Last Updated： Aggregation Period:Nov 19, 2025～Dec 16, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 19, 2025～Dec 16, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 19, 2025～Dec 16, 2025
This ranking is based on the number of page views on our site.
976～990 item / All 1416 items
It is possible to install EPT rubber, silicone rubber, fluororesin shrink tubes, etc.
EPT rubber, silicone rubber, fluororesin shrink tubes, etc. can be installed in full or specified dimensions. For more details, please contact us or refer to the catalog.
A slim type with a glass blade placed over the blade hose and tightly fastened.
The "G type / Glass Blade Wrap" is a slim type where the glass blade is placed over the blade hose and crimped together. Cotton, nylon, and PP blades are also available. Hose bands are not required (up to 25A). For more details, please contact us or refer to the catalog.
Compact design with an SUS blade placed on top of a glass mold.
The "W-type/Sand Blade Wrap" is a compact design that features an SUS blade placed on top of a glass type. Hose bands are not required (up to 25A). For more details, please contact us or refer to the catalog.
Insulation materials are installed for the purpose of heat retention and as a measure to prevent condensation.
The "P type" is equipped with insulation materials for the purpose of heat retention and as a measure to prevent condensation. The color is black, and the material is EPDM. For more details, please contact us or refer to the catalog.
Nominal diameter 25A to 300A PTFE bellows
The "expansion joint" is made from modified PTFE (T-62), which has high corrosion resistance and does not deteriorate. It is also extremely flexible and boasts high reliability. Additionally, it has reduced elasticity to protect pressure-sensitive glass, graphite, and FRP equipment, improving cost efficiency. The bellows of the "R710 series" use PTFE. The flange is made of SCS13 (equivalent to SUS304), and the reinforcing ring is made of NITRONIC50. For more details, please contact us or refer to the catalog.
Nominal diameter 25A to 300A. PTFE bellows.
The "expansion joint" is made of molded modified PTFE (T-62), which has extremely high corrosion resistance and does not deteriorate. It is also highly flexible and boasts high reliability. Additionally, it has reduced elasticity to protect pressure-sensitive glass, graphite, and FRP equipment, improving cost efficiency. The bellows of the "R710 series" use PTFE. The flange is made of SCS13 (equivalent to SUS304), and the reinforcing ring is NITRONIC50. For more details, please contact us or refer to the catalog.
Nominal diameter 25A to 300A. PTFE bellows.
The "expansion joint" is made from modified PTFE (T-62), which has high corrosion resistance and does not deteriorate. It is also extremely flexible and boasts high reliability. Additionally, it has reduced elasticity to protect pressure-sensitive glass, graphite, and FRP devices, improving cost efficiency. The bellows of the "R710 series" use PTFE. The flange is made of SCS13 (equivalent to SUS304), and the reinforcement ring is made of NITRONIC50. For more details, please contact us or refer to the catalog.
Fluororesin hoses with various characteristics solve problems encountered in factories. They are hoses made using bellows-processed tubes, which are resistant to bending and vibrations.
This is a hose made from a fluororesin tube processed into a bellows shape, equipped with blades to provide pressure resistance. The lineup is diverse, including the general-purpose type R221, the lightweight R223 with PP blades, the R210 which intentionally has no blades, and the R250 which accommodates large diameters (up to 250A). It is also possible to respond to negative pressure by using spring protection or V sleeves in the valleys.
A rich lineup! Cleaning hoses that can be selected according to your needs.
The "Hairpin Hose / Orange Hose / Net Wire Hose" is a cleaning hose handled by our company. The "Orange Hose" is lightweight and has excellent flexibility due to its urethane exterior. The "Hairpin Hose" is also lightweight, easy to carry, and slim, making it easy to insert into pipes. You can choose from the three types according to your needs. 【Features (Hairpin Hose)】 - Lightweight and easy to carry, slim and easy to insert into pipes - Reusable fittings are also available *For more details, please refer to the PDF document or feel free to contact us.
Patent-acquired product! Usable for liquids classified as hazardous materials under the Fire Service Act appendix!
