1～15 item / All 37 items
19-inch aluminum rack that is easy to customize for FA, measurement, control, and AV applications.
Easily customizable 19-inch cabinet rack with an aluminum frame specification, making it lightweight.
For storing network equipment and cable management. A lightweight 19-inch network rack with an aluminum frame.
This is a lightweight, high-performance 19-inch network rack with an aluminum frame design. It offers a wide variety of sizes and specifications.
19-inch open rack made of steel for information and communication technology.
A 19-inch open rack equipped with functionality that can be used in various fields regardless of purpose, designed for optical wiring. The 19-inch panel mount section comes in two types: M5 screw hole specification and square hole specification.
Electromagnetic shield server rack that protects information from electromagnetic wave eavesdropping and cyber terrorism.
EMC shield specifications to prevent leakage and destruction of information assets! Recently, there has been a surge in information leakage incidents from companies and local governments, making information security measures urgent. In modern society, the most important asset can be said to be "information," and the place where this information asset (data) is consolidated is the server. There is an urgent need for measures against Tempest (electromagnetic eavesdropping) caused by noise emitted from monitor screens, cables, etc., and against electromagnetic waves (both unintentional and intentional) from external sources that can cause servers to malfunction or lead to failures (cyber terrorism). If information assets are leaked or destroyed due to electromagnetic waves, it becomes a significant issue that affects the very foundation of society. The introduction of shielded server racks is an effective means of securing information assets.
19-inch rack with a slim aluminum frame design.
It is a slim 19-inch cabinet rack with a width of 540mm. The size is well-equipped.
19-inch rack with a split aluminum frame design for data centers.
This is a 19-inch rack with a split aluminum frame design for data centers. The panel mount frame is divided, allowing it to be installed in different positions in the upper and lower sections of the rack. Considering the security of each section, it is equipped with partition panels, a bottom ground plate, and a wiring duct set.
Compact PCI Specification Subrack FCS Series
Standard model Sablack FCS series that pursues cost performance, compliant with the Compact PCI industrial computer standard.
This is an outdoor-type 19-inch rack suitable for outdoor information communication systems, featuring dustproof and waterproof measures.
The outdoor rack "WPR Series" is designed with dust and water resistance features, making it suitable for outdoor unmanned base stations for information communication systems such as disaster prevention wireless, wireless monitoring, and VICS. With consideration for the environment, the "electrostatic painting + powder coating" offers excellent weather resistance and has undergone salt spray testing (JIS Z 2371). The available sizes range from a maximum of 43U (W700×H2000×D700) to a minimum of 11U (W650×H600×D600), accommodating various special specifications. 【Features】 ○ Performance verified through dust and water resistance tests, achieving a protection rating of IP54 ○ Environmentally friendly with excellent weather resistance through "electrostatic painting + powder coating" → Conducted salt spray testing (JIS Z 2371) ○ Capable of supporting a load of up to 600kg ○ Equipped with sunshade panels to reduce temperature rise from direct sunlight ○ Wiring holes for power and communication cables are installed at the bottom of the rack → Grounding measures are possible For more details, please contact us or download the catalog.
19-inch rack case with FRP exterior panel that can be transported/used with equipment installed.
This is a trunk case that can accommodate electronic devices such as measuring instruments with a 19-inch mount type. It is compatible with both JIS and EIA standard 19-inch equipment. Customization is easy, and we can flexibly accommodate changes in size, exterior panels, and interior urethane foam specifications.
For data centers! High seismic-resistant split-type steel 19-inch rack with improved heat dissipation performance.
The "Split Server Rack SSR2 Series" is a split-type version of the 19-inch rack "SSR2 Series" designed for rack-mounted servers and storage. Each compartment ensures high security with partition boards and other features. The door with heat dissipation holes (approximately 68% opening ratio) increases the effective heat dissipation area, enhancing heat dissipation performance. The panel mount frame is divided, allowing installation at different positions in each compartment, and wiring to each compartment can be done from the top or bottom of the rack through ducts. We can flexibly accommodate changes in split specifications and external dimensions (width, height, depth). 【Features】 ■ Each compartment ensures high security with partition boards and other features ■ The door with heat dissipation holes (approximately 68% opening ratio) increases the effective heat dissipation area, enhancing heat dissipation performance ■ The panel mount frame is divided, allowing installation at different positions in each compartment ■ Wiring to each compartment can be done from the top or bottom of the rack through ducts ■ Ergonomic design door handle ■ Standard non-split version is also available in the lineup *For more details, please refer to the PDF document or feel free to contact us.
