powder Product List and Ranking from 164 Manufacturers, Suppliers and Companies

Tohoku University Technology: Co-based Alloy Powder: T13-172

Providing alloy powder suitable for 3D additive manufacturing while maintaining the various properties of Co-Cr-Mo alloys.

Co-based alloys such as Co-Cr-Mo alloys are excellent in corrosion resistance and wear resistance, and are widely used in various applications including biomaterials, casting mold materials, and dental casting materials. Furthermore, by using Co-Cr-Mo alloy powder with superior corrosion and wear resistance, it is possible to manufacture implant components with complex shapes. However, Co-Cr-Mo alloys have the challenge of being less hard than iron-based alloys, making them unsuitable for general industrial applications. This invention enables the provision of a hard Co-based alloy powder that maintains corrosion and wear resistance. The invention is characterized by being based on Co-Cr-Mo-N alloys with the addition of C. When this powder is used for additive manufacturing, a process of rapid heating, melting, and rapid cooling of the powder results in a laminate with superior properties beyond conventional Co-based alloys, thereby opening up applications for Co-based alloys in industrial products.

Company：Tohoku Techno Arch Co., Ltd.
Price：Other

others
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tohoku University Technology: Rare-earth free ferromagnetic particle powder showing BHmaxabove 6 MGOe: T19-390_T19-706_T19-709

Realization of α"-Fe16N2particle powder with giant saturation magnetization

The international market price of neodymium has increased significantly in recent years. The reason seems to be the increasing demand for windpower generation and electric vehicle motor in China where the country is promoting decarbonization as a national policy. In addition, the perspective of economic security is discussed in Japan and there is a strong demand for magnetic material which does not contain rare earth. Low cost Fe-N magnetic material consisting only of iron and nitrogen has especially high expectation. In particular, α"-Fe16N2 which has BCT structure and predicted to have high magnetic saturation, has attracted much attention. 　However, α"-Fe16N2 is a metastable compound that crystallizes when Fe-N compound is annealed, and there is almost no report of its isolation as a bulk material. The only few reported cases mention about eutectic crystal of α"-Fe16N2 and stable phase, or the existence for only 10 days at 100°C, so there is no example of α"-Fe16N2 single phase stable isolation as a bulk. 　This invention is about the α"-Fe16N2 stable isolated powder. This magnetic powder shows a BHmax of more than 6 MGOe (48 kJ/m3), which is higher than ferrite and alnico. It also shows the saturation magnetization of 221 emu/g which exceeds metallic Fe, and the coercivity of more than 2 kOe (160 kA/m) which is higher than alnico and comparable to ferrite. Since this magnetic powder can produce magnet that outperforms ferrite and alnico without using rare earth, it is expected to be used in motor, etc. as an alternative to neodymium magnet which continues to rise in price.

Company：Tohoku Techno Arch Co., Ltd.
Price：Other

others
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

YRD20 (Mesh for Metal Bond - Crushing)

Green, block-shaped, with intermediate brittleness and good self-sharpening properties.

Features: It has a yellow semi-blocky shape and possesses medium to low crushing properties. When impacted, fragments peel off from each abrasive grain, allowing new edges to regenerate. Applications: Suitable for processing hard materials such as tungsten and PCD. Sizes: 50/60~500/600 Mesh: 60/80-400/500

Company：鄭州多磨超硬材料有限公司(ZZDM SUPERABRASIVES CO.,LTD)
Price：Other

Diamond cutter
Grindstone
Other abrasives
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Seria nano-particle powder

For exhaust gas purification, photocatalysts, fuel cells, etc.! Cube-shaped organic modified particles and unmodified particles.

We would like to introduce our "Cerium Nanoparticle Powder" developed using our supercritical technology. The particle size is about 10 nm, and there are both organically modified and unmodified particles. The organically modified ones are cube-shaped, and the modifier is alkyl carboxylic acid (mainly with 6 carbon atoms), which improves the compatibility with hydrophobic resins. Additionally, the unmodified ceria is obtained by removing the modifier from the organically modified ceria, exposing the ceria surface. 【Features】 ■ Particle size is about 10 nm, with both organically modified and unmodified particles ■ Organically modified - Cube-shaped - Improved compatibility with hydrophobic resins ■ Unmodified - Obtained by removing the modifier from organically modified ceria - The ceria surface is exposed *For more details, please refer to the PDF document or feel free to contact us.

