We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for hardware.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

hardware Product List and Ranking from 44 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.

hardware Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.

  1. KEYes Fukuoka//IT/Telecommunications
  2. タツミ Niigata//Building materials, supplies and fixtures
  3. サンコー機材 Osaka//others
  4. 4 Three-Nine Shimno Co., Ltd. Osaka//Building materials, supplies and fixtures
  5. 5 小庄金物 Osaka//others
Go to Company Ranking

hardware Product ranking

Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.

  1. Smart Padlock 2 (KYS-11) KEYes
  2. Equipment Various Piping Support Hardware Comprehensive Catalog VOL.22 サンコー機材
  3. Decorative cylindrical column base hardware "Deco-tube" タツミ
  4. 4 Pipe-type independent low column foot hardware "LB" タツミ
  5. 4 A smart padlock that achieves improved safety, enhanced operational efficiency, and increased security. KEYes

hardware Product List

211～225 item / All 343 items

Displayed results
Building hardware '208 Padlock B Line'

Building hardware '208 Padlock B Line'

Perfect for architectural hardware! This is a small 20mm brass padlock.

Hinomoto Lock Co., Ltd. is engaged in the development of locks for bags and suitcases, as well as accessory parts such as casters, with the motto of simple and excellent technology (Simple Excellence Technology). The "208 Padlock B Line" is a small 20mm brass padlock. [Features] ○ Lock (Padlock) ○ Made of brass For more details, please contact us or download the catalog.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Industrial Hardware Comprehensive Catalog [Locks, Handles, Casters, Hinges...]

Industrial Hardware Comprehensive Catalog [Locks, Handles, Casters, Hinges...]

Free distribution of the Industrial Hardware Comprehensive Catalog! Featuring over 300 products including locks, handles, casters, and hinges!

This is the comprehensive catalog of HINOMOTO, a manufacturer of locks for bags and cases, as well as various accessory parts. It features a wide range of locks, including snap locks and padlocks, along with over 300 products such as handles and casters. Currently, we are offering the comprehensive catalog for free to those who request it! 【Examples of Featured Products】 ◎ Locks ◎ Handles and Rings ◎ Casters ◎ Corner Fittings ◎ Rings, Holders, and Shoulder Pads ◎ Hinges ◎ Feet and Adjuster Bolts… *For more details, please request the materials or view the PDF data available for download. You can access an excerpt version from the download.

  • Assembly Jig
  • caster

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Knowledge Hub of the Screw Industry: Reevaluation of Wooden Construction and Joining Hardware

Knowledge Hub of the Screw Industry: Reevaluation of Wooden Construction and Joining Hardware

Finally, large-scale wooden structures are starting to be built.

This article introduces the reconsideration of wooden architecture and connection hardware. In large wooden structures, not only traditional hardware connection methods but also the development of new connection technologies and the combined use of architectural fasteners (screws and nails) are required for speedy and easy construction. Additionally, specifications for materials such as laminated timber and CLT (cross-laminated timber) have been established. The building code recommends the use of certified hardware, and in other cases, the use of JIS standard products seems to be permitted. Products manufactured by factories that comply with the various criteria of materials, product standards, manufacturing equipment, quality control, and quality assurance become JIS standard certified products. It is necessary to use connection hardware and connectors correctly according to the certified products. *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Large support hardware for Japanese-style rooms MO

Large support hardware for Japanese-style rooms MO

Supports when the 90-degree and 105-degree beams in Japanese-style rooms, etc., drop below the top of the horizontal members!

The "Large Beam Support Hardware MO for Japanese Rooms" is designed to accommodate large beams with dimensions of 90mm and 105mm when they are lower than the top of the horizontal members in Japanese-style rooms, etc. It is used when the beam level is between -1mm and -48mm. *For a beam level of 0mm, the beam support hardware MH for rafters and large beams should be used. The material is JIS G 3302 structural SGH400, and the surface treatment is hot-dip galvanized (Z27) and cationic electrodeposition coating. 【Features】 ■ Accommodates large beams of 90mm and 105mm when they are lower than the top of the horizontal members in Japanese-style rooms, etc. ■ Used when the beam level is between -1mm and -48mm ■ Material: JIS G 3302 structural SGH400 ■ Surface treatment: hot-dip galvanized (Z27), cationic electrodeposition coating *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Base metal fitting CKB

Base metal fitting CKB

Used for the connection between the foundation and the column base! Lineup of "CKB-105" and "CKB-120".

