resinのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

resin×北川グレステック - メーカー・企業と製品の一覧

resinの製品一覧

1～15 件を表示 ／ 全 26 件

表示件数
Silicone resin "Provil novo Light"

Silicone resin "Provil novo Light"

Safe and error-free work is possible! A two-component mixed silicone suitable for molding complex shapes.

"Provil novo Light" is a low-viscosity silicone resin suitable for molding complex shapes. It consists of a dispensing gun, cartridge, and mixing tube, and the resin is uniformly mixed simply by pulling the lever of the gun. This allows for safe and error-free work. The mixed resin can be directly applied to the sample. For applications in small cavities or holes, attachments for fine work are available. 【Features】 ■ High precision transfer performance (< 0.1 μm) ■ Suitable for surface transfer on etched surfaces (max. 500:1) ■ Accurately reproduces treated surfaces in three dimensions ■ Moderately deformable, allowing for accurate reproduction of complex-shaped samples ■ No work errors due to the automatic mixing system *For more details, please refer to the PDF document or feel free to contact us.

  • Resin processing machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fast-curing resin "Technovit 3040"

Fast-curing resin "Technovit 3040"

Cures with two components: powder and liquid! A high-hardness transfer resin based on acrylic.

"Technovit 3040" is a fast-curing resin based on acrylic. It comes in yellow and black colors and cures with a two-component system of powder and liquid. It is suitable for casting shapes, positioning samples for transfer, hard-to-reach areas, vertical surfaces, and back sides. 【Features】 ■ Fast-curing resin based on acrylic ■ Cures with a two-component system of powder and liquid ■ Colors: Yellow, Black ■ Suitable for hard-to-reach areas, vertical surfaces, and back sides ■ Mixing ratio 1:1 - 3:1 (powder: liquid) *For more details, please refer to the PDF document or feel free to contact us.

  • Resin processing machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Low-temperature polymerizable resin "Technovit 4000"

Low-temperature polymerizable resin "Technovit 4000"

Achieving gap-free resin embedding for all metal samples! Fast-curing, low-temperature polymerizable resin.

"Technovit 4000" is a fast-curing, low-temperature polymerization resin based on polyester. It cures with three components: powder, syrup I, and syrup II. Its low shrinkage during polymerization and perfect edge fit, along with excellent flow properties, allow for the embedding of complex-shaped samples. Its excellent adhesion to metals enables gap-free resin embedding for all metal samples. It is also suitable for samples with porous surfaces, small cracks, or cavities in unseen areas. 【Features】 ■ Cures with three components: powder, syrup I, and syrup II ■ Low shrinkage during polymerization and perfect edge fit ■ Excellent adhesion ■ Capable of embedding complex-shaped samples ■ Mixing ratio 2:2:1 (powder:syrup I:syrup II) *For more details, please refer to the PDF document or feel free to contact us.

  • Resin processing machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fast-curing resin "Technovit 4004"

Fast-curing resin "Technovit 4004"

Active in industries such as metal product manufacturing! Fast-curing resin based on acrylic.

"Technovit 4004" is a fast-curing resin based on acrylic. It cures with two components: powder and liquid. It is suitable for all samples that require a transparent embedding resin, especially when it is necessary to confirm the samples embedded during sample preparation. It is actively used not only in the metal manufacturing industry but also in the electronics industry. 【Features】 ■ Fast-curing resin based on acrylic ■ Cures with two components: powder and liquid ■ Mixing ratio 2:1 (powder: liquid) *For more details, please refer to the PDF document or feel free to contact us.

  • Resin processing machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fast-curing resin "Technovit 5000"

Fast-curing resin "Technovit 5000"

Also usable for electrochemical polishing of metal samples! Conductive cold-hardened acrylic resin.