Company：アイテック
Price：Other

Other polymer materials
others
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AIRYTECH Grinding Powder LCD Type

Liquid crystal type

High quality, uniform crystal grains, good texture, resistant to scratches, stable quality, good suspendability.

Company：愛鋭精密科技（大連）有限公司（AIRY TECHNOLOGY CO., LTD.) 中国大連本社
Price：Less than 10,000 yen

Other abrasives
powder

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AIRYTECH Grinding Powder Cover Plates

Cover plates and similar items

Fast grinding speed, high yield, uniform crystal grains, resistant to scratches, easy to clean.

Company：愛鋭精密科技（大連）有限公司（AIRY TECHNOLOGY CO., LTD.) 中国大連本社
Price：Less than 10,000 yen

Other abrasives
powder

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Phenolic resin-coated carbon fiber "CFPS series"

It is a material in which carbon fibers are coated and granulated with phenolic resin using a special method.

The "CFPS series" is made by processing high-performance carbon fiber powder and phenolic resin in a special way to create a powdered form. By performing hot press molding, it can be shaped into any desired form, allowing for the easy production of products with excellent heat resistance and durability. Additionally, being granular, it has good flowability and dispersibility, making it easy to mix with various materials. 【Features】 ○ Easily insoluble and non-fusible through hot press molding ○ Capable of molding into any shape For more details, please contact us or download the catalog.

Company：リグナイト
Price：Other

fiber
Composite Materials
Other polymer materials
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-oxidized spherical powder

All soluble metals and alloy materials can be manufactured! Non-oxidized metal spherical powder.

"Non-Oxidized Spherical Powder" is an ideal spherical powder manufactured by applying the principles of the SPACE LABO method. Due to its non-oxidized nature, it does not produce product defects caused by materials, ensuring high-quality material supply. In automatic feeding processes such as welding and thermal spraying, its spherical shape allows for smooth supply. Additionally, it has excellent machinability and weldability, and its beautiful finish allows for the omission of secondary processing. [Features] ■ Manufactured by applying the principles of the SPACE LABO method ■ No product defects caused by materials ■ Excellent machinability and weldability ■ Beautiful finish allows for the omission of secondary processing ■ All meltable metals and alloy materials can be produced *For more details, please refer to the PDF document or feel free to contact us.

Company：トーヨーメタル
Price：Other

Other metal materials
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PBF manufacturing method | Powder material "PPS powder"

Super engineering plastics with high melting points 3D printing AM (Additive Manufacturing)

"PPS powder" (polyphenylene sulfide) is a high melting point super engineering plastic. 【Properties】 ■ Melting point: 280℃ ■ Flame retardant material *Please feel free to contact us for more details about the powdered material.

Company：二幸技研新規事業課
Price：Other

Other polymer materials
Engineering Plastics
Composite Materials
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PBF manufacturing method | Powder material "Nylon 12 Powder"

With excellent surface roughness, high airtightness, and fine detail, suitable for design and functional evaluation models. 3D printing AM (Additive Manufacturing).

"Nylon 12 powder" has excellent surface roughness, high airtightness, and fineness, making it an ideal powder material for design and functional evaluation models. 【Characteristics】 ■ Excellent surface roughness ■ High airtightness ■ Fineness ■ Ideal for design and functional evaluation models *Please feel free to contact us for more details about the powder material.

Company：二幸技研新規事業課
Price：Other

Other polymer materials
Engineering Plastics
Composite Materials
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High surface area graphene powder "Graphelite(R) 1000"

Inexpensive and high-quality graphene 'Graphelite(R)1000' Specific surface area: Specific surface area (BET) 640~710 square meters/g

Affordable prices suitable for companies and university laboratories. Packaging: 1 liter: 3 grams to 5 grams. The world's lightest. Produced using PLC control. Preparation for manufacturing graphene oxide solution is also underway. *For more details, please refer to the PDF document or feel free to contact us.*

Company：バークス環境
Price：Other

others
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PC resin powder material "Polyca-3D Powder" *Free sample provided

For the examination of materials for 3D modeling. Excellent impact resistance and high heat resistance.

