Last Updated： Aggregation Period:Sep 30, 2026～Oct 27, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 30, 2026～Oct 27, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 30, 2026～Oct 27, 2026
This ranking is based on the number of page views on our site.
91～120 item / All 1343 items
Flexible hoses made of Teflon® with corrugated processing and cost reduction, enhancing flexibility!
Flexibility: Displacement absorption can be achieved between surfaces with a small curvature radius and short length. Abundant products: By utilizing the low friction properties of Teflon and varying the size, cost savings have been realized.
We offer a variety of types that can be selected according to the situation of the pipe!
At Kanto, we offer high-pressure cleaning hoses made from appropriate materials to suit drainage pipes in various environments. We have a diverse range of types available for selection based on the condition of the pipes, including the "Net Hose" and "High-Pressure Rubber Hose." 【Features】 <SKW Net Hose> ■ The exterior of the polyester tube is uniformly braided with stainless steel wire. ■ Excellent flexibility. <SKN Jet Hose> ■ Enhanced abrasion resistance of the cover, with a strong bond between the cover and the blade. ■ Excellent kink resistance to prevent bending during long use, allowing for prolonged usage. *For more details, please refer to the PDF document or feel free to contact us.
A unique lineup is available. Various industrial hoses manufactured by Continental.
Our company always prioritizes customer needs and enhances production performance by delivering a wide variety of hoses, as well as dedicated fittings and accessories. You are sure to feel satisfied with the trust in our unique lineup. We offer various types, including push-on hoses that do not require crimping, fuel hoses, suction hoses, marine hoses, and more. 【Features】 ■ Push-on fittings that do not require crimping ■ Can be cut to any desired length and assembled on-site ■ A rich variety of colors and size options (up to 1 cm) *For more details, please refer to the PDF document or feel free to contact us.
Ideal for cooling water hoses in furnaces and steel mills where insulation properties are required! Introducing a high-quality, low-cost electric-resistant hose.
We offer two types with operating pressures of 1.38 MPa (200 psi) and 2.07 MPa (300 psi). It features an excellent insulation structure (with a cover certified by the U.S. MSHA). It can be used in fluid circuits such as low-pressure hydraulic circuits and industrial robots. 【Currently Active in These Areas!】 It is widely used as a dedicated hose for cooling water in environments where insulation (electrical resistance) is required, such as steel mills and furnaces. 【Features of the Electrical Insulation Hose】 ■ Ensures an operating pressure of 300 psi (2.07 MPa) ■ Usable in fluid circuits such as low-pressure hydraulic circuits and industrial robots ■ Adopts an excellent insulation structure (with a cover certified by the U.S. MSHA) * Formerly Goodyear Wingfoot * For more details, please refer to the PDF document or feel free to contact us.
Can be used for cleaning within the factory. Economical antibacterial hose.
"SUPER SANI-WASH" is an economical antibacterial hose that can be used for cleaning in food processing plants, dairy factories, food packaging factories, bottling plants, breweries, canning factories, dairy product factories, and more. It has a surface treatment with antibacterial properties that can suppress bacterial growth. 【Features】 ■ For cleaning ■ Economical ■ Can suppress bacterial growth *For more details, please refer to the PDF document or feel free to contact us.
Bendable, lightweight, and durable! A transfer hose utilizing advanced technology.
"PLICORD EXTREMEFLEX PETROLEUM" is a transfer hose with high flexibility. Thanks to advanced technology, durability has been significantly improved. This enhances efficiency and reduces the burden on operators. It can be used for various transfers, including operations in tank trucks and factories, as well as gasoline, diesel, oil, ethanol, and petroleum. [Features] ■ High flexibility ■ Lightweight ■ High abrasion resistance ■ Bendable ■ Easy to use *For more details, please refer to the PDF document or feel free to contact us.
Essential for unmanned driving: Suitable for long-duration unmanned operation, can be used at high pressure without reinforcement. Cost reduction through anodizing for extended lifespan. Patent obtained.
Pinpoint supply to the targeted location! Introducing the i-TOOL coolant hose The i-TOOL coolant hose is a versatile coolant hose that excels in various applications such as cooling, air blowing, and suction. It maintains a firm position, allowing coolant to be supplied from a distance with the necessary pressure without the hose shifting, even under high pressure, for extended periods. Made of anodized aluminum, it can withstand high pressures of up to 8MPa. Compared to resin materials, it has a longer lifespan, contributing to cost reduction. ■ A starter kit that includes hoses, fittings, and nozzles is also available ■ Hose diameters available: 1/8, 1/4, and 1/2 in three sizes *For more details, please refer to the materials. Feel free to contact us with any inquiries.