"Technovit 5000" is a fast-curing resin based on acrylic. It cures with two components: powder and liquid. It contains copper powder, providing the conductivity necessary for SEM observation, and can also be used for the electrolytic polishing of metal samples. 【Features】 ■ Fast-curing resin based on acrylic ■ Cures with two components: powder and liquid ■ Contains copper powder ■ Has the conductivity required for SEM observation ■ Mixing ratio 2:1 (powder:liquid) *For more details, please refer to the PDF document or feel free to contact us.

  • Resin processing machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fast-curing resin "Technovit 5071"

Fast-curing resin "Technovit 5071"

It can be dissolved after hardening! A fast-curing resin with excellent machinability and polishing properties.

"Technovit 5071" is a fast-curing resin based on acrylic. It cures with two components: powder and liquid. After curing, it can be dissolved with acetone, dichloromethane, and other solvents. It has high adhesion and excellent machinability and polishing properties. 【Features】 - Fast-curing resin based on acrylic - Cures with two components: powder and liquid - Can be dissolved with acetone, dichloromethane, and other solvents - High adhesion - Excellent machinability and polishing properties *For more details, please refer to the PDF document or feel free to contact us.

  • Resin processing machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Cold curing resin "Technovit 7100"

Cold curing resin "Technovit 7100"

Cold-cured resin that can be sliced to a thickness of 1μm for materials such as plastic, metal foil, paper, and fibers.

"Technovit 7100" is a resin composed of three components based on HEMA (2-hydroxyethyl methacrylate). It is suitable for use with a microtome during optical microscope examinations of material samples. For porous products, fibers, and paper, preliminary infiltration is recommended, while no additional infiltration treatment is necessary for plastics and metal foils. [Features] - Composed of three components based on HEMA - Samples embedded in resin can be sliced at the micron level - Practical for industrial applications - No additional infiltration treatment required for plastics and metal foils *For more details, please refer to the PDF document or feel free to contact us.

  • Resin processing machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Embedding resin for inspection "Technovit 8100"

Embedding resin for inspection "Technovit 8100"

Suitable for observation of samples using optical microscopy, a HEMA-based resin for enzymatic chemistry and immunology!

"Technovit 8100" is a resin based on HEMA suitable for observation of samples using optical microscopy. If the specimens are demineralized iliac crests or implanted biomaterials, they can be used not only for histological purposes but also for enzymology and immunology applications. It is suitable for specimen observation in histology, zoology, botany, enzymology, and immunology. 【Features】 ■ Based on HEMA suitable for observation using optical microscopy ■ Particularly suitable for specimen observation in histology, zoology, botany, enzymology, and immunology ■ Composed of nearly odorless plasticizers and hydrophilic resins ■ Especially suitable for cold curing (4 °C) ■ Service life is approximately 2 years *For more details, please refer to the PDF document or feel free to contact us.

  • Plastic utensils and containers

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Catalog for Sample Analysis Resin "Technovit"

Catalog for Sample Analysis Resin "Technovit"

High-quality resin products that combine high reliability and ease of operation are featured!

This catalog introduces the resin for sample analysis manufactured by KULZER GmbH, which is handled by Kemet Japan Co., Ltd. Kulzer's Technovit is a high-quality resin product that combines high reliability with ease of use. Its range of applications is limitless, and it can be used in various fields. [Contents (excerpt)] ■Technovit 4000 ■Technovit 4004 ■Technovit 4006 ■Technovit 4006SE ■Technovit 4071 *For more details, please refer to the PDF document or feel free to contact us.

  • Plastic utensils and containers

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Embedding resin for inspection 'Technovit 9100'

Embedding resin for inspection 'Technovit 9100'

Ideal for immunohistochemical studies including in-situ hybridization!

