Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
46～60 item / All 86 items
Widely used in the medical field.
■Erbium-doped YAG crystals oscillate at a wavelength of 2.94 μm and are widely used in the medical field. ■Very high conversion efficiency ■Can be used at room temperature ■Eye safety wavelength
【Campaign for surpassing 4000 units sold is underway】 Our transfer rods use a magnetic system and can be used in ultra-high vacuum environments.
This is an introduction device that transmits linear and rotational motion to samples and equipment in a vacuum from the atmospheric side. This product is recommended for transporting samples over relatively short distances (200mm to 300mm). Due to its magnetic system, it achieves complete vacuum sealing with the outside and provides stable operation for a semi-permanent duration. It can be applied to equipment requiring linear and rotational motion installed in a vacuum. The interior of the main body is treated with electric field polishing, making it usable up to ultra-high vacuum regions. By using the stopper in the drive unit, positioning at any desired distance and angle is possible. An optional rotation stop mechanism can also be installed. Additionally, there are specifications available for corrosive gas compatibility, so please consult us. <Common Specifications for Both Models> Permissible Leak Rate: ≦1.33×10-11Pa·m3/sec Permissible Heating Temperature: ≦200℃ Straight Force: 3kgf Rotational Torque: 2kgf/cm Rotational Angle Scale: 30° Drive Shaft Diameter: φ6mm Connection Flange Size: ICF-70FH Drive Method: Magnetic For more details, please refer to the PDF document or feel free to contact us.
It can be used up to the ultra-high vacuum range! Linear movement and rotational motion can be performed simultaneously.
We handle the "2-axis transfer rod (magnet type)." With the magnet type sliding mechanism, linear movement and rotational motion can be performed simultaneously. Depending on your needs, positioning bellows joints, custom strokes and end processing, as well as motor-driven types are also possible. 【Features】 ■ The magnet type sliding mechanism allows for simultaneous linear movement and rotational motion. ■ Operation is simple due to the magnetic mechanism. ■ Complete vacuum sealing with the outside. ■ Arbitrary position settings are possible with the stopper. ■ Usable up to ultra-high vacuum areas. *For more details, please refer to the PDF materials or feel free to contact us.
Transfer Rod TR Series
Transfer rod that can introduce rotational and linear motion into a vacuum with high torque due to a powerful magnetic circuit. 【Features】 ○ Bakeable with all-metal seals ○ Usable with various ultra-high vacuum devices such as MBE systems due to CF specifications ○ Installation is φ70 CF specification ○ High torque achieved through magnetic coupling of a powerful magnetic circuit ○ Enables 4-axis motion transmission into a vacuum when combined with XY mechanisms and others ● For other functions and details, please download the catalog.
Chucking Transfer 2TRW
Transfer rod capable of chucking operations using a 2-axis structure magnetic coupling 【Features】 ○ High torque rotation and linear motion can be introduced into a vacuum due to a powerful magnetic circuit ○ Bakeable with an all-metal seal ○ Usable with various ultra-high vacuum devices such as MBE systems due to CF specifications ○ Installation is φ70 CF specification ○ High torque achieved through optimal magnetic circuit design ● For other functions and details, please download the catalog.
Significant time savings with one-touch replacement! No tools required, eliminating the need for skilled labor.
The "Model PME" is a quick ejector rod that can be easily attached and detached with just one touch. It features a split-type ejector rod, allowing for quick replacement by simply inserting and removing the attachment rod, completing the task in just a few seconds. This dramatically improves the replacement process. Additionally, it has a simple mechanical structure that offers high reliability and a long lifespan. Please feel free to contact us if you have any inquiries. 【Features】 ■ One-touch replacement ■ Tool-free ■ Lightweight and safe ■ High reliability *For more details, please download the PDF or feel free to contact us.
Holder rods other than standard products can also be manufactured! The insulating part is made of glass epoxy material.