Incredible, it can handle up to 8 MPa! Prevents coolant leakage due to the deterioration of the coolant hose.
- Increasing the pressure of the coolant pump cannot be handled by the resin nozzle. - Despite taking time to adjust the nozzle position, it quickly became misaligned. - During unmanned operation, the nozzle became misaligned without notice, causing processing defects. - Chips were left on the base, resulting in poor seating. Are you having any issues with your coolant hose? Introducing the "i-TOOL Coolant Hose," which can supply coolant for long periods from a distance, at the necessary pressure to the required areas! *For detailed case information, please refer to the related links. For more information, feel free to contact us.
PTFE hoses are excellent in corrosion resistance, heat resistance, non-stick properties, pressure resistance, and flexibility, making them suitable for piping that carries various fluids such as chemicals, steam, and oil.
The "PTFE Ultra High Pressure Hose S" is a PTFE hose handled by Chuo Giken Kogyo Co., Ltd. It is a straight hose with good pressure resistance. The maximum operating pressure varies depending on the diameter and usage conditions, but it is 34.5 MPa under hydraulic conditions. The maximum operating pressure is lower for gases (gas-phase fluids), so please inquire each time. It cannot be used with flammable, combustible, or toxic gases. 【Specifications】 ■ Reinforcement layer: SUS304 wire unibraid ■ Continuous operating temperature range: -54℃ to +204℃ ■ Meets the conditions of US SAE standards 100R8 and 100R9. ■ Static electricity prevention type *For more details, please refer to the PDF document or feel free to contact us.
PTFE hoses are excellent in corrosion resistance, heat resistance, non-stick properties, pressure resistance, and flexibility, making them suitable for piping that carries various fluids such as chemicals, steam, and oil.
The "PTFE Flexible Hose F-1 Liquid Contact Part PTFE" is a PTFE hose handled by Chūnichi Giken Kōgyō Co., Ltd. It features a deep corrugated design, providing excellent flexibility. The liquid contact part is made of PTFE, and the fittings are flange type. The maximum operating pressure varies depending on the diameter and usage conditions, but it is 1.0 MPa. For gases (gas-phase fluids), the maximum operating pressure is lower, so please inquire each time. It cannot be used with flammable, combustible, or toxic gases. 【Specifications】 ■Manufactured diameters: 15A to 50A *Sizes other than those listed can also be manufactured, so please inquire. *For more details, please refer to the PDF document or feel free to contact us.
PTFE hoses are excellent in corrosion resistance, heat resistance, non-stick properties, pressure resistance, and flexibility, making them suitable for piping that conveys various fluids such as chemicals, steam, and oil.
The "PTFE Flexible Hose F-2 Liquid Contact Part PTFE" is a PTFE hose handled by Chūnichi Giken Kōgyō Co., Ltd. It features a deep corrugated design, providing excellent flexibility. The liquid contact part is made of PTFE, and the fittings are flange type. The maximum operating pressure varies depending on the diameter and usage conditions, but it is 1.0 MPa. For gases (gas-based fluids), the maximum operating pressure is lower, so please inquire each time. It cannot be used with flammable, combustible, or toxic gases. 【Specifications】 ■Manufactured diameters: 15A to 50A *Other sizes are also available upon request, so please contact us. *For more details, please refer to the PDF document or feel free to contact us.
Products with fluorine-based resin coating on the inside are also available! Blades can also be manufactured.
The "VG-VF Loose IWVF-4000" is a flexible hose available in sizes ranging from 20A to 300A. The standard specification features a loose type flange on the VF side and a fixed type flange on the VG side. It is also possible to manufacture both sides as loose type or both sides with VF flanges. Additionally, VG flanges can be produced. 【Features】 ■ Bladed versions can also be manufactured ■ Flexibility varies depending on the type of tube ■ Products with a fluoropolymer coating on the inner surface are also available *For more details, please download the PDF or feel free to contact us.