"Technovit 9100" is a plastic embedding system based on MMA (methyl methacrylate). It has been specifically developed for the embedding of calcified tissues and soft tissues using an extended research spectrum under an optical microscope. It is suitable for immunohistochemical studies, including histological overview staining, enzymatic chemistry, and in-situ hybridization. 【Features】 ■ Plastic embedding system based on MMA (methyl methacrylate) ■ Developed for the embedding of calcified tissues and soft tissues ■ Suitable for immunohistochemical studies, including in-situ hybridization ■ Polymerization occurs by eliminating oxygen using a catalyst system consisting of peroxides and amines ■ Additional components such as PMMA powder and modifiers enable controlled polymerization at low temperatures (ranging from -2 to -20°C depending on volume) to ensure complete dissipation of polymerization heat *For more details, please refer to the PDF document or feel free to contact us.

  • Plastic utensils and containers

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Acrylic resin 'Acrylic'

Acrylic resin 'Acrylic'

It is possible to embed transparently! It is suitable when you want to precisely target specific areas for polishing.

"Acrylic" is a thermosetting acrylic resin that can be embedded transparently. To achieve a clean embedding, it should be thoroughly cooled after applying heat. It is suitable when you want to target specific areas for polishing or when side transparency is required. 【Features】 ■ Can be embedded transparently ■ Suitable when side transparency is needed ■ Should be thoroughly cooled after applying heat ■ Manufactured by PRESI *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Resin "Acrylic with Copper powder"

Resin "Acrylic with Copper powder"

The curing temperature is 170°C and the curing time is 15 to 20 minutes! It is suitable for SEM observation and electro-polishing, among other uses.

"Acrylic with Copper powder" is a resin in which copper powder is mixed with thermosetting acrylic resin. Among the resins manufactured by PRESI, there are two types suitable for SEM observation and electro-polishing: "conductive phenolic resin" and this product. The difference is that the "conductive phenolic resin" contains carbon, while this product contains copper powder. Please choose based on the embedding material. 【Features】 ■ Contains copper powder ■ Suitable for SEM observation and electro-polishing ■ Manufactured by PRESI *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Epoxy resin "EPOXY"

Epoxy resin "EPOXY"

Ideal for those aiming for edge observation! Introducing a black epoxy resin with very low shrinkage.

Epoxy resin is considered to have very low shrinkage among thermosetting materials. This product can be used for various observations of metal materials, including edge observation, appearance observation, hardness testing, and microstructure observation. Due to its low shrinkage and the difficulty of creating gaps between the resin and the material, this resin is particularly suitable for those aiming for edge observation. 【Features】 ■ Low shrinkage ■ Difficult to create gaps between the resin and the material ■ Manufactured by PRESI *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Acrylic resin "KM-B"

Acrylic resin "KM-B"

It can be easily removed from the mold! It can be used with heat-resistant materials.

"KM-B" is an acrylic resin that hardens by mixing powder and liquid. Acrylic resins generally cure quickly, so they are inferior to epoxy resins in terms of shrinkage, but they are suitable for those who want to cure quickly while also considering shrinkage. It is suitable for use when you need to quickly fill in materials that are resistant to heat, such as for hardness testing or tissue observation. 【Features】 ■ Mixes powder and liquid to harden ■ Can be used with heat-resistant materials ■ Resin color is blue ■ Easily removable from molds ■ Manufactured by PRESI *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Acrylic resin "KM-U"

Acrylic resin "KM-U"

Can be used with heat-resistant materials! Suitable for quickly embedding heat-resistant materials during hardness testing and tissue observation, etc.

"KM-U" is an acrylic resin manufactured by PRESI that mixes powder and liquid and cures. If it can withstand heat, it cures quickly even among room temperature curing resins. Using the pressure device "PRESSURE VESSEL" helps with shrinkage and allows for degassing, so we recommend using them together. It is suitable for hardness testing and tissue observation, especially when you need to embed heat-resistant materials quickly. 【Features】 ■ Cures quickly among room temperature curing resins ■ Can be used with heat-resistant materials ■ Recommended equipment: PRESSURE VESSEL (pressure device) *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

resinに関連する検索キーワード

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.