"Polyca-3D Powder" is a powdered material made from polycarbonate resin that has been uniquely sourced and crushed and classified in a clean environment. It possesses excellent impact resistance, heat resistance, weather resistance, and electrical insulation, making it a material that expands possibilities for new product development, including 3D modeling. Currently, we are offering product samples free of charge. If you are interested, please feel free to contact us through the [Contact Form]. [Features] ■ Available in various grades to suit different applications ■ Can also be used as raw material for compounds and composite material development ■ Capable of contract development tailored to your needs *For more details, please refer to the materials. Feel free to reach out with any inquiries.

Company：マテリス
Price：Less than 10,000 yen

Engineering Plastics
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Technical Data: Polyca-3D Powder

New technology! Introducing a new material for product development: Polyca-3D powder.

"Polyca-3D Powder" is a fine powder made from PC resin (polycarbonate resin) that Materis Co., Ltd. has uniquely sourced and processed through crushing and classification in a clean environment. This document includes an overview and characteristics of "Polyca-3D Powder," as well as basic physical property tables. [Contents] ■ What is Polyca-3D Powder? ■ Characteristics of Polyca-3D Powder ■ Precautions for Use *For more details, please refer to the catalog or feel free to contact us.

Company：マテリス
Price：Other

plastic
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Copper oxide agent

Ideal for electroplating and electroless plating.

Copper oxide for plating (SS-CuO) is a powdered product used for replenishing copper ions in various copper plating solutions, making it ideal not only for electroplating but also for electroless plating. It is easy to work with and allows for very convenient management of the plating process. There is no increase in FREE Acid, enabling the maintenance of a stable plating bath. 【Features】 ■ High-purity functional copper oxide fine powder ■ Low residual chlorine content and excellent acid solubility ■ Achieves optimal effects for electro copper plating ■ Excellent powder flowability with an angle of repose below 35º For more details, please refer to the catalog or feel free to contact us.

Company：ラットコーポレーション本社：営業部・業務部
Price：Other

Non-ferrous metals
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Increase the yield of thermal spraying with 'Thermal Spray Powder SURPREX'

Production of thermal spray powders adjusted to the desired granularity! Achieving high adhesion efficiency while avoiding issues such as spitting. *Free explanatory materials on thermal spray powders.

The thermal spray powder "SURPREX" is produced by granulating multiple fine powders into a shape close to that of pearls, followed by sintering and then adjusting the particle size. As a result, it achieves a higher adhesion efficiency (thermal spray yield) and excellent fluidity compared to powders manufactured by conventional sintering-grinding or melting-grinding methods. 【Selectable Points】 ■ Fewer troubles such as spitting ■ Higher adhesion efficiency than powders produced by conventional sintering methods ■ Capability to produce thermal spray materials from composite reaction products ■ Capability to produce thermal spray powders with adjusted particle size *For more details, please refer to the PDF document or feel free to contact us.

Company：フジミインコーポレーテッド
Price：Other

others
Plasma surface treatment equipment
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Introduction of research project results on ultra-hard alloy powder for 3D additive manufacturing.

[Case Study of 3D Printer Development Initiatives] Introducing the achievement of producing ultra-hard punches with internal piping, with over 100,000 shots in actual use.

In the "Knowledge Base Aichi Key Research Project" implemented by Aichi Prefecture and the Public Interest Incorporated Foundation Science and Technology Exchange Foundation, a research group consisting of Professor Makoto Kobashi from Nagoya University, Asahi Seiki Kogyo Co., Ltd., Aichi Industrial Science and Technology Comprehensive Center, and our company has successfully developed a mold for cemented carbide with internal structures using a 3D printer. We are currently fabricating cemented carbide punches with internal piping using a 3D printer, and for verification, we are using the actual fabricated cemented carbide punches in deep drawing processing. We have confirmed that there are no abnormalities in both the workpiece and the punch even after 100,000 shots, and further verification with an increased number of shots is planned for the future. Our company has developed powders with properties suitable for metal 3D printers (Powder Bed Fusion: PBF) necessary for fabricating using cemented carbide powders. The manufacturing and sales of these 3D printer-compatible cemented carbide powders have already begun. The cemented carbide punch shown in the image was fabricated by Japan Layered Manufacturing Co., Ltd.

Company：フジミインコーポレーテッド
Price：Other

Press Dies
End Mills
Processing Jig
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Technical Data] Case Study on Carbide × 3D Printer (LPBF Method)

This is a technical document summarizing the characteristics of cemented carbide understood from the basics, general powder metallurgy methods, challenges and causes of layered manufacturing of cemented carbide, as well as countermeasures and case studies!

