We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for putty.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

putty(100) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.

putty Product List

16～25 item / All 25 items

Displayed results
Non-silicone thermal conductive paste, thermal conductivity 8.0 W/m·K

Non-silicone thermal conductive paste, thermal conductivity 8.0 W/m·K

It is a paste-like thermal conductive material that has a hardness intermediate between thermal conductive grease and thermal conductive sheets.

It is used to fill the gap between the heating element and the heat sink, efficiently conducting heat from the heating element to the heat sink. 【Features】 ● Silicone-free (does not use silicone-based materials), so low molecular siloxanes do not occur, eliminating issues such as electrical contact failure. ● Excellent adhesion and conformity to uneven surfaces and curved surfaces, providing reliable thermal conductivity performance. ● High viscosity allows for vertical application without dripping. ● Being clay-like, it can adhere more closely to each component compared to conventional thermal conductive sheets. ● No worries about pump-out. ● Electrically insulating. ● Applied using a dispenser. ● Available as a set with thermal conductive paste and dispenser, thermal conductive paste only, or dispenser only.

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Repair epoxy putty "Lectoseal" Unitec

Repair epoxy putty "Lectoseal" Unitec

Heat resistance is -40 to 200°C! It hardens like metal in 15 to 20 minutes after bonding, allowing for emergency repairs.

"Rektor Seal" is an easy-to-use repair epoxy putty that can be simply cut and kneaded together. It has various applications such as repairing holes and cracks, adhesion, sealing, molding, and surface reformation. It begins to harden in 5 to 10 minutes and fully sets in 15 to 20 minutes. After more than an hour of hardening, it can be processed by tapping, polishing, or painting. 【Applicable Materials (excerpt)】 ■ Stainless Steel ■ Iron ■ Copper ■ Wood ■ Aluminum *For more details, please refer to the PDF document or feel free to contact us.

  • 3.PNG
  • 2.PNG
  • Repair Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【業務用 ネズミ忌避パテ】キクネンB-7V

【業務用 ネズミ忌避パテ】キクネンB-7V

【ネズミ忌避パテ】カプサイシンの辛み刺激でねずみの侵入をシャットアウト！

キクネンB-7Vはマイクロカプセル化したカプサイシンを含有させた業務用のネズミ忌避パテです。 【特長】 　■マイクロカプセル化したカプサイシンを含有 　■不乾性（非硬化型） 　■難燃性（UL-94 V-0 相当） 　■作業性抜群 【主用途】 　■ネズミの侵入口の穴塞ぎ 　■ビル、工場、倉庫、厨房等のケーブル / 配管等の貫通部 　■無電柱化（電線地中化）工事のケーブルや配管等の貫通部 ※ 詳しくは当社HPをご確認していただくか、お気軽にお問い合わせ下さい。 　　お問い合わせ窓口（電話）　06-6693-3561

  • Wiring materials
  • Other consumables

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-content alumina ceramic powder epoxy putty "Heat-resistant and wear-resistant metal"

High-content alumina ceramic powder epoxy putty "Heat-resistant and wear-resistant metal"

250℃ heat resistance / Achieving both self-lubrication and high wear resistance!

"KAN Paste Heat-Resistant and Wear-Resistant Metal" is an industrial repair material ideal for equipment such as piping, tanks, valves, covers, and pumps that are subjected to heat. It is formulated with a high concentration of alumina ceramic powder, providing heat resistance (up to 250°C), self-lubrication, and excellent wear resistance. Being a poor conductor of electricity and heat, it also offers excellent insulation properties, allowing for safe use. Additionally, it is resistant to mineral oils, gasoline, seawater, and alkaline chemicals, making it suitable for a wide range of environments. 【Features】 ■ Formulated with alumina ceramic powder for heat resistance and self-lubrication ■ High resistance to wear ■ Excellent insulation properties as a poor conductor of electricity and heat ■ Resistant to many chemicals including mineral oils, gasoline, seawater, and alkaline substances ■ Strong adhesion to all types of metals *For more details, please refer to the PDF document or feel free to contact us.

  • Repair Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Metal and machinery equipment putty "Aikupate"

Metal and machinery equipment putty "Aikupate"

Sample available! Putty that can be used for scratches, hole filling, and surface preparation before painting.

"Icupate" is suitable for filling nests, filling holes, repairing with added material, and lining for wear protection. It comes in a capacity of 4kg can / 20kg drum for the main agent, and 100g tube for the hardener. It cures quickly in 30 minutes and has a high wear resistance with a heat resistance temperature of 180°C. For orders over 40kg, we can manufacture it custom-made according to your preferences, such as color. 【Features】 ■ Filler for nests, holes, repair with added material, and lining for wear protection ■ Heat resistance temperature of 180°C, high wear resistance ■ Material cost is less than 50% compared to epoxy ■ Cures in 30 minutes ■ Machining is possible after complete curing *For more details, please refer to the PDF document or feel free to contact us.

