong framework can be achieved with a simple combination of bolts and drift pins. - By reducing the projection compared to Tech One P3 and thinning the plate, we have achieved a weight reduction of up to 40%. - By overlapping L-shaped hardware at the bolt connection surface, we have optimized the plate thickness and achieved high strength. *For more details, please refer to the PDF materials or feel free to contact us.

  • Other work tools
  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to hardware

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.