Opening up new possibilities with carbide × LPBF! Our company has evolved the 3D printing technology for carbide powder, enabling high-precision and high-strength fabrication that was previously difficult. In this series (a total of 5 sessions), we will systematically explain the characteristics of carbide, fabrication technology, and approaches to solving challenges. If you are interested in more innovative material solutions, please take a look. Session 1: An introduction to the characteristics of carbide and the manufacturing process using conventional powder metallurgy methods, as well as 3D printers (LPBF method) for beginners. Session 2: In the LPBF method using carbide, the formability is poor, and pores and cracks have been observed in the fabricated objects; we will delve into these challenges and their causes. Session 3: We will consider how the heat treatment conditions after fabrication affect the fabricated products. Session 4: As a confirmation of the effect of carbon content on reducing brittle phases in layered fabrication (LPBF method) of carbide, we will examine the impact of adding graphite particles to carbide powder. Session 5: We will introduce case studies of 3D carbide fabricated products applied to deep-drawing press molds used in automotive parts manufacturing.

Company：フジミインコーポレーテッド
Price：Other

Composite Materials
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Benetron (Ruhma leaf extract)

Functional food support! When it comes to sleep improvement ingredients, it's Tokiwa's Benetron.

Benetron is an extract powder made from the leaves of Apocynum venetum, which has obtained various evidence, including sleep improvement, through our unique clinical trials and animal studies. It is an original ingredient from Tokiwa that is currently attracting attention as a plant-derived sleep improvement material, with many acceptance records as a functional food. ◆ Source Plant Apocynum venetum L. Family: Apocynaceae ◆ Standard Components Hyperoside, Isoquercitrin ◆ Form Extract powder ◆ Corresponding Category Food (compatible with functional food labeling) ◆ Example of Functional Food Notification Label This product contains hyperoside and isoquercitrin derived from Apocynum. It has been reported that hyperoside and isoquercitrin derived from Apocynum can help improve sleep quality (depth of sleep and satisfaction with sleep upon waking). ◆ Abundant Evidence Effects on sleep improvement, attention support, stress relief, improvement of depressive symptoms, improvement of PMS and menopausal symptoms, etc. ◆ Certification Manufactured at our factory, which has obtained JIHFS health food raw material GMP and Codex standard HACCP certification.

Company：常磐植物化学研究所本社
Price：Other

Organic Natural Materials
powder

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Bilberry (bilberry extract)

Functional display food compatible! When it comes to eye care ingredients, it's Tokiwa's bilberry.

Bilberon is an extract powder derived from bilberry fruit, and we have obtained various evidence, including eye care claims, through our unique clinical trials. It has also gained attention for its numerous acceptance records as a functional food product. ◆ Source Plant Bilberry (Vaccinium myrtillus L.) Family: Ericaceae ◆ Standard Components Anthocyanins ◆ Properties Extract powder ◆ Corresponding Category Food (compatible with functional food labeling) ◆ Examples of Functional Food Labeling Notifications (1) Bilberry-derived anthocyanins have been reported to support focusing ability, alleviate eye fatigue, and reduce temporary neck and shoulder strain caused by eye use. (2) Bilberry-derived anthocyanins have been reported to support focusing ability and provide moisture to the eyes, which is often lacking during VDT work (monitor work such as computers and smartphones), alleviating eye fatigue. ◆ Certification Manufactured in our own factory, which has obtained JIHFS health food raw material GMP and Codex standard HACCP certification.

Company：常磐植物化学研究所本社
Price：Other

Organic Natural Materials
powder

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-repellent titanium oxide nylon composite powder "Hybrid Power"

"Microplastic alternative" retains UV shielding effects while improving usability and dispersibility.

