resinのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

resin×アイエムジェイ - メーカー・企業と製品の一覧

resinの製品一覧

1～15 件を表示 ／ 全 16 件

表示件数
Cutting processing material: PBI resin

Cutting processing material: PBI resin

Resins are attracting attention as materials that can replace carbon, C/C composites, ceramics, metals, and more!

We would like to introduce the cutting material "PBI resin" that we handle. This ultra-high-performance resin was developed in collaboration with AFML. Its glass transition temperature is approximately 425°C, and its heat deflection temperature under load is around 410°C. As a resin, it possesses high heat resistance, mechanical properties, and electrical properties, making it a resin of interest as a substitute for materials such as carbon, C/C composites, ceramics, and metals. 【SCM7000 PBI Natural Grade Features】 ■ Mechanical properties: High strength and high hardness ■ Thermal properties: Ultra heat-resistant, low expansion rate, and low thermal conductivity ■ Energy resistance properties: Good plasma resistance ■ Solvent resistance properties: Strong resistance to acids, bases, and organic solvents ■ Wear resistance ■ High heat resistance *For more details, please refer to the related links or feel free to contact us.

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Cutting processing material: PEI resin

Cutting processing material: PEI resin

Amorphous thermoplastic plastic with excellent mechanical strength and rigidity!

We would like to introduce the cutting processing material "PEI resin" that we handle. It is an amorphous thermoplastic with excellent mechanical strength and rigidity. It possesses outstanding heat resistance (up to 170°C) and electrical properties. We offer extrusion grades such as "TECAPEI natural," which has excellent mechanical strength with a tensile strength of over 100 MPa at room temperature, and "TECAPEI GF30 natural," which contains 30% glass fiber using Sabic Ultem. 【Features of TECAPEI natural】 ■ PEI (polyether imide) using Sabic Ultem ■ Excellent mechanical strength with a tensile strength of over 100 MPa at room temperature ■ Excellent heat resistance, demonstrating outstanding properties even in environments above 150°C ■ Among amorphous resin materials, it has excellent chemical resistance, as well as good UV resistance and hot water resistance *For more details, please refer to the related links or feel free to contact us.

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Cutting processing material: PE-UHMW resin

Cutting processing material: PE-UHMW resin

Ultra-high molecular weight polyethylene with a molecular weight exceeding 10 million! It has excellent wear resistance.

We would like to introduce the cutting processing material we handle, "PE-UHMW resin." It is ultra-high molecular weight polyethylene with a molecular weight exceeding 10 million. It has a friction coefficient of 0.08, providing extremely high wear resistance. Additionally, it can be used in processes where food comes into direct contact. Please feel free to contact us if you have any requests. 【TECAFINE PE 10 BH Features】 ■ Molecular weight of 10.2 million ■ Very low friction coefficient of 0.08 (PTFE: 0.07) ■ Extremely excellent wear resistance ■ Complies with Ministry of Health and Welfare Notification No. 370 ■ Can be used in processes where food comes into direct contact ■ Melting point is approximately 135°C, with a maximum operating temperature of 130°C *For more details, please refer to the related links or feel free to contact us.

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Precision machining of polyimide resin (PI resin) [SCM8000]

Precision machining of polyimide resin (PI resin) [SCM8000]

We offer precision machining of the SCM8000 from PBI Corporation. We have a large inventory. From small lots of 1 piece to mass production!

The SCM8000 is a machining material made from ultra-high heat-resistant polyimide UPI natural grade, compressed and molded using the PBI method. It features ultra heat resistance, a load deflection temperature of up to 480°C, excellent mechanical properties, good wear resistance, low water absorption, and anti-static/conductive properties. We respond to customer needs with advanced processing technology tailored to the characteristics of PBI resin. 【Key physical properties at 23°C (partial)】 ■ Tensile strength: 100 MPa (Standard ISO 527) ■ Tensile strain: 2.0% (Standard ISO 527) ■ Flexural strength: 190 MPa (Standard ISO 178) ■ Flexural modulus: 7.0 GPa (Standard ISO 178) ■ Charpy impact strength (notched): 1.5 kJ/m² (Standard ISO 179) *You can view our available equipment by downloading the PDF. Please feel free to contact us for any other inquiries.

  • Processing Contract

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Precision machining of polyimide resin (PI resin) [Sepra SA101]

Precision machining of polyimide resin (PI resin) [Sepra SA101]

We offer precision machining of the ultra-heat-resistant polyimide molded product "Sepra" SA series from Suzukou Shoji. We have a large inventory available. From small lots of 1 piece to mass production!