A small-sized 19-inch rack for storing communication equipment/hubs that fits under the desk.
● This is a compact 19-inch rack designed for storing communication equipment, taking into account heat management and ease of installation. ● The variety of sizes makes it suitable for a wide range of storage, from network communication devices, hubs, routers, HDDs, and NAS to servers. ● To address heat management, there are ventilation holes on the front, back, and sides. ● The side panels and rear panel can accommodate optional fan motors (RAFM series, 120mm square models) for forced exhaust. ● The side panels and rear panel can be locked when equipped with an optional coin lock (SKRO-3CL). ● There are holes provided at the back of the rack (top/bottom) to allow for bundling and securing cables with tie wraps or similar. ● The base has a flame-retardant grommet with holes for wiring. ● The adjustable feet can be replaced with optional casters (NPCT-70S).
19-inch server rack with approximately 22dB soundproofing, heat dissipation efficiency, and high seismic performance.
● A 19-inch rack that balances soundproofing and heat dissipation efficiency while having high seismic performance ● Compliant with NEBS Zone 3 (loaded mass 600kg, maximum acceleration 1108gal (1.13G)) ● Maximum load capacity of 1250kg (at rest) ● Provides a quiet and comfortable office environment with soundproofing of up to approximately 22dB ● Soundproof structure using silencers and sound-absorbing materials to reduce noise from stored equipment ● Equipped with a large airflow low-noise fan that efficiently circulates heat within the rack and dissipates it ● A structure that prevents sound leakage by drawing in air from the bottom of the rack and exhausting it from the top with a fan ● The front door features an acrylic window that allows visibility into the rack's interior, offering both functionality and a stylish appearance
Introducing ideal cabling that improves work efficiency for data center racks!
The "SSRW Series" is a 19-inch rack that allows for equipment storage and advanced cable management. By opening the front and side panels, cabling between connected racks can be achieved, and by combining additional items with the basic set, expansion to three or more units is possible. By attaching the separately sold wiring bar "NPBAR-100B" to the wiring bar mounting bracket, cables from the left and right racks can be neatly organized. 【Features】 ■ Allows for equipment storage and advanced cable management ■ Expansion to three or more units is possible by combining additional items with the basic set ■ Cabling between connected racks is possible by opening the front and side panels ■ Flexible adjustments for width, height, depth dimensions, etc. (for special specifications) *For more details, please refer to the PDF materials or feel free to contact us.
Tall rack case for audio and video, fully customizable.
● This is a rack case that can accommodate 19-inch mountable audio and video equipment according to EIA standards. ● It uses exterior panels made of high-strength materials (ABS board + plywood) and an aluminum frame. ● The exterior panels are black, and the aluminum frame is silver. ● An aluminum panel mount frame is used in the 19-inch mounting section, and support angles for heavy loads can also be installed. ● It comes standard with swivel casters that have stoppers. ● To facilitate lifting during transport, handles are attached to the sides. ● The front and rear lids can be easily attached and detached using a catch lock.
Dust and water resistance equivalent to IP54, dust-proof 19-inch rack with upgraded functionality.
We offer a steel 19-inch rack with an IP54 equivalent dust and water resistance rating. 【Features】 ● The dust and water resistance is equivalent to IP54. * This applies when preventing dust ingress while the interior of the rack is not in a negative pressure state. For more details, please contact us. ● We can flexibly accommodate customer specifications and other requirements. ● The front and rear exterior panels can be selected from various doors and rear panels. ● Wiring holes with cushioning are installed on the bottom of the rack. * For more details, please refer to the documentation.