The "Water-repellent Titanium Dioxide-Nylon Composite Powder" retains UV shielding effects and improves usability and dispersibility. 【Water-repellent Titanium Dioxide MTXO70-NL】 ≪Features≫ ■ Inorganic UV filter with high UVB and UVA protection ■ Excellent usability by combining with nylon powder ■ Easily dispersible in other cosmetic bases ■ Blue light effect ■ USP standard 【Water-repellent Ultrafine Titanium Dioxide FTO60-NL】 ≪Features≫ ■ Transparency (natural makeup material) ■ UV shielding (cuts UVB waves) ■ Minimal color unevenness ■ Excellent usability ■ Easily dispersible in other cosmetic bases ■ USP standard 【Water-repellent Ultrafine Zinc Oxide FZO60-NL】 ≪Features≫ ■ Transparency (natural makeup material) ■ UV shielding (cuts UVB waves) ■ Minimal color unevenness ■ Excellent usability ■ Easily dispersible in other cosmetic bases ■ Transparency (natural makeup material) *For more details, please refer to the catalog or feel free to contact us.

Company：島貿易
Price：Other

Other medical supplies and cosmetic manufacturing materials
Other contract services
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluororesin powder "HMP Series"

Micronizing high polymer PTFE as is! A powder with excellent thermal stability and lubricity.

The "HMP Series" is a flake-shaped additive powder made by finely grinding high molecular weight PTFE, which exhibits excellent thermal stability and lubricity. By directly grinding the scrap PTFE generated during the processing stage, it utilizes many of the properties of PTFE, such as outstanding thermal stability, heat resistance, lubricity, water repellency, oil resistance, non-stick properties, chemical resistance, and electrical characteristics, in its powdered form. The powder is flake-shaped with a smooth texture, and due to the extremely low amount of fluorine-based leachable ions, it is highly safe and effective for use as an additive in cosmetics. 【Features】 ■ Finely ground unirradiated PTFE in its polymer form ■ Flake-shaped with a smooth texture ■ Extremely low amount of fluorine-based leachable ions ■ Powdered from scrap generated during processing ■ Comparable to virgin PTFE *For more details, please refer to the catalog or feel free to contact us.

Company：エムテック化学川口事務所・試験室
Price：Other

Cosmetic materials and raw materials
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ume fruit juice powder

This is a product made by spray-drying ume 5 times concentrated juice into a powder. It is suitable for cases where liquid ingredients cannot be used.

This product is a spray-dried juice made from Nanko plums produced in Wakayama Prefecture, with a fivefold concentration. It is mixed with dextrin in a 1:1 ratio. It is recommended for products that primarily need to be in powder form.

Company：中野BC
Price：Other

Powder Molding Machine
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Jabara powder

The jabara, which began cultivation in Kitayama Village, Wakayama Prefecture, the only exclave in Japan. This is a powder made from jabara that has been dried using far infrared rays.

The powder is made by infrared drying, which preserves the flavor and color well. Jabara was also called the "phantom fruit" because its cultivation area was limited. It is said that the name "jabara" comes from its unique acidity and flavor, which were considered to "ward off evil spirits." Its active ingredient is a type of flavonoid called "naringin." It has an outstanding content among citrus fruits, particularly in the peel, which is known to contain 6 to 10 times more than the juice. Jabara powder is dried with the rich peel that contains naringin.

Company：中野BC
Price：Other

Powder Molding Machine
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Material "Ranman Gaba Powder"

Peace of mind! Safety! Low cost!

"Ranmangaba Powder" is a GABA-containing fermented material made from rice bran, which has been dried and powdered using a unique fermentation technique with plant-based lactic acid bacteria developed by a sake brewery. It contains the trending amino acid GABA and has lipid metabolism improvement effects. Since the moromi (fermented mash) is dried and powdered, it is low-cost, and being made from 100% domestically produced rice bran ensures safety and security. Additionally, it is insoluble, making it ideal for solid product additives. [Features] ■ Safe ■ Secure ■ Low-cost ■ Lipid metabolism improvement effects ■ 100% domestically produced *For more details, please refer to the catalog or feel free to contact us.

Company：秋田銘醸
Price：Other

Food/beverage functional materials
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Powdered vinegar

Things that can be done because it's in powder form.

It is a smooth-flowing, high-acidity powdered vinegar. Unlike additives (acidulants), it can impart the natural acidity, umami, richness, and brewing aroma of vinegar. We offer powdered brewing vinegar and rice vinegar. It can be used in various applications such as seasonings, instant noodles, snack seasonings, and beverage ingredients. 【Features】 ■ Handling powdered brewing vinegar and rice vinegar ■ High handling properties ■ Possesses the natural flavor of vinegar *For more details, please refer to the catalog or feel free to contact us.