The "Column Base Hardware CKB" is used for the connection between the foundation and the column base. *Please secure it with anchor bolts of strength grade 4.8 or higher. The surface treatment is JIS H 8641 hot-dip galvanized HDZ 35. We offer "CKB-105" and "CKB-120" in our lineup. 【Features】 ■ Used for the connection between the foundation and the column base ■ Material - Plate part (9mm-6mm): Equivalent to SPHC - Round bar part (φ21.7): Equivalent to 20CrMo - Special washer: Equivalent to SPHC ■ Surface treatment: JIS H 8641 hot-dip galvanized HDZ 35 *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Base metal fitting MCK

Base metal fitting MCK

Basic packing specifications! Introducing column base hardware that can be used for column base connections.

The "Column Base Hardware MCK" is a column base hardware used for the connection of column bases with a foundation packing specification. We offer a lineup including "MCK-105CN" sized 105×300×355mm, as well as "MCK-120CN," "MCK-105ST," and "MCK-120ST" sized 120×307.5×370mm. 【Features】 ■ Used for the connection of column bases ■ Foundation packing specification ■ Material - Base part (4.5mm thick): JIS G 3101 SS400 - Base part (3.2mm thick): JIS G 3131 SPHC - Pipe part (φ21.7): JIS G 4053 SCM415 - Washer part: JIS G 3101 SS400 ■ Surface treatment - Entire column base hardware: Cationic electrodeposition coating - Round washer: JIS H 8610 (electro-galvanized) and JIS H 8625 Ep-Fe/Zn8/CM2 C *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Column base metal fittings MC

Column base metal fittings MC

A φ60 hole is drilled vertically in the foundation for construction! Introducing the column base hardware treated with cationic electrodeposition coating.

The "Column Base Hardware MC" is used for the connection of column bases. The surface treatment is cationic electrodeposition coating. A hole with a diameter of 60mm is drilled vertically into the base for installation. We offer two types in our lineup: "MC-105" and "MC-120." 【Features】 ■ Used for the connection of column bases ■ Material - Pipe section (φ21.7): JIS G 4053 SCM415 - Base body (4.5mm thick): JIS G 3445 STKM 12C - Base bottom plate (9.0mm thick): JIS G 3131 SPHC - Washer (6.0mm thick): Equivalent to JIS G 3101 SS400 ■ Surface treatment: Cationic electrodeposition coating *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Foundation joint hardware DT

Foundation joint hardware DT

Surface treatment specifications for hot-dip galvanized zinc (Z27)! Introducing the hardware used for joint connections of the base.

The "Foundation Joint Fitting DT" is used for joining foundation joints. The construction procedure involves inserting the DT into the foundation joint where the leading pin (on the lower end of the foundation) has been driven in, and then driving in two fixing pins to complete the process. The size available is 2.3×136×79 (mm). 【Features】 ■ Used for joining foundation joints ■ Material: JIS G 3302 SGHC ■ Surface treatment: Hot-dip galvanizing (Z27) *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double brace connector '2x Brace (Libero II)'

Double brace connector '2x Brace (Libero II)'

Reduces interference with floor panels and hold-down hardware! Bracing connection hardware for wall strength ratios of 2 times and 3 times.

The "Double Brace (Libero II)" is a brace joint hardware designed for wall shear resistance of 2 times and 3 times. It standardizes the use of screws to one type for ease of use and reduces interference with floor plywood and hold-down hardware. Additionally, the symmetrical shape of the hardware allows for installation without distinction between the top, bottom, left, and right of the brace. 【Features】 ■ Standardized use of screws to one type ■ Significantly improved work efficiency ■ Installable without distinction between the top, bottom, left, and right of the brace ■ Suitable for fixing braces on floor plywood (30mm thick or less) ■ Quality performance tested under the House Plus housing guarantee *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1.5 times brace connector (Libero)

1.5 times brace connector (Libero)

Can be installed without distinction on the upper, lower, left, and right ends of the brace! Brace connection hardware for a wall multiplier of 1.5 times.

The "1.5x Bracing (Libero)" is a bracing connection hardware designed for a wall strength of 1.5 times that can reduce interference with floor plywood and hold-down hardware. Since screws that attach to the foundation are not required, it can be installed even if floor plywood is placed between the foundation and the hardware. Additionally, by fixing the bracing at a position away from the edge of the horizontal member, interference with other hardware at the joint ends can be minimized. 【Features】 ■ No screws required to attach to the foundation ■ Can be installed even if floor plywood is placed between the foundation and the hardware ■ Can be installed without distinction in the up, down, left, or right directions at the ends of the bracing ■ Reduces interference with other hardware at the joint ends ■ Quality performance testing completed by a certified building material testing center *For more details, please refer to the PDF materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double Bracing Connector 'Double Bracing (Tri)'

Double Bracing Connector 'Double Bracing (Tri)'

Can be installed in any direction: lightweight and compact brace joint hardware.

