We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for sleeve.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

sleeve Product List and Ranking from 41 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.

sleeve Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.

  1. フカガワ Saitama//Manufacturing and processing contract
  2. ニチフ Osaka//Electronic Components and Semiconductors
  3. ハギテック 本社工場 Chiba//Trading company/Wholesale
  4. 4 シュンク・カーボン・テクノロジー・ジャパン Kanagawa//Machine elements and parts
  5. 5 Zenshin Co., Ltd. Osaka//Ferrous/Non-ferrous metals
Go to Company Ranking

sleeve Product ranking

Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.

  1. Other duct square pipe sleeve (with internal flange type) フカガワ
  2. Round solid sleeve 1.6t フカガワ
  3. Introduction of Schunk's CFRP sleeve for high-speed rotating motor applications. シュンク・カーボン・テクノロジー・ジャパン
  4. 4 ALC penetration part piping assembly board for water heaters "Smooth Sleeve" Zenshin Co., Ltd.
  5. 5 Insulated Coated Pressure Terminal and Sleeve Catalog ニチフ

sleeve Product List

181～195 item / All 296 items

Displayed results
CIP molding rubber mold (sleeve-shaped)

CIP molding rubber mold (sleeve-shaped)

CIP molding rubber mold (sleeve shape) with integrated rubber flanges at both ends.

This is a rubber sleeve for CIP molding. The required shape and thickness of the "rubber sleeve" vary depending on the "molded products," "molded powders," and "molding equipment." Generally, straight shapes are common, but the "rubber sleeve" we produced this time was designed with flanges at both ends for easier assembly with the equipment. Previously, it seems that the flange parts were glued, but due to insufficient strength of the adhesive and differences in elongation between the adhesive and rubber, this led to early failure, prompting a search for solutions. After contacting our company, we proposed an integrated molding solution, and we completed the production of the "rubber sleeve" with integrated molding of the flange and rubber tube parts, starting from medium-sized production. Assembly with the machinery has also become easier, and damage from the connection points has been reduced.

  • Other processing machines
  • Rubber

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Can be used for IH heating and heat pipes! 【Clad Sleeve】

Can be used for IH heating and heat pipes! 【Clad Sleeve】

Successful practical application of ultra-thin seamless sleeves (thin-walled pipes) made of clad material (multilayer steel)!

It is used as a substrate for IH heating and has the characteristic of achieving both thinness and thermal conductivity, making it suitable for applications that require high thermal conductivity in the pipe itself. 【Features】 - Ultra-thin seamless sleeves made by layering dissimilar metals such as stainless steel and copper are now possible. - The strength of the sleeve is ensured by stainless steel, while the copper layer provides self-heating and heat transfer functions. - It achieves dimensional accuracy equivalent to that of conventional stainless steel ultra-thin seamless sleeves.

  • Other semiconductor manufacturing equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
A video of the processing of a metal ultra-thin seamless sleeve (thin-walled pipe) has been released!

A video of the processing of a metal ultra-thin seamless sleeve (thin-walled pipe) has been released!

We will release a video demonstrating the spinning method that achieves metal ultra-thin seamless sleeves (thin-walled pipes).

A metal ultra-thin seamless sleeve with a thickness of 10μm, processed using a special method called spinning, is a proprietary technology of Endo Manufacturing. We are releasing processing videos for the first time. Please watch as the stainless steel pipe is stretched thin. 【Features】 ■ Complete seamless processing is possible. ■ Enables ultra-thin processing with a thickness of 10μm, unlike anything before. ■ Minimum diameter φ12mm to maximum diameter φ80mm, maximum length L400mm. ■ Compatible with various metals including stainless steel, iron, copper, nickel, nickel alloys, titanium, and clad materials. ■ We have a production track record of 3 million pieces per year.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
AccuPrint EC Sleeve

AccuPrint EC Sleeve

Extend lifespan and demonstrate repeatability! Choose RotoMetrics for various printing needs.

The "AccuPrint EC Sleeve" is a product that resists deformation and aging of the foam components. The lightweight core material provides high dimensional stability. The optional metal cut line allows for sleeve surface cutting. Additionally, our unique manufacturing process maximizes stability and repeatability. 【Features】 ■ The internal core maximizes not only strength but also resistance to chemicals and UV rays. ■ The foam components resist deformation and aging. ■ The optional steel insert ring protects the alignment notch. ■ Manufactured using very stable materials. ■ Improved sleeve lifespan. ■ Built to achieve speed, quality, and service. *For more details, please download the PDF or feel free to contact us.

  • AccuPrint ECスリーブ2.png
  • Protective Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dipole Antenna Precision Sleeve ~5.9GHz

Dipole Antenna Precision Sleeve ~5.9GHz

5.4GHