pipe×ニッセイ機工 - メーカー・企業と製品の一覧

【Precision Welding Achievements】Titanium Sleeve for Cover (Thin-walled Pipe)

The board is roll-formed and then subjected to butt welding to create thin-walled pipes.

Size: TP340 (Pure Titanium Type 2) 0.50t x φ54 x 230L Application: Sleeve for Cover Features: The plate is roll-formed and then welded to create a thin-walled pipe. We can manufacture sizes that are not standard by cutting and roll-forming. Order Lot: 10 pieces Our welded pipes are made by cutting and roll-forming from sheet material using micro-plasma welding. Welding is performed without filler material, using a butt joint shape. The weld bead has minimal irregularities and distortion, achieving high precision and receiving positive feedback. Features: - Can be manufactured in a thickness range of 0.05 mm to 1.0 mm. - We can accommodate production from just one piece. - In addition to stainless steel, we can also manufacture using special materials such as titanium, Hastelloy, Inconel, and nickel. - Production and shipping can be done in as little as two business days. - All manufacturing is done in-house. We can produce prototypes, development products, and custom items according to application and required quantity. For the sizes of welded pipes, please refer to the special page → Catalog List → Quick Reference Table for Welded Pipe Manufacturing Range. (Note: The formability of titanium differs from that of stainless steel. Please use this as a guideline and contact us for details.)

企業：ニッセイ機工
価格：Other

Pipe Fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Precision Welding Achievements] Titanium Gas-tight Structural Container (Pipe + Pipe Butt Welding)

The lathe-processed parts are welded together in series to form a pressure-tight container.

Size: 6-4Ti 3.0t + 3.0t butt welding Application: Airtight structural container Features: The lathe-processed parts are butt-welded in series to create an airtight container. The interior is machined in sections, allowing for cost reduction through welding. Order history lot: 1 piece Our welded pipes are produced by cutting and roll forming from sheet material using micro-plasma welding methods. Welding is performed without using filler material, in a butt joint configuration. The weld bead has minimal irregularities and distortion, achieving high precision and receiving positive feedback. Features: - Can be manufactured with a plate thickness range of 0.05 mm to 1.0 mm. - Production can be accommodated from just one piece. - In addition to stainless steel, production using special materials such as titanium, Hastelloy, Inconel, and nickel is also possible. - Production and shipping can be done in as little as two business days. - All manufacturing is done in-house. Prototypes, development products, and custom items can be produced according to application and required quantity. For the sizes of welded pipes, please refer to the special page → catalog list → quick reference table for the range of welded pipe manufacturing. (Note: For titanium, the formability differs from that of stainless steel. Please use this as a guideline and contact us for details.)

企業：ニッセイ機工
価格：Other

Pipe Fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Precision Welding Achievements] Titanium Bellows Tube (Plate-Wound Welded Pipe)

We can produce custom sizes that are not specified in the standards with the specified inner diameter, outer diameter, and length using butt welding.

Size: TP340 0.30txφ200x500L (both ends melted) Application: Bellows and similar products Features: We can produce custom sizes not specified in the standards with your specified inner diameter, outer diameter, and length through butt welding. It is characterized by being resistant to cracking of the weld bead even after forming processes like bellows (welding conditions are determined after confirming forming conditions). Order lot: 10 pieces Our welded pipes are made by cutting and roll forming from sheet material and using the micro-plasma welding method. Welding is performed without filler material in a butt joint shape. The weld bead has minimal unevenness and distortion, achieving high precision and receiving positive feedback. Features: - Can be produced in a thickness range of 0.05 mm to 1.0 mm. - Production can be accommodated from just one piece. - Production is possible not only in stainless steel but also in special materials such as titanium, Hastelloy, Inconel, and nickel. - Production and shipping can be done in as little as two days. - All manufacturing is done in-house. We produce prototypes, development products, and custom items according to application and required quantity. For the sizes of welded pipes, please refer to the special page → catalog list → quick reference table for the range of welded pipe manufacturing.

企業：ニッセイ機工
価格：Other

Pipe Fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Precision Welding Achievements] Titanium Liquid Level Gauge Float (Pipe + Cap Corner Welding)

A ring-shaped cover is placed on the end face of the thin-walled pipe and the ends are welded at the corners.

Size: TP340 0.20t (tube), 0.50t (cap) outer diameter φ23 Usage: Liquid level gauge float Features: A ring-shaped cap is placed on the thin-walled tube end and welded at the end. It is also possible to change the ring shape to a disc for a sealed shape. (The tube in the photo is a commercially available product and is not manufactured by our company.) Order lot for achievements: 20 pieces Our welded pipes are made by cutting and roll forming from sheet material, using micro-plasma welding methods. Welding is performed without filler material, using a butt joint shape. The beads have small irregularities and distortions, and we have received high praise for their precision. Features: - Can be manufactured in a thickness range of 0.05 mm to 1.0 mm. - Production can be accommodated from just one piece. - Not limited to stainless steel, we can also manufacture using special materials such as titanium, Hastelloy, Inconel, and nickel. - Production and shipping can be done in as little as two business days. - All manufacturing is done in-house. We will produce prototypes, development products, and custom items according to usage and required quantities. For the sizes of welded pipes, please refer to the special page → Catalog list → Quick reference table for the range of welded pipe manufacturing capabilities.

企業：ニッセイ機工
価格：Other

Pipe Fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

【Precision Welding Achievements】Titanium Thin-Walled Titanium Pipe

It will be manufactured by cutting the thin plate, rolling processing (3-roll processing), and butt welding.

We manufacture welded pipes using titanium thin plates of less than 1 millimeter, which are used for bellows, heat exchanger shells, floats, and more. The thin plates are processed through cutting, rolling (3-roll processing), and butt welding. A notable feature is our ability to produce sizes that are not available in standard commercial specifications, in increments of 0.10 millimeters. We also perform assembly processing for welded pipes, including the installation of flanges, lids, and end rings, as well as assembly with other components. We conduct airtightness tests using He leak tests. Our products are well-received for their high precision, with minimal bead irregularities and distortions. Features: - We can manufacture within a thickness range of 0.05 millimeters to 1.0 millimeters. - We can accommodate production starting from just one piece. - In addition to stainless steel, we can also manufacture using special materials such as titanium, Hastelloy, Inconel, and nickel. - We can ship within the shortest time frame of two business days. - All manufacturing is done in-house. We produce prototypes, development items, and custom products according to the application and required quantity. For the sizes of welded pipes, please refer to the special page → catalog list → quick reference table for the range of welded pipe manufacturing.

企業：ニッセイ機工
価格：Other

Pipe Fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Foil - Ultra-thin sheet welding pipe

We accept custom orders for welded pipes made of stainless steel, titanium, and nickel alloys in non-standard sizes, with thicknesses ranging from 0.05 mm to 1.0 mm, starting from just one piece.

Our welded pipes are made by cutting and roll forming from sheet material, using the microplasma welding method. We perform welding without filler material, using a butt joint shape. The beads have minimal unevenness and distortion, achieving high precision and receiving positive feedback. Features: - We can manufacture within a thickness range of 0.05 mm to 1.0 mm. - We can accommodate production starting from just one piece. - In addition to stainless steel, we can also manufacture using special materials such as titanium, Hastelloy, Inconel, and nickel. - We can produce and ship in as little as two business days. - All production is done in-house. Applications: - We can accommodate vacuum products through helium leak testing and precision cleaning. - We manufacture welded pipes for vacuum insulation containers, crucibles, floats, prototypes, development items, and custom products according to the application and required quantity.

企業：ニッセイ機工
価格：Other

Pipe Fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Precision Welding Processing Results: Pure Titanium Cover t0.2 + t0.5

We are performing corner welding of a t0.5 titanium ring to a t0.2 titanium pipe.

Specifications: Pure titanium seamless pipe t0.2 x φ23 + TP340 t0.5 ring, corner welding Application: Cover Features: The t0.2 titanium pipe is corner welded with a t0.5 titanium ring. It has been manufactured as a cover for fitting. Quantity: 40 pieces Our welded pipes are produced by cutting and roll forming from sheet material, using micro-plasma welding methods. Welding is performed without filler material, using a butt joint shape. The weld bead has minimal irregularities and distortion, achieving high precision and receiving favorable reviews. Features: - Can be manufactured in thicknesses ranging from 0.05 mm to 1.0 mm. - Production can be accommodated from a single piece. - Not limited to stainless steel, we can also manufacture using special materials such as titanium, Hastelloy, Inconel, and nickel. - Production and shipping can be done in as little as two business days. - All manufacturing is done in-house. Applications: - Can accommodate helium leak tests and precision cleaning for vacuum products. - Welded pipes can be used for vacuum insulation containers, crucibles, floats, and can be produced according to application and required quantity for prototypes, development items, and custom orders. (Note: The formability of titanium differs from that of stainless steel. Please refer to this as a guideline and contact us for details.)

企業：ニッセイ機工
価格：Other

Pipe Fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Precision Welding Achievements] Welding Pipe for Titanium Sheet Thickness 1.5mm Formed Bellows

We manufactured a welded pipe for forming bellows with a thickness of 1.5mm.

Specifications: TP340 t1.5 x IDφ1080 x 900L butt-welded Application: Pipe for bellows seamless tubes Features: We have manufactured a welded pipe for forming bellows with a thickness of 1.5mm. This is the thickest plate we produce for titanium welded pipes. Since the unfolded size is nearly 3400mm, we accommodated it with two welding points. We also support butt welding with two or more points. Quantity: 1 piece Our welded pipes are made by cutting and roll forming from sheet material, using micro-plasma welding methods. Welding is performed in a butt joint shape without using filler material. The weld bead has minimal unevenness and distortion, achieving high precision and receiving positive feedback. Features: - Can be manufactured in a thickness range of 0.05mm to 1.0mm. - Production is available from just one piece. - Not limited to titanium, we can also manufacture using special materials such as SUS, Hastelloy, Inconel, and nickel. - Production and shipping can be done in as little as two business days. - All manufacturing is done in-house. We produce prototypes, development products, and custom items according to application and required quantity. For sizes of welded pipes, please refer to the special page → Catalog list → Quick reference table for the range of welded pipe manufacturing.

企業：ニッセイ機工
価格：Other

Pipe Fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

pipe×ニッセイ機工 - メーカー・企業と製品の一覧

pipeの製品一覧

【Precision Welding Achievements】Titanium Sleeve for Cover (Thin-walled Pipe)

[Precision Welding Achievements] Titanium Gas-tight Structural Container (Pipe + Pipe Butt Welding)

[Precision Welding Achievements] Titanium Bellows Tube (Plate-Wound Welded Pipe)

[Precision Welding Achievements] Titanium Liquid Level Gauge Float (Pipe + Cap Corner Welding)

【Precision Welding Achievements】Titanium Thin-Walled Titanium Pipe

Foil - Ultra-thin sheet welding pipe

Precision Welding Processing Results: Pure Titanium Cover t0.2 + t0.5

[Precision Welding Achievements] Welding Pipe for Titanium Sheet Thickness 1.5mm Formed Bellows

pipeに関連する検索キーワード