  • glue
  • Repair Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cast Iron Repair Putty High Viscosity Type 'Aikupate'

Cast Iron Repair Putty High Viscosity Type 'Aikupate'

Sample available! Putty that can be used for scratches, hole filling, and surface preparation before painting.

"Ike Pate" is suitable for filling voids, repairing holes, building up surfaces, and protecting worn areas with lining. It comes in two sizes: main agent in 4kg cans or 20kg drums, and hardener in 100g tubes. It cures quickly in 30 minutes and has a high wear resistance with a heat resistance temperature of 180°C. For orders over 40kg, we can custom-make it according to your color and other preferences. 【Features】 - Filler for voids, hole repairs, surface buildup, and wear protection lining - Heat resistance temperature of 180°C and high wear resistance - Material cost is less than 50% compared to epoxy - Cures in 30 minutes - Machinable after full curing *For more details, please refer to the PDF document or feel free to contact us.

  • glue
  • Repair Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[No Welding Required] Meat Filling Repair Putty 'Aikupate'

[No Welding Required] Meat Filling Repair Putty 'Aikupate'

Sample available! Putty that can be used for scratches, filling holes, and surface preparation before painting.

"Ike Pate" can be used for filling nests, filling holes, building up repairs, and lining for wear protection. It comes in a capacity of 4kg cans / 20kg pails for the main agent, and 100g tubes for the hardener. It cures quickly in 30 minutes and has a high wear resistance with a heat resistance temperature of 180°C. For orders of 40kg or more, we can customize it according to your color preferences and other requests. 【Features】 ■ Filler for nests, holes, build-up repairs, and wear protection lining ■ Heat resistance temperature of 180°C and high wear resistance ■ Material cost is less than 50% compared to epoxy ■ Cures in 30 minutes ■ Machinable after complete curing *For more details, please refer to the PDF document or feel free to contact us.

  • glue
  • Repair Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Time-saving] Metal repair in 30 minutes! 'Aiku Putty'

[Time-saving] Metal repair in 30 minutes! 'Aiku Putty'

Sample available! Putty that can be used for scratches, hole filling, and surface preparation before painting.

"Icupate" can be used for filling voids, patching holes, building up repairs, and lining wear areas. It comes in a capacity of 4kg cans / 20kg pails for the main agent, and 100g tubes for the hardener. It cures quickly in 30 minutes and has a high wear resistance with a heat resistance temperature of 180°C. For orders over 40kg, we can manufacture it custom-made according to your color preferences and other requests. 【Features】 ■ Filler for voids, patching holes, building up repairs, and lining wear areas ■ Heat resistance temperature of 180°C, high wear resistance ■ Material cost is less than 50% compared to epoxy ■ Cures in 30 minutes ■ Machinable after complete curing *For more details, please refer to the PDF document or feel free to contact us.

  • glue
  • Repair Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Ike Pate" contributes to the longevity of equipment through wear protection.

"Ike Pate" contributes to the longevity of equipment through wear protection.

Sample available! Putty that can be used for scratches, filling holes, and surface preparation before painting.

"Iku Pate" is suitable for filling nests, filling holes, repairing with added material, and lining for wear protection. It comes in a capacity of 4kg cans / 20kg drum for the main agent, and 100g tubes for the hardener. It cures quickly in 30 minutes and has high wear resistance with a heat resistance temperature of 180°C. For orders over 40kg, we can customize it according to your color preferences and other requests. 【Features】 ■ Filler for nests, holes, repair with added material, and lining for wear protection ■ Heat resistance temperature of 180°C, high wear resistance ■ Material cost is less than 50% compared to epoxy ■ Cures in 30 minutes ■ Machining is possible after complete curing *For more details, please refer to the PDF document or feel free to contact us.

  • glue
  • Repair Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Titanium-containing metal repair putty 'MeCaFix 120'

Titanium-containing metal repair putty 'MeCaFix 120'

Precision machining and threading are possible! Protects your equipment from corrosive liquids and more.

"MeCaFix 120" is a metal repair putty that cures at low temperatures and contains stainless steel and titanium. It is designed to protect working surfaces in various orientations without dripping, offering high versatility and protecting your equipment from abrasion, corrosion wear, and corrosive liquids. Additionally, it maintains excellent durability against pressure and distortion while allowing for precision machining, drilling, and threading. 【Coverage Area】 ■ Theoretical coverage area for 1kg ・0.4m2 / 1mm thickness ■ Actual coverage area ・Theoretical coverage area × (100% - loss %) *For more details, please refer to the PDF document or feel free to contact us.

  • s1.jpg
  • s2.png
  • s3.png
  • Repair Agent
  • Other consumables

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to putty

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.