Company：佐藤食品工業
Price：Other

seasoning
Food ingredients (powder)
Beverage ingredients (powder)
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cyclodextrin inclusion complex product "NZ Propolis CD"

Sample available! Propolis, which is high in viscosity and not easy to handle, has been powdered.

"NZ Propolis CD" is a propolis powder made from NZCAPE30+ propolis extract, which contains a high concentration of CAPE as its raw material. This propolis, which is high in viscosity and difficult to handle, has been powdered using γ-cyclodextrin (CD). By encapsulating the active ingredient CAPE with γ-CD, the stability and solubility of CAPE are improved, and enhanced absorption is expected. A characteristic feature is that the unique flavor of propolis is mildly masked by γ-CD. Samples are available upon request. Please feel free to contact us. 【Functionalities of Propolis CD Powder】 ■ Brain function improvement effects ■ Induction effects of nerve cell differentiation ■ Antibacterial activity ■ Antifungal activity *For more details, please refer to the PDF materials or feel free to contact us.

Company：シクロケム
Price：Other

Food/beverage functional materials
Pharmaceutical materials and carriers
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Food raw material "FD Mandarin Orange Powder"

The peel of Wenzhou mandarins is powdered without using any additives such as flavorings or colorings!

"FD Mikan Powder" is a powder made from the peel of the Unshu mikan (satsuma mandarin) using a unique technology that preserves the original flavor and components of the material without additives. It exclusively uses Unshu mikan from the "Nishi-Uwa" region, which has a history of over 100 years as a mikan-producing area. It contains notable functional components such as "β-cryptoxanthin." You can use it as an ingredient for health foods by leveraging its functional components in general foods like confectionery and baking. 【Features】 ■ Powdered using a unique method ■ Only uses Unshu mikan from the Nishi-Uwa region ■ Contains β-cryptoxanthin *For more details, please refer to the catalog or feel free to contact us.

Company：伊方サービス
Price：Other

Beverage ingredients (powder)
Food ingredients (powder)
Food/beverage functional materials
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Food raw material "AD Blue Ponkan Powder"

Powdered blue ponkan containing many functional ingredients using air-drying method!

"AD Blue Ponkan Powder" is a food ingredient made from whole blue ponkan (immature ponkan fruit) that has been powdered using an air-drying method. Blue ponkan contains many functional components, such as hesperidin and nobiletin, similar to green mandarin. It is mainly suitable as a raw material for health foods. 【Features】 ■ Air-drying method ■ Contains many functional components ■ Ideal for health foods and more *For more details, please refer to the catalog or feel free to contact us.

Company：伊方サービス
Price：Other

Beverage ingredients (powder)
Food ingredients (powder)
Food/beverage functional materials
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vegetable Powder "Domestic Vegetable Powder Series"

Delivering health with peace of mind and safety!

The "Domestic Vegetable Powder Series" is a vegetable powder that concentrates the power and deliciousness of domestically produced vegetables. All vegetable ingredients from Nippon Powder Pharmaceuticals are sourced from domestic farmers, ensuring safety and peace of mind. We also offer a convenient series of domestic vegetable premixes, so please feel free to consult with us. 【Features】 ■ Uses domestic ingredients ■ Sourced from domestic farmers ■ Safe and secure ■ Rich lineup *For more details, please refer to the catalog or feel free to contact us.

Company：日本粉末薬品
Price：Other

Food ingredients (powder)
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mineral product "Mica Powder (White Mica, Gold Mica)"

Improving plastic rigidity and heat resistance! Various grades available to suit your needs!

"Myca powder" is a mineral with a plate-like crystal structure. Due to differences in crystal structure, there are "white mica," which has high whiteness and versatility, and "gold mica," which has improved rigidity and heat resistance compared to white mica. We offer various grades sourced from China and Spain to suit different applications. 【Features】 ■ Improved plastic rigidity ■ Enhanced heat resistance ■ Reduced thermal shrinkage ■ Wet ground products ・Micronization with a high aspect ratio ・Reduced impurities ■ Dry ground products ・High mass production capability and cost competitiveness *For more details, please refer to the PDF document or feel free to contact us.

Company：KINSEI MATEC CO., LTD.
Price：Other

Glass
paint
powder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

powder Product List and Ranking from 164 Manufacturers, Suppliers and Companies | IPROS GMS

powder Manufacturer, Suppliers and Company Rankings

powder Product ranking