The "Sepra SA101" is a polyimide molded body characterized by a high heat distortion temperature of 470°C compared to the standard grade Sepra. In addition, it possesses plasma resistance, low water absorption rate, and low outgassing properties, demonstrating effectiveness in applications such as liquid crystal and semiconductor manufacturing equipment. We respond to customer needs with advanced processing technology tailored to the characteristics of PI resin. 【Main Physical Properties (Partial)】 ■ Tensile Strength (Standard D-638) - Condition 23°C: 110 MPa - Condition 260°C: 47 MPa ■ Elongation (Standard D-638) - Condition 23°C: 4.0% - Condition 260°C: 3.0% *You can view the available equipment by downloading the PDF. Please feel free to contact us for any other inquiries.

  • Processing Contract

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Precision machining of polyimide resin (PI resin) [Sepra SA201]

Precision machining of polyimide resin (PI resin) [Sepra SA201]

We offer precision machining of the ultra-heat-resistant polyimide molded product "Sepra" SA series from Suzukiko Shoji. We have a large inventory available. From small lots of 1 piece to mass production!

The "Sepra SA201" is a grade of polyimide molding with a high performance, featuring a heat distortion temperature of 486°C, while also offering excellent cost performance, making it suitable for a wider range of applications. It is characterized by ultra-heat resistance (heat distortion temperature of 486°C), high vacuum properties, good machinability, and low impurity concentration. We respond to customer needs with advanced processing technology tailored to the characteristics of PI resin. 【Key Physical Properties】 ■ Tensile Strength: 72 MPa (Standard D-638) ■ Elongation: 4.4% (Standard D-638) ■ Flexural Strength: 109 MPa (Standard D-790) ■ Flexural Modulus: 4.3 GPa (Standard D-790) ■ Coefficient of Linear Expansion: 50 ppm/°C (Standard D-233) *You can view the available equipment by downloading the PDF. Please feel free to contact us for any other inquiries.

  • Processing Contract

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Precision machining of polyimide resin (PI resin) [DuPont SP-1]

Precision machining of polyimide resin (PI resin) [DuPont SP-1]

We offer precision machining of DuPont's Vespel Series SP-1 polyimide resin. We have a large inventory available. From small lots of 1 piece to mass production!

The DuPont Bespoke Series SP-1 is a polyimide resin characterized by heat resistance, insulation properties, and high mechanical strength. With advanced processing technology tailored to the properties of polyimide resin, we meet all of our customers' needs. 【Key physical properties at 296K】 Tensile strength: 86.2 MPa Tensile elongation at break: 7.5% Flexural strength: 110.3 MPa *You can view the available equipment by downloading the PDF. Please feel free to contact us for any other inquiries.

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Cutting processing material: PPS resin

Cutting processing material: PPS resin

A material that excels in flame resistance, chemical resistance, electrical properties, and dimensional stability!

We would like to introduce the cutting processing material "PPS resin" that we handle. It is a crystalline resin with excellent heat resistance (continuous use temperature of about 220°C), mechanical strength, rigidity, flame retardancy, chemical resistance, electrical properties, and dimensional stability. Due to its low coefficient of linear expansion and low water absorption, it has excellent dimensional stability. We offer products such as "TPS-PPS Natural" and our original conductive grade "TPS-PPS230-AE3," which is compounded with special carbon. 【Features of TPS-PPS Natural/TPS-PPS G40% BK】 ■ Excellent dimensional stability due to low coefficient of linear expansion and low water absorption ■ Extremely excellent chemical resistance, unaffected by strong inorganic acids and strong alkalis ■ High strength and high rigidity, with excellent fatigue resistance and creep resistance *For more details, please refer to the related links or feel free to contact us.

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Cutting process material: Fluororesin

Cutting process material: Fluororesin

Utilizing the excellent chemical stability, electrical properties, and low friction coefficient of fluororesin!

We would like to introduce the cutting material "fluororesin" that we handle. Utilizing the excellent chemical stability, electrical properties, and low friction coefficient of fluororesin, it is suitable for connectors, terminals, and other electrical components. We offer a wide range of products including "Naflon PTFE," "Naflon PFA sheets" that can be thermally molded into complex shapes, and "Naflon PCTFE sheets" that excel in mechanical properties. 【Features】 ■ Naflon PTFE - Compressed molding of PTFE alone or powder raw materials blended with various inorganic fillers. ■ Naflon PFA sheets - Possesses properties comparable to PTFE and can be thermally molded into complex shapes. *For more details, please refer to the related links or feel free to contact us.

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Cutting processing material: PAI resin

Cutting processing material: PAI resin

Amorphous resin! Excellent heat resistance and mechanical strength with imide bonds and good processability.

