We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for lift.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

lift×征侑 - List of Manufacturers, Suppliers, Companies and Products

lift Product List

1～7 item / All 7 items

Displayed results
2-post lift "HL-25-H/26KR"

2-post lift "HL-25-H/26KR"

Hesbon 2-Column Lift Series! Demonstrates great driving power while ensuring safety over the long term.

The "HL-25-H/26KR" is a standard model of a gantry lift used in various countries around the world. As the lift rises, the arm lock mechanism automatically activates to prevent the rotation of the arms, and it comes standard with auxiliary bases on both sides of the main posts, incorporating various safety features. Additionally, there is a wide range of detachable two-post lift adapters available that can accommodate a variety of vehicle types. 【Features of HL-25H】 ■ Adoption of a three-stage sliding arm - Achieves a minimum height of 126mm while being a base model - Demonstrates power in lifting low-floor vehicles ■ Base height set at 30mm - Minimizes the impact during vehicle passage *For more details, please refer to the PDF materials or feel free to contact us.

  • lift

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electric Hydraulic Mid-Rise Lift 'SML-263'

Electric Hydraulic Mid-Rise Lift 'SML-263'

Lifting capacity of 2500 kg! In addition to the safety valve for overload, it is equipped with a "temporary stop mechanism during descent."

The SML-263 is an electric hydraulic mid-rise lift equipped with two large-capacity hydraulic cylinders on a single table. With a minimum table height of 95mm, it is suitable for vehicles with a lower height. The synchronization of the left and right table heights is achieved through hydraulic and mechanical linkage, ensuring no height difference between the sides. It features a dead man control system that prevents the equipment from moving except during switch operation, stopping when the switch is released. 【Features】 ■ Lifting capacity of 2500kg ■ Equipped with a safety valve for overload (to prevent equipment damage due to overload) ■ Standard equipped with a hydraulic cut-off valve to prevent rapid descent in case of hydraulic circuit failure ■ Dead man control system that prevents the equipment from moving except during switch operation ■ Comes with four rubber blocks for jack points *For more details, please refer to the PDF document or feel free to contact us.

  • lift

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air Hydraulic Portable Mid-Rise Lift 'SML-265'

Air Hydraulic Portable Mid-Rise Lift 'SML-265'

Lifting capacity of 3000kg! It is useful for lateral movement within the factory and for changing direction on the spot.

The SML-265 is a mid-rise lift that allows for vehicle movement in all directions by loading the vehicle onto the lift and holding it with casters. It comes standard with a hydraulic cut-off valve to prevent rapid descent in the event of a hydraulic circuit failure, and features an automatic arm lock mechanism that locks the arm's swing during ascent. The table can rise to a maximum height of 970mm, making it suitable for work around the suspension. 【Features】 ■ Vehicle movement possible with casters ■ Table can rise to a maximum height of 970mm ■ Standard equipped with a hydraulic cut-off valve to prevent rapid descent in case of hydraulic circuit failure ■ Automatic arm lock mechanism that locks the arm's swing during ascent ■ Comes with four rubber blocks for jack points *For more details, please refer to the PDF document or feel free to contact us.

  • lift

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Low-rise portable lift "LR-60P"

Low-rise portable lift "LR-60P"

Recommended for tasks such as suspension, brake maintenance, and car wrapping!

The "LR-60P" is a low-rise portable lift with a lifting height of 600mm. The minimum height is 102mm, with a maximum load of 2700kg, and it comes with a rubber lift block and dolly. It can be used for various tasks such as sanding and painting around doors and bumpers, tire changes, body coating and polishing, as well as belt replacements for vehicles that require access from above and below. 【Specifications (partial)】 ■ Lifting height: 600mm ■ Minimum height: 102mm ■ Maximum load: 2700kg ■ Size ・Lift body: L2175×W1790×H102mm ・Mobile pump unit: L255×W270×H610mm *For more details, please refer to the PDF document or feel free to contact us.

  • lift

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Car lift "MX6"

Car lift "MX6"

New locking system (fall prevention device) adopted! It allows for effective use of space.

The "MX6" is a car lift that can be installed and used even with low ceiling heights, featuring a maximum column height of 2261mm during ascent. Thanks to its new mechanism, it allows for easy attachment and storage, effectively utilizing space. Additionally, the carriage arms have been reinforced, and a new locking system (fall prevention device) has been adopted. 【Features】 ■ Realizes a garage life ■ New mechanism (attachable and storable) ■ Genuine product ■ Capacity: 2,727kg ■ Can be installed and used even with low ceiling heights ■ Reinforced carriage arms *For more details, please refer to the PDF document or feel free to contact us.

  • lift

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Move Scissor Lift "MD-6XP"

Move Scissor Lift "MD-6XP"

It will be useful for tasks such as suspension maintenance, brake system servicing, and rear muffler replacement!

The "MD-6XP" is a moveable scissor lift with a maximum load of 2700kg. It has a lifting height of 1219mm and a minimum height of 121mm, and comes with three types of adapters. It can be used for various tasks such as sanding and painting around doors and bumpers, tire changes, body coating and polishing, as well as belt replacements for vehicles that require access from above and below. 【MD-6XP Specifications (partial)】 ■ Lifting height: 1219mm ■ Minimum height: 121mm ■ Maximum load: 2700kg ■ Size ・Lift body: L2057×W1016×H121mm ・Mobile pump unit: L350×W350×H1240mm *For more details, please refer to the PDF document or feel free to contact us.

  • lift

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bike lift "teco12"

Bike lift "teco12"

Many hiring achievements at a motorcycle specialty store! Approximately 10 cm wider than a standard bike lift for extra space.

The "teco12" is a bike lift with a maximum table height of 1200mm, designed for ease of use. It has a maximum capacity of 600kg, making it suitable for large motorcycles, and can accommodate American-style bikes and sidecars with optional features. It features an automatic ramp storage system and a safety speed control to prevent motorcycle tipping during lifting. Additionally, the main body is coated with a beautiful, durable baked-on finish for long-term use. 【Features】 ■ DUCATI designated bike lift ■ Widely adopted by specialty import motorcycle shops (BMW, Harley, DUCATI, etc.) ■ Maximum table height of 1200mm for ease of use ■ Maximum capacity of 600kg, suitable for large motorcycles ■ Can accommodate American-style bikes and sidecars with optional features *For more details, please refer to the PDF document or feel free to contact us.

  • lift

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to lift

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.