The "BHR Series" is a holder rod designed for mounting the brush holders of the S, B, and V series. The insulating part is made of glass epoxy material. We offer options such as "BHR-10100G" with a pitch of 6×1.0 and "BHR-12100G" with a pitch of 8×1.25. Additionally, we can manufacture holder rods that are not standard products. 【Features】 ■ For securing brush holders of the S, B, and V series ■ Insulating part made of glass epoxy material ■ Custom holder rods can also be manufactured *For more details, please refer to the PDF document or feel free to contact us.
Evaluation of the degree of motor coordination disorder and motor learning.
The "RTR-M5" is a rotating rod test device capable of measuring five mice simultaneously. There is also a "RTR-M1" available for one mouse. When an animal falls onto the tray, it is automatically detected by a near-infrared sensor. The tray can be pulled out, making it easy to retrieve the animals. Additionally, the rotating parts and dividers that the animals touch can be removed and cleaned. There are three operating modes available, and it can also be used for acclimatization purposes. 【Features】 ■ Displays the elapsed time until the animal falls in each lane and the rotation speed at that time ■ Automatically detects when an animal falls onto the tray using a near-infrared sensor ■ The tray can be pulled out, making it easy to retrieve the animals ■ The tray is autoclavable *For more details, please refer to the PDF document or feel free to contact us.
Assessment of the degree of motor coordination disorder and motor learning.
The "RTR-R3/RTR-R1" is a rotating rod test device for rats that can be used to evaluate motor coordination and motor learning. The elapsed time until the animal falls from each lane and the rotation speed at that time are displayed. Additionally, the tray can be pulled out, making it easy to retrieve the animals. Furthermore, the rotating parts and dividers that the animals touch can be removed and are washable. 【Features】 ■ Three operating modes that can also be used for acclimatization purposes ■ Automatic detection by near-infrared sensors when the animal falls into the tray ■ Tray is autoclavable ■ Rotating parts and dividers that the animals touch can be removed and are washable ■ Smooth acceleration due to a high-performance motor *For more details, please refer to the PDF document or feel free to contact us.
This is an introduction to various measuring instruments used for steel frame measurements.
We offer a variety of products for different purposes. We have a wide range of measuring instruments and many other items available. Please feel free to contact us. 【Product Lineup】 ○ Ribbon Rod ○ Reel ○ Styron Reel ○ Pin Pole ○ Survey Flag, etc. The products introduced are just a part of our offerings. We also handle many other construction-related items. Some products are available for lease as well. Please consult us for bulk orders. For more details, please download the catalog or contact us.
A one-axis sample transporter designed for transporting samples between UHV chambers!
The "RM40" is a simple all-metal seal linear rotary sample introduction device designed for ultra-high vacuum applications. It is particularly suitable for sample transport between UHV chambers. The set of rare earth magnets on the air side and vacuum side provides the necessary force to ensure a strong connection from the handle to the inner shaft. 【Product Lineup】 ■RM40-0500-0030 ■RM40-0750-0030 ■RM40-1000-0030 ■RM40-1250-0030 *For more details, please download the PDF or feel free to contact us.
Silicone rods suitable for medical and food grade applications!
The "rods" handled by Benefit Corporation are available in sizes ranging from 1mm to 20mm, hardness from 40 degrees to 90 degrees, and thickness from t = 0.5mm and above, tailored to your specifications and drawings. We can manufacture from small-scale prototypes, and we also accommodate medical and food grades, so please feel free to contact us if you have any requests. 【Applicable Range】 ■ Size: From 1mm to 20mm ■ Thickness: From t = 0.5mm ■ Hardness: From 40 degrees to 90 degrees *For more details, please refer to the catalog or feel free to contact us.
The global brand of surfacing materials, Kolmono.
For requests regarding sample evaluations and automation proposals, please feel free to download the catalog and contact us! Colmonoy is an alloy based on nickel, chromium, and boron, also known as a self-fusing alloy. The characteristics of Colmonoy include the densification of the surface through fusing and the generation of very hard boride crystals, which disperse on the surface to achieve high density, high strength, and high corrosion resistance with a high level of quality. At Shinwa, we offer a wide range of powders and thermal spray rods, including Colmonoy 69SM, which corresponds to JIS Class 4 materials, for use in Colmonoy thermal spraying. We also provide custom rods and equivalent products from other companies.
