1～15 item / All 164 items
Highly versatile single-suction vortex pump
【Features】 General water supply. Hot and cold water circulation. Industrial water. Irrigation. *For more details, please refer to the PDF document or feel free to contact us.
Achieving a lightweight and strong resin pump!
【Features】 For sewage tank drainage and kitchen drainage. For general waste water drainage. Realizes a lightweight and strong resin pump. Adopts a high-speed impeller design with a large foreign object passage, allowing it to handle liquids containing various foreign substances. *For more details, please refer to the PDF document or feel free to contact us.
A compact, versatile pump that is economical, has a wide range of applications, and operates with low power consumption and low noise.
**Features** Internal gear pump. Economical and suitable for a wide range of applications. Extremely suitable for transferring in low to medium pressure intermittent operations. Provides stable liquid delivery with minimal pulsation, foaming, and agitation. Self-priming pump capable of suction. Simple design allows for very economical use. Operating range from 1 to 1700 L/min. Mechanical seals and gland packing are available. *For more details, please refer to the PDF document or feel free to contact us.*
All bolts made of stainless steel, easy-to-maintain screw pump.
The "JF type" is a cast iron vortex pump with a closed impeller design that can accommodate a wide range of needs with its rich variety of options. High-efficiency pumps are available in both 4-pole and 2-pole series, allowing for selection based on application. Additionally, the adoption of the B.P.O (Back Pull-Out) method enables easy maintenance without the need to remove the piping. 【Standard Specifications (excerpt)】 ■ Diameter: Φ40×Φ32 to Φ150×Φ125 ■ Liquid temperature: 0℃ to 100℃ (varies depending on the liquid used) ■ Maximum operating pressure: Pump shut-off pressure ≦ 1MPa (10.2kgf/cm²・G) ■ Flange standard: JIS B2239 10K flat R.F (screw-in type flange) *For more details, please refer to the PDF document or feel free to contact us.
Centrifugal slurry pump with excellent wear resistance and solid passage capability.
The "SPL type" is a lined slurry pump that is effective for transporting slurry liquids (fluids containing solid materials) that can cause early wear and clogging in general clean water centrifugal pumps. The impeller is a semi-open type with a wide flow path, which excels in the passage of solid materials, making it less likely to clog even with slurry liquids containing large particles, high-concentration slurries, or organic sludge, thus allowing for stable operation. 【Features】 - Major components in contact with the liquid, such as the impeller and casing liner, are made of high-chromium cast iron that has undergone advanced heat treatment, achieving excellent wear resistance. - Long service life is achieved for slurry liquids containing abrasive particles. - The high-chromium cast iron on the inner surface of the casing has a removable liner structure, allowing for recovery of performance by replacing only the liner when the inner surface of the casing wears. - There are high-efficiency models available that improve maximum efficiency by up to 11 points depending on the model size, contributing to reduced power consumption. *For more details, please refer to the PDF document or feel free to contact us.*
The first in the country! Easy cleaning with the adoption of a stainless steel motor.
The first in the country! With the adoption of a stainless steel motor, it allows for easy cleaning. Made entirely of stainless steel, it is resistant to rust and durable. The motor, contact parts, and base are all made of stainless steel. Its simple structure makes cleaning easy. It can be continuously used at temperatures up to 100°C and is compatible with CIP cleaning. The connection parts are connected with clamps and butterfly bolts, and can be disassembled with just one wrench. The 0.75kW/1.5kW motors comply with top runner IE3 premium efficiency standards, while the 0.2kW/0.4kW motors are equivalent to IE2. *Note: CIP cleaning refers to a system that allows for safe automatic cleaning without disassembling production equipment through simple operations. *For more details, please refer to the PDF document or feel free to contact us.
A rich variety to meet all needs!
(Compliant with Japan Industrial Standards (JIMS)) Can accommodate all needs with a rich variety of options. (No change in external dimensions) All bolts are made of stainless steel for easy maintenance (excluding shaft coupling bolts and foundation bolts). High-efficiency pumps are available in a series, allowing for selection tailored to specific applications. Adoption of the B.P.O (Back Pull-Out) method allows for easy maintenance without removing the piping. The center top and foot support shape is advantageous against piping loads. *For details, please refer to the PDF document or feel free to contact us.
Economical engine pump driven by a diesel engine.
■Features - Large discharge capacity. - Excellent self-priming performance. - Easy drainage of soil and mud mixtures. - Economical diesel engine drive. *For more details, please refer to the PDF document or feel free to contact us.
Portable and easy to carry small submersible pump for wastewater.
■Features - Compact and lightweight design with a simple structure, resulting in fewer failures and easy transport. - The semi-open impeller easily lifts dirty water passing through the strainer, making it suitable for a wide range of applications. - Equipped with an oil bath type mechanical seal. - The electric motor includes an automatic burnout prevention device. *For more details, please refer to the PDF document or feel free to contact us.
Corrosion-resistant and highly durable wastewater submersible pump.
■Features - Wide range of applications including clean water, wastewater, and sewage. - All wetted parts are made of resin and stainless steel, offering excellent corrosion resistance and durability. - New mechanism that allows for changing the discharge direction in either "vertical" or "horizontal" orientation (excluding 1.5kW and 2.2kW models). - Back pull-out structure allows for inspection and cleaning without disconnecting the piping. - Built-in automatic burnout prevention device in the motor. - Adoption of LLT (Long Life Tech) improves the cooling and lubrication of the mechanical seal (for 0.25kW to 0.75kW models). *For more details, please refer to the PDF document or feel free to contact us.
Portable and easy to install sewage submersible pump.
■Features - Compact and lightweight design, convenient for portability and installation. - All wetted parts are made of resin and stainless steel (SUS316), which are resistant to rust and significantly improve durability. - Unique vortex structure developed to eliminate clogging. - High-efficiency, energy-saving impeller and motor developed in-house. - Motor includes an automatic burnout prevention device. *For more details, please refer to the PDF document or feel free to contact us.
Family pump for watering gardens and plants.
■Features - Plug with a leakage circuit breaker. *For more details, please refer to the PDF document or feel free to contact us.
Self-priming vortex pump with back pull-out structure
Cellular Plunger Pump Mechanical Seal ■Features - Achieves high efficiency with a hydraulically analyzed impeller and casing, with a wide range of specifications suitable for various applications. - B.P.O (Back Pull-Out) structure allows for disassembly, inspection, and repair without removing the piping. - Utilizes a fully enclosed outdoor electric motor that is resistant to rain. *For more details, please refer to the PDF document or feel free to contact us.
All cast iron self-priming vortex pump
Self-priming Pump ■Features - Can self-prime without filling the suction pipe completely, thanks to the specially designed casing. - The shaft seal section adopts a maintenance-friendly gland packing method. - Made entirely of cast iron as standard, making it suitable for use with alkaline liquids. - The use of sealed ball bearings eliminates the need for bearing lubrication. (OL-8E to O-9E) (O-10E and O-11E use open ball bearings with grease injection) *For more details, please refer to the PDF document or feel free to contact us.
All cast iron self-priming vortex pump
Self-priming pump ■Features - Self-priming capability without the need to fill the suction pipe due to the special structure of the casing. - The shaft seal section adopts an easily replaceable gland packing method. - Standard specification is all cast iron, making it suitable for use with alkaline liquids. - The use of sealed ball bearings eliminates the need for bearing lubrication. *For more details, please refer to the PDF document or feel free to contact us.