![[Data] Molded bellows and flexible hoses for vacuum use](https://image.mono.ipros.com/public/product/image/117010/IPROS8674449957175920303.png?w=280&h=280)
Compatible with various standards such as NW-KF and VG-VF! This is the product catalog for molded bellows and flexible hoses for vacuum use.
This document is a product catalog for molded bellows and vacuum flexible hoses that comply with various standards. It features a wide range of products tailored to different applications, including NW-KF, VG-VF, pipe ends, and ICF. Detailed descriptions of each product's standard specifications, structure, and dimensional tables are provided with illustrations, so please take a moment to read through it. [Contents (partial)] ■ NW-KF Flexible Hose ■ VG-VF Flexible Hose ■ VG-VF Loose Flexible Hose ■ Pipe End Flexible Hose ■ Pipe End Metal Seal Flexible Hose ■ NW-KF Molded Bellows *For more details, please download the PDF or feel free to contact us.
A universal pressure-resistant hose with excellent chemical and solvent resistance, non-extractive.
- The inner surface is made of fluororesin, so it is not affected by most solvents, including strong acids and strong alkalis. - It is a non-extractable hose, so it does not alter the inner fluid and maintains its purity. - It is a non-adhesive hose, which provides excellent pressure resistance. - It demonstrates strength even after repeated bending.
Hoses for water supply and drainage with excellent cold resistance, heat resistance, and chemical resistance.
Due to its excellent transparency, fluid inspection can be performed smoothly. It is lightweight and easy to use, and installation with fittings is also straightforward. Features: - The inclusion of vertical threads minimizes elongation under pressure. - There is no separation between layers. - The burst pressure is designed to be 4 to 5 times that of normal pressure. - In particular, the elongation in the case of temperature rise is less than half compared to other products.
I want just the amount of hose I need! In such cases, please contact our company.
We also have free samples of the Kan-Touch hose fittings, known for being "leak-proof, non-removable, and secure." Please take advantage of this opportunity!
Hydraulic hose
Our company offers hoses that are compatible not only with general-purpose hydraulic oil but also with water-glycol-based fluids and coolant oils. We also have a wealth of experience with heat-resistant ceramic-wrapped exteriors and SUS250K flanges. For more details, please contact us.
Plastic hose
There are many types of plastic hoses. Choosing a product that perfectly fits your needs from among them can be very difficult. But rest assured. We can offer a wide range of options, from those suitable for various fluids with flexibility, transparency, pressure resistance, vacuum resistance, and oil resistance, to those with color variations. We have a wealth of data backed by our long experience. Leave it to us. For more details, please contact us.
Same-day quotation available! We have a large inventory and can respond urgently due to in-house assembly. [Contact: 0545-57-5680]
Hydraulic hoses and high-pressure hoses. We can respond to ultra-short delivery times by handling various stock in-house assembly. Same-day pickup and shipping are available. For urgent breakdowns. Additionally, since we sell stock in smaller quantities, we can produce at a low cost. Please feel free to contact us. [Contact: 0545-57-5680]
You can select from various hose fittings, and the hose length can be easily installed at any desired length.
The multipurpose push-on rubber hose MP series is ozone resistant, and the core is made of smooth bore type Buna N. By using fiber reinforcement inside, the hose's operating pressure range is expanded, and it securely holds the end connection. The Buna N cover is abrasion resistant.
Rubber core synthetic fiber reinforced hose. Fittings can be supplied with specified lengths. Compatible with a wide variety of connection types. Rubber core compliant with EN16643:2016.
HAM-LET RHG rubber hose is designed for pneumatic and hydraulic applications, automotive industry, and air systems for stores. It is designed for general industrial maintenance. It can be used with HAM-LET fittings and is available with fittings installed to specified lengths. <Features> - Maximum working pressure: 300 PSI / 2 MPa - Operating temperature range: -40°C to +88°C - Inner layer rubber: Oil & heat-resistant synthetic rubber inner tube (RMA Class A compliant) - Outer layer rubber: Weather-resistant, abrasion-resistant, oil-resistant nitrile synthetic rubber cover (RMA Class B compliant) - Non-conductive (R > 1 MΩ/inch at 1000V DC) - Available colors: Black (standard), blue, red, green, gray, yellow - Compatible fittings: LET-LOK tube fittings, NPT threads, PT threads, parallel threads, SAE 37° flare fittings - Sizes: 1/4" to 1" - No silicone is used during hose manufacturing *For more details, please download the PDF or feel free to contact us.
