Last Updated： Aggregation Period:Sep 23, 2026～Oct 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 23, 2026～Oct 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 23, 2026～Oct 20, 2026
This ranking is based on the number of page views on our site.
151～180 item / All 269 items
We will customize according to the requirements and product specifications.
We propose permanent magnet products that meet your requirements. In terms of specifications such as magnetic characteristics or product drawings, we would like to provide the best proposal that comprehensively satisfies conditions such as 1: quantity, 2: delivery time, and 3: target price.
Improving productivity, reducing labor in tasks, and cutting costs! Achieving a safe and worker-friendly work environment.
The "Mag Switch Series" is a revolutionary magnetic tool that exhibits strong adhesion with powerful magnetic force when ON, and allows for easy and smooth disconnection when OFF. We offer a lineup that includes the "Welding Magnet Ground Clamp," which allows for easy grounding anywhere, as well as "Magnetic Angle Clamps" and "Lifting Magnets." 【Features】 ■ Compact, lightweight, and powerful adhesion ■ Sharp ON/OFF switching (international patent technology) ■ Strong adhesion even on thin plates ■ Easy operation, safe work, and clean without iron powder ■ Improved work efficiency and user-friendly for workers *For more details, please refer to the PDF materials or feel free to contact us.
We wind the magnets in-house.
The "Small-sized, Non-refrigerant Type Superconducting Magnet" can be used in vertical, horizontal, or any direction. Cooling time is within 12 hours, and excitation speed is about 10 minutes (up to 6 Tesla). Additionally, we also offer the "100V Air-cooled Non-refrigerant Type Superconducting Magnet System" that uses a 100V air-cooled compressor, so please feel free to consult us if you have any requests. 【Components】 ■ Superconducting Magnet ■ Cryostat ■ 1W/4KGM Refrigerator ■ Water-cooled Compressor (with GHe Hose) ■ Magnet Power Supply (Unipolar), etc. *For more details, please download the PDF or feel free to contact us.
We use magnets with a strength of over 12,000 gauss.
- We also accommodate the elevation of production equipment that occurs during magnet installation. - Magnetic force measurement of the magnets is also possible. - Customization is available according to customer needs, regardless of whether it is powder or fluid. - Safety measures to prevent accidents caused by magnets are also possible.
Easy maintenance! High magnetic force magnets for square lattice.
The high magnetic field square lattice magnet from Sangyo Supply is easy to clean. The dimensions can be referenced from the square lattice standards. 【Main Features】 ■ Easy to clean ■ Maximum surface magnetic flux density: 0.8 Tesla (8,000 Gauss) ■ Dimensions can be referenced from the square lattice standards
![[Magnet Installation Case] Resin Pellet Manufacturing Equipment Industry](https://image.mono.ipros.com/public/product/image/797/2000691254/IPROS31397531620252166003.png?w=280&h=280)
We have become able to remove metal foreign objects according to the specifications requested by the client!
We are engaged in the design and manufacturing of resin pellet production equipment, and we wanted to install a magnet with a surface magnetic flux density of over 10,000 gauss in the material input hopper. While searching on the internet, we found your company, and due to your good response, we decided to place an order. We installed a "magnet for rectangular hoppers" in the material input hopper and a "rectangular grid magnet" at the discharge outlet of the finished pellets. As a result, we were able to remove metal foreign objects according to the specifications requested by the client, thus meeting their needs. If you are a customer struggling with the removal of iron powder, iron pieces, or nails mixed in raw materials, please consult Sangyo Supply first. 【Installation Example】 ■ Client: Resin pellet manufacturing equipment company ■ Products Installed - Magnet for rectangular hoppers - Rectangular grid magnet *For more details, please refer to the related links or feel free to contact us.
![[Magnet Installation Case] Soda Ash Receiving and Storage Company](https://image.mono.ipros.com/public/product/image/ac4/2000691255/IPROS52753103232920016822.png?w=280&h=280)
We have installed a "corner lattice type magnet" to enable processing of 1 ton each time!
We have been entrusted with the task of receiving and storing soda ash, and we were requested to remove metal foreign objects using a magnet when loading onto the truck. As a result, we decided to install a square grid magnet at the discharge outlet of the hopper. We created space to install two tiers of square grid magnets at the outlet of the square hopper, added a door for opening and closing, and manufactured it anew to allow for maintenance. After completing the installation of the "square grid magnet," we enabled processing of one ton each time. As a result, we were able to remove the metal foreign objects requested by the client during loading onto the truck, thus fulfilling the client's request. If you are having trouble with the removal of iron powder, iron pieces, or nails mixed in with your raw materials, please consult Sangyo Supply first. 【Installation Example】 ■ Installation Site: Soda Ash Receiving and Storage Company ■ Installed Product: Square Grid Magnet *For more details, please refer to the related links or feel free to contact us.
![[Magnet Installation Case] Resin Pellet Manufacturer](https://image.mono.ipros.com/public/product/image/343/2000691256/IPROS19553313928895945689.png?w=280&h=280)
To be able to remove fine iron powder! The quality of the resin pellets has significantly improved.
In the production of resin pellets, there was a significant amount of iron powder mixed in from the start, and we were struggling to remove it with the conventional 3,000 Gauss magnets, which resulted in the quality of the resin pellets not improving. Therefore, we installed a "cylindrical hopper magnet" in the hopper. As a result, we were able to remove the fine iron powder that we had previously been unable to eliminate, and the quality of the resin pellets improved dramatically. If you are a customer facing issues with iron powder that is already mixed in at the raw material stage, please consult with Sangyo Supply first. 【Installation Example】 ■ Installation Site: Resin Pellet Manufacturer ■ Installed Product: Cylindrical Hopper Magnet *For more details, please refer to the related links or feel free to contact us.
![[Magnet Installation Case] Confectionery Manufacturing Line Equipment Manufacturer](https://image.mono.ipros.com/public/product/image/337/2000691260/IPROS00725672845529226002.png?w=280&h=280)
An example of installing a "single-stage magnet for rectangular hoppers" for food specifications (food-grade welding).
We were requested to install a hopper magnet for metal foreign object removal at the hopper section where raw materials are fed in, but we were having trouble finding a supplier for the magnet. The company that was introduced to us by the domestic rice cracker manufacturer was ours. We were contacted and installed a "square hopper magnet, single type" that meets food specifications (food-grade welding) at the raw material inlet. As a result, the confectionery manufacturer was very pleased. Subsequently, it was decided to transport the raw materials to the inlet via a conveyor, and we also installed a "square hopper magnet" at the previous inlet. If you are having trouble selecting a magnet to install on your production line, please consult Sangyo Supply first. 【Installation Example】 ■ Client: Confectionery manufacturing line equipment manufacturer ■ Products Installed - Square hopper magnet, single type - Square hopper magnet *For more details, please refer to the related links or feel free to contact us.
![[Magnet Installation Case] Confectionery Rice Milling Company](https://image.mono.ipros.com/public/product/image/e7e/2000691263/IPROS21617405212082673607.png?w=280&h=280)
Introducing a case where complaints from the candy manufacturer have decreased and production costs have been reduced.
When milling rice for confectionery, there was a significant amount of iron powder mixed in from the start, necessitating thorough removal of the iron powder. When we requested the installation of magnets from the equipment supplier, we faced difficulties because the number of magnets was low, and their ability to remove metal foreign substances was inadequate, yet they were expensive. We changed the milling process and designed and installed space for two "grid-type magnets, fixed at both ends, single stage" in the lower piping of the inlet hopper in the new equipment. We also installed a "magnet" at the outlet. The desired magnets were completed, and since the price was reasonable, it was a relief. Additionally, complaints from the confectionery manufacturer ceased, and production costs were reduced. [Installation Case] ■ Installation Site: Rice milling company for confectionery ■ Installed Products - Grid-type magnets, fixed at both ends, single stage (2 units) - Magnet *For more details, please refer to the related links or feel free to contact us.
It is a compact and high-performance lifting magnet that can be attached to heavy machinery such as hydraulic excavators.
【Features】 〇 Easy to install on hydraulic excavators, and with no vibration from the magnet, operators can handle scrap reliably and quickly! 〇 Special brackets are provided for installation, making it easy to attach and detach from the arm!
Featuring FLAIG products that can be used for a wide range of applications!
The FLAIG lifting magnet catalog introduces products that can be used for a wide range of applications. ■ Can be used for horizontal lifting and easily operated with a lever switch! Lifting Magnet ■ Easy ON/OFF switching by twisting! Hand Magnet ■ Fixes workpieces of all shapes! Magnet Clamp Block You can find products that meet the needs of the job site, so please download the catalog and check it out.
A swivel-type lifting system that allows the load to be switched between horizontal and vertical orientations
The FX-HVS is a horizontal-vertical system for lifting magnets that enables switching the load between horizontal and vertical orientations. Its swivel function allows the load to be rotated 90°, contributing to improved work efficiency and safety. A spring-type suspension system compensates for shifts in the center of gravity, ensuring stable material handling operations. 【Features】 ■Swivel mechanism that allows switching the load between horizontal and vertical orientations ■Supports flexible material handling operations with 90° rotation ■Features a spring-type suspension system ■Automatically compensates for shifts in the load’s center of gravity ■Swing-capable design ensures stable material handling ■Contributes to improved operational efficiency and safety ■Suitable for crane operations and transport processes ■Designed for attitude control of heavy loads
Automation-compatible lifting magnet that can be activated and deactivated pneumatically
The FX-Pneumatic is a lifting magnet equipped with pneumatic start and stop functions. It is ideal for integration with automation systems and pneumatic manipulators, enabling efficient workpiece handling. It comes standard with an emergency release function, ensuring safety while supporting continuous material handling operations. 【Features】 ■ Can be activated and deactivated pneumatically ■ Designed for use with pneumatic hoists ■ Compatible with automation systems ■ Ideal for use with pneumatic manipulators ■ Enables efficient handling of multiple workpieces ■ Equipped with an emergency release function as standard ■ Supports safe material handling operations ■ Streamlines the handling process for steel and iron workpieces ■ Compatible for integration into production lines and conveying equipment
Lifting Magnets for Safe Handling of Round Bars and Pipes
The FX-R is a lifting magnet designed for handling round materials such as round bars and pipes. Its special prism shape ensures stable gripping of round bars, enabling safe lifting operations. It is also compatible with flat steel, making it suitable for a wide range of applications. 【Features】 ■ Ideal for lifting round bars, pipes, shafts, and rods ■ Special prism shape enables safe positioning ■ Efficiently transmits magnetic force deep into the material ■ Compatible with a wide range of diameters ■ Smooth magnetic force switching with minimal recoil ■ Minimizes load displacement caused by twisting ■ Also compatible with flat steel materials such as thin plates ■ Protects the magnet core even when handling high-temperature workpieces ■ Permanent magnet type requiring no power source
A lifting magnet suitable for handling round steel
The FX-C is a lifting magnet designed for round loads such as rings, sleeves, bearing housings, and flange plates. Its circular, multi-pole clamping surface supports the lifting and handling of round steel materials. 【Features】 ■ Features a circular, multi-pole clamping surface ■ Supports lifting rings ■ Supports handling sleeves ■ Supports handling bearing housings ■ Supports lifting flange plates
Tank magnet
Easily removes iron-based (magnetically reactive) sludge from oil and coolant recirculated within the tank. 【Features】 Powerful magnets exert strong magnetic force on the top and sides. The bottom maintains a weaker magnetic force for securing to the tank. The effect is semi-permanent. The upper side is covered with stainless steel, and the bottom with soft steel. Epoxy resin is filled inside to protect the magnets. Easy to install and maintains effectiveness for a long time. 【Maintenance】 Clean as needed and optimize the installation position. 【Cautions for Use】 It has a very strong magnetic force. Please handle and install with care. Do not bring it close to powerful magnets or motors. Keep away from products affected by magnetic force, such as watches, computers, mobile phones, and medical devices like pacemakers. Do not place knives or sharp magnetic materials around this product. Do not use at temperatures above 100°C.
This is a magnet that can be used for experiments at school.
【Magnetic Fluid Observation Set】 The Magnetic Fluid Observation Set is an experimental kit that allows you to learn about magnetic fields in a fun way without getting your hands or clothes dirty. 【Teaching Magnets & Memo Holders】 Teaching magnets can be used for collecting iron filings or for experiments in schools. We offer various types, including rod-shaped magnets, magnet holders, and horseshoe magnets. The magnet holder is a powerful holder with a durable polyamide coating. There are also options with plastic caps. The horseshoe magnet, which has the basic properties of magnets, is an ideal teaching tool for magnet education. For more details, please contact us or refer to the catalog.
Rust-free silicone magnet (hole type / resin-coated)
The magnet has a hole in the center, allowing for screw fastening. Additionally, thanks to the use of powerful neodymium magnets, it can support heavy items such as signs, LEDs, lighting equipment, mirrors, and cameras. The magnet is coated with silicone resin, making it non-slip and preventing damage to the surface it adheres to. 【Features】 ■ Neodymium magnet ■ Full silicone resin coating ■ Rust-resistant even when wet ■ Thickness of silicone is 1.0mm ■ Patent No. 6475381 ■ Patent No. 7085720 For more details, please contact us or download the catalog.
Pursuing improved usability and safety! Demonstrating power in lifting workpieces in tight spaces and narrow suction surfaces!
The "LPR-VN Series" is a compact type of permanent lifting magnet that demonstrates its power in lifting workpieces in narrow spaces or with small contact surfaces. The handle operation angle is 60°, and it is patented. All models are compatible with steel plates and round steel, and they feature a double handle lock mechanism designed with safety in mind. We also offer larger types such as the "LPH Series" and the shape steel lifting type "LPR-VN+L Series." 【Features】 ■ Compact type ■ Handle operation angle of 60° ■ Suitable for lifting workpieces in narrow spaces or with small contact surfaces ■ Compatible with steel plates and round steel ■ Double handle lock mechanism *For more details, please refer to the PDF document or feel free to contact us.
You can attach doors, covers, tools, and accessories to the aluminum frame with magnets!
The "JPM-ND" is a magnet for aluminum frames. By lightly tightening the grab screw, the tip is pressed against the aluminum frame, preventing the magnet from moving vertically. Using nuts designed for aluminum frames can further prevent the movement of the magnet. 【Features】 ■ Allows doors, covers, tools, and accessories to be attached to aluminum frames with magnets. ■ Can be mounted at any position due to the plastic spring plate on the side. ■ The main body can be removed from the aluminum frame by loosening the grab screw and sliding it. *For more details, please download the PDF or feel free to contact us.
Standardizing three types of magnets! By covering the magnets with a metal holder, we enhance the adhesive force.
The "JDF/JDFS" is a flat plate holder type magnet with a female thread. Additionally, we offer the "JRM/JRF," a magnet with a holder covered by a rubber jacket, and the "JRB/JRN," which increases friction resistance with the adhered object due to the rubber jacket, preventing positional displacement in the sliding direction. Furthermore, we also have the "JSSF-ND," a cylindrical holder type magnet with a female thread. 【Features】 ■ Flat plate holder type magnet with a female thread ■ Increased adhesion strength by covering the magnet with a metal holder ■ Standardization of three types of magnets *For more details, please download the PDF or feel free to contact us.
It is highly safe because it adheres with a powerful permanent magnet! Even though it is compact and lightweight, it achieves a strong magnetic effect.
We would like to introduce the "Lifting Magnet" handled by Fujikawa Denko Co., Ltd. This product achieves high magnetic force effects even though it is compact and lightweight, and it does not require a power supply, eliminating issues such as power outages or distribution troubles. Additionally, the CPL-100/CPL-300 models are compatible with balance boards, allowing for the two-point suspension of large steel plates and long round steel bars using a balance board. 【Features】 - No power supply required, eliminating power outages or distribution troubles - High magnetic force effects achieved despite being compact and lightweight - High safety due to strong permanent magnets for adhesion - Compatible with both flat and round steel - CPL-100/CPL-300 models are compatible with balance boards *For more details, please download the PDF or feel free to contact us.
Introduction of OA tap-related products such as magnets that can be temporarily fixed to steel desks.
We would like to introduce our "Adapters/Magnets" that we handle. The "Adapter" converts the shape of the insertion port of already installed devices. Our adapter series offers a wide variety of 15A 125V options, allowing you to choose according to your needs. The "Magnet" can be attached to OA taps and other devices for temporary fixation to steel desks and similar surfaces. 【Lineup】 <Adapters> ■ KD0011 ■ KD0030 ■ K6002 <Magnets> ■ Z0204 ■ Z0206 ■ Z0353 *For more details, please refer to the PDF materials or feel free to contact us.
Ideal for applications requiring high-precision alignment and secure fixation in narrow spaces | Sensor Magnet
The M11P Series sensor magnet is housed in a sealed screw-type plastic casing designed for easy installation and adjustment. This magnet is designed to operate in combination with the MK11 Plastic series reed sensor (sold separately), forming a reliable proximity detection solution. Typically, the magnet is mounted on a movable surface, while the sensor is fixed, allowing for high-precision detection of position and movement. 【Features】 ■ Screw-type plastic housing: lightweight and easy to install and adjust ■ Compact size: total length 38.0 mm (1.496 inches) ■ Standard M8 x 1.25 screw: compatible with common mounting fixtures ■ Reliable magnetic operation: designed for use with MK11 Plastic Series reed sensors ■ Sealed structure: suitable for use in various environmental conditions *For more details, please download the PDF or feel free to contact us.
Assuming the sensor is mounted on the movable side and held on the fixed side, it accurately detects movement and position | Sensor Magnet
The M13 Series is a compact slot-mounted screw-type sensor magnet that achieves highly reliable proximity detection for industrial and commercial applications. It is designed to be used in combination with the MK13 Series reed sensors (sold separately), providing high precision and reproducible operation in systems that require consistent magnetic triggering. The slot-mounted installation holes allow for flexible position adjustment during installation, making it suitable for environments where alignment and mechanical stability are crucial. 【Features】 ■ Slot-mounted screw-fixed housing for adjustable and secure installation ■ Optimized for MK13 Series reed sensors ■ High-reliability proximity detection suitable for operation and position detection ■ Ideal for industrial automation, security systems, and OEM designs *For more details, please download the PDF or feel free to contact us.
Supports accurate detection of position or movement | Offers flexible mounting options
The M21P/1 Series is a product that houses a highly versatile sensor magnet in a robust housing, designed for reliable proximity detection in industrial and commercial applications. It offers two types of mounting configurations: horizontal slot screw holes (M21P/1) and vertical slot screw holes (M21P/2), providing flexible mounting options to accommodate various machine layouts. Designed with the assumption of being combined with MK21P, MK21M, and MK21PR Series reed sensors (sold separately), the M21P/1 magnet achieves high precision and reproducibility in operation. 【Features】 ■ Flexible and secure mounting supported by a housing with slot screws ■ Horizontal slot mounting holes ■ Optimized for MK21P, MK21M, and MK21PR Series reed sensors ■ High-reliability proximity sensing for operation and position detection ■ Suitable for industrial automation, security systems, and OEM designs *For more details, please download the PDF or feel free to contact us.
The magnet housing is available in both white and black colors | Sensor magnet.
The M36 Series is a small cylindrical embedded sensor magnet designed for installation in holes of ø3/8" or ø3/4" when using an adapter. When using an adapter, it is designed for press-fit installation to hold the magnet within the mounting hole using crush ribs. It is intended to be used in combination with the MK36 Series reed sensors (sold separately), providing high precision and reproducibility in systems that require stable magnetic triggering. 【Features】 ■ Screw-type press-fit housing for secure and flush mounting (diameter 10.7 x length 15.5mm) ■ Available in black or white housing ■ Optimized for MK36 Series reed sensors, or compatible with MK37 or MK38 ■ Highly reliable proximity detection for operation and position sensing ■ Suitable for industrial automation, small machinery, and OEM designs *For more details, please download the PDF or feel free to contact us.
A stable magnetic trigger is required for the system, achieving high precision and high reproducibility in operation | Sensor Magnet
The M38 Series is a compact cylindrical embedded sensor magnet designed for installation in holes of ø3/8" or ø3/4" when using an adapter. When using the adapter, it is designed for press-fit installation that holds the magnet in place within the mounting hole using a crash rib. It is designed with the assumption of being combined with the MK38 Series reed sensor (sold separately), achieving high precision and reproducibility in systems that require stable magnetic triggering. 【Features】 ■ Screw-in press-fit housing for secure and flush mounting (diameter 10.7 x length 31mm) ■ Available in black or white housing ■ Optimized for MK38 Series reed sensors, or can be combined with MK36 or MK37 ■ High-reliability proximity sensing for operation and position detection ■ Suitable for industrial automation, small machinery, and OEM designs *For more details, please download the PDF or feel free to contact us.
For correcting door rattling and warping. Available in the ideal size of 1mm width and 3mm back clearance.
It is often the case that existing code magnet sizes are not suitable for inspection opening sizes! Therefore, we have prepared magnets that are easy to use for inspection openings. ★POINT★ ● Perfectly fits the back edge of the inspection opening With a size of 12mm in width and 3mm in back edge, it is very user-friendly for inspection openings! ● Strong adhesion with anisotropic properties This anisotropic code magnet can also be used in cases where isotropic magnets do not provide sufficient adhesion. ● Easy size adjustment and installation It can be cut with scissors or a cutter, and it comes with double-sided tape on the back for easy installation. This product, with its small differences, is sure to please, so please give it a try. ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566