The "Fire Protect Rated Product" can be used for hazardous liquids specified in the Fire Service Act's appendix (excluding those that may affect fluororesin). It uses a PTFE-lined flexible hose on the inner surface. The exterior maintains airtightness with a stainless steel super annular omega tube. 【Features】 ■ Patent obtained: No. 4386488 ■ Certified by the Japan Fire Equipment Center (Performance Evaluation Number: 15-27-1) *For more details, please refer to the PDF document or feel free to contact us.
Using spiral-shaped PTFE hoses! Available in diameters from 65A to 100A!
The "Fire Protect Unrated Product" is a product that uses a PTFE liner flexible hose on the inside. The exterior maintains airtightness with a stainless steel super annular omega tube. The diameters range from 65A to 100A. Additionally, this product uses a spiral-shaped (Coloflon) PTFE hose. 【Performance Certification Application Consideration Product Specifications (Excerpt)】 ■ Type ・TF-FP65/TF-FP80/TF-FP100 ■ Diameter (A) (mm) ・65A/80A/100A ■ Diameter (B) (in) ・2 1/2B, 3B, 4B ■ Inner Diameter (mm) ・54/64/98 ■ Operating Pressure (MPa) ・1 *For more details, please refer to the PDF document or feel free to contact us.
Prevention of twisting and bending, improved resistance of hoses to pressure and vacuum!
"CORROLINE+" is designed and developed to incorporate all necessary conditions for chemical plants, particularly improving the required flexibility to provide a general-purpose chemical hose. It explores the patented PTFE hose flare design. The structure features a straight inner surface while the outer surface has a convolution, which generates excellent flexibility in conjunction with hoop strength. Additionally, the reinforcement with stainless steel spiral wire and stainless steel braid enhances resistance to twisting and kinking, improving the hose's resistance to pressure and vacuum. 【Features】 ■ Chemical resistance ■ Self-cleaning properties ■ Flexibility ■ Twisting resistance ■ Fire resistance *For more details, please refer to the PDF document or feel free to contact us.
The excellent chemical resistance of the PTFE liner and its resistance to cleaning and steam sterilization are easy!
"Pharmaline NandX" supplies excellent products that can be switched from silicone rubber hoses and tubes used in factories and laboratories in the pharmaceutical, biotech, and medical fields. "Pharmaline N" includes a SUS316 wire braid for enhanced strength and resistance to high internal pressure. "Pharmaline X" is a lightweight version designed for low-pressure use and does not include a braid. 【Features】 ■ Hygienic ■ Flexibility ■ Self-cleaning properties ■ Anti-kinking ■ Chemical resistance *For more details, please refer to the PDF document or feel free to contact us.
![[Information] NOYU Urban Greening System](https://image.mono.ipros.com/public/product/image/684/2000483233/IPROS57174548455355782229.png?w=280&h=280)
"Water" and "Green" are our themes. This is a document featuring irrigation systems tailored to Japan's climate.
This document introduces the irrigation system from Israel, which has a proven track record in urban greening, adapted by Noyou Co. as the Ramscape System to suit the Japanese climate. We provide a total system for the design, construction, and management of automatic irrigation systems. We offer a variety of products, including the "Ramscape Drip Hose," which has a diameter of 17mm and contains soil-colored pigments and UV protection agents, as well as "Ramscape Fittings" and "Woodpecker Drippers." [Contents (excerpt)] ■ Drip irrigation and fertilization system ■ Wall and rooftop drip irrigation systems ■ Examples of urban greening system design and construction ■ Pop-up sprinkler irrigation systems ■ Green mist systems, etc. *For more details, please refer to the PDF document or feel free to contact us.
It is possible to bend various resin hoses, eliminating intermediate joints and reducing costs!
Toho is a manufacturer of extrusion and profile extrusion products. "Extrusion" is, as the term suggests, a technology that "creates shapes by extruding." By utilizing extrusion technology, we produce products that can flexibly accommodate various genres. Hoses and tubes extruded from various resins can be bent. By processing to fix the hose and tube in a bent state, we have eliminated intermediate joints, resulting in cost reduction. This is expected to simplify piping and improve workability. *For more details, please download the catalog.