We would like to introduce the cutting processing material "PAI resin" that we handle. It is an amorphous resin with excellent heat resistance and mechanical strength due to imide bonds, as well as good machinability and heat resistance (continuous use temperature of 250°C). We offer the "TPS-TI5000 Series TI-5013 General Grade," which excels in stress crack resistance, and the "TPS-TI5000 Series TI-5031 Sliding Grade." 【TPS-TI5000 Series TI-5013 General Grade Features】 ■ Heat resistance (continuous use temperature of 250°C) ■ High heat deformation resistance (load deflection temperature of 278°C) ■ Mechanical properties (especially tensile strength and impact resistance) ■ Fatigue resistance ■ Flame retardancy ■ Friction and wear characteristics *For more details, please refer to the related links or feel free to contact us.

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Precision machining of polyimide resin (PI resin) [DuPont SP-21]

Precision machining of polyimide resin (PI resin) [DuPont SP-21]

We offer precision machining of DuPont's Vespel Series SP-21 polyimide resin. We have a large inventory available. From small lots of one piece to mass production!

The DuPont Bespoke Series SP-21 is a polyimide resin characterized by heat resistance, insulation properties, and high mechanical strength. With advanced processing technology tailored to the characteristics of polyimide resin, we meet all of our customers' needs. 【Key physical properties at 296K】 Tensile strength: 65.5 MPa Tensile elongation at break: 4.5% Flexural strength: 110.3 MPa *You can view our available equipment by downloading the PDF. Please feel free to contact us for any other inquiries.

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Precision machining of polyimide resin (PI resin) [DuPont SP-22]

Precision machining of polyimide resin (PI resin) [DuPont SP-22]

We offer precision machining of DuPont's Bespoke Series SP-22 polyimide resin. We have a large inventory. From small lots of 1 piece to mass production!

The DuPont Bespel Series SP-22 is a polyimide resin characterized by heat resistance, insulation properties, and high mechanical strength. Advanced processing technology tailored to the characteristics of polyimide resin allows us to meet all of our customers' needs. [Key physical properties at 296K] Tensile strength: 51.7 MPa Tensile elongation at break: 3.0% Bending strength: 89.6 MPa *You can view the available equipment by downloading the PDF. Please feel free to contact us for any other inquiries.

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Precision machining of polyimide resin (PI resin) [DuPont SP-211]

Precision machining of polyimide resin (PI resin) [DuPont SP-211]

We offer precision machining of DuPont's Bespel Series SP-211 polyimide resin. We have a large inventory. From small lots of 1 piece to mass production!

The DuPont Bespel Series SP-211 is a polyimide resin characterized by heat resistance, insulation properties, and high mechanical strength. With advanced processing technology tailored to the characteristics of polyimide resin, we meet all of our customers' needs. 【Key physical properties at 296K】 Tensile strength: 44.8 MPa Tensile elongation at break: 3.5% Flexural strength: 68.9 MPa *You can view the available equipment by downloading the PDF. Please feel free to contact us for any other inquiries.

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Precision machining of polyimide resin (PI resin) [DuPont SP-3]

Precision machining of polyimide resin (PI resin) [DuPont SP-3]

We offer precision machining of DuPont's Bespoke Series SP-3 polyimide resin. We have a large inventory. From small lots of 1 piece to mass production!

The DuPont Bespel Series SP-3 is a polyimide resin characterized by heat resistance, insulation properties, and high mechanical strength. With advanced processing technology tailored to the properties of polyimide resin, we meet all of our customers' needs. [Key physical properties at 296K] Tensile strength: 58.5 MPa Tensile elongation at break: 4.0% Flexural strength: 75.8 MPa *You can view the available equipment by downloading the PDF. Please feel free to contact us for any other inquiries.

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Precision machining of polyimide resin (PI resin) [DuPont SP-202]

Precision machining of polyimide resin (PI resin) [DuPont SP-202]

We offer precision machining of DuPont's Bespell Series SP-202 polyimide resin. We have a large inventory and can handle small lots starting from one piece to mass production!

The DuPont Bespell Series SP-202 is a polyimide resin characterized by heat resistance, insulation properties, and high mechanical strength. With advanced processing technology tailored to the characteristics of polyimide resin, we meet all of our customers' needs. 【Key Physical Properties at 296K】 Tensile Strength: 92.0 MPa Tensile Elongation at Break: 4.5% Flexural Strength: 159 MPa *You can view the available equipment by downloading the PDF. Please feel free to contact us for any other inquiries.

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

resinに関連する検索キーワード

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.