The "Double Brace (Try)" is used when connecting 45mm x 90mm braces (with a wall multiplier of 2) to columns and horizontal members. It is lightweight and compact, and since the standard dimensions of the hardware are symmetrical, it can be installed in any orientation—up, down, left, or right. Additionally, in the case of a true wall, the "folded" part is cut out by 40mm, ensuring that the hardware is not exposed. 【Features】 ■ Lightweight and compact ■ Symmetrical standard dimensions of the hardware ■ Can be installed in any orientation—up, down, left, or right ■ In the case of a true wall, the "folded" part is cut out by 40mm, preventing hardware exposure ■ Certified equivalent to Z-mark hardware (BP-2) *For more details, please refer to the PDF materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double brace connector "Double brace (multi)"

Double brace connector "Double brace (multi)"

No screws needed to attach to the horizontal framing! A brace joint hardware that can be installed even with floor plywood in place.

The "Double Brace (Multi)" does not require notching of columns and beams, allowing for the connection of 45mm x 90mm braces (with a wall strength multiplier of 2). Since screws for fastening to the beams are not necessary, installation is possible even with floor panels in place (floor panels up to 28mm thick). Additionally, the width of the hardware is 45mm, making it more suitable for internal use. 【Features】 - No need to notch columns and beams - No screws required for fastening to beams - Installation is possible even with floor panels in place - Better fit for internal use - Equivalent to Z-mark hardware (BP-2) certification *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Diagonal brace connector "Hexa Plate SD"

Diagonal brace connector "Hexa Plate SD"

The embossed processing prevents the screw heads from being exposed! It is possible to directly attach load-bearing materials, etc., over the hardware.

The "Hexa Plate SD" is designed to be installed on the side of horizontal members, reducing interference with hold-down hardware and similar components. With a thickness of 0.6mm (compared to the conventional brace plates which are 2.3mm), it does not require notching, allowing for direct attachment of structural sheathing and similar materials over the hardware. This product is used when connecting the ends of braces that are 30mm×90mm or larger (wall strength ratio of 1.5 times), 45mm×90mm or larger (wall strength ratio of 2 times), and 90mm×90mm or larger (wall strength ratio of 3 times). 【Features】 ■ Reduces interference with hold-down hardware and similar components ■ Does not require notching due to its thin thickness of 0.6mm ■ Allows for direct attachment of structural sheathing and similar materials over the hardware ■ Embossed design prevents screw heads from being exposed ■ Performance certified by the Japan Housing and Wood Technology Center *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Brace connection hardware 'B-Eaglet Double'

Brace connection hardware 'B-Eaglet Double'

Internal use compatible! Hardware shape that avoids interference with vertical bolts for hold-downs.

The "B Eaglet 2x" is a hardware shape that avoids interference with vertical bolts for hold-downs, whether used externally or internally. In the joist method, it can be installed even in places where braces come at the edge of the joist. This product is used when joining the ends of braces (wall strength factor of 2) that are 45mm x 90mm or larger. 【Features】 ■ Hardware shape that avoids interference with vertical bolts for hold-downs ■ Reduces interference with hold-down hardware, etc., when used internally ■ Does not interfere with beam support hardware even at the junction with braces ■ Can be installed even in places where braces come at the edge of the joist ■ Certified equivalent to Z-mark hardware (BP-2) *For more details, please refer to the PDF materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double Bracing Hardware for Construction Method - Floor Plywood Version

Double Bracing Hardware for Construction Method - Floor Plywood Version

Used for floor plywood with a thickness of 30mm or less! It is a brace compatible with interior use for floor plywood.

The "Double Brace for Metal Construction Method - Floor Plywood Specification" is suitable for fixing braces on top of floor plywood (30mm thick or less). It is used when joining the ends of braces that are 45mm x 90mm or larger (with a wall multiplier of 2). The main metal body is attached to the column and horizontal members by using four dedicated square bit screws TB-76 on the side of the horizontal member and four dedicated square bit screws TBA-45 on the side of the column, all installed from above the floor plywood. 【Features】 ■ Floor plywood specification ■ Usable for conventional construction methods ■ Surface treatment: Hot-dip galvanized steel plate (Z27) ■ Standard shear resistance per meter for brace walls: 3.78kN ■ Material: JIS G 3302 (Hot-dip galvanized steel plate and steel strip) SGHC or SGCC *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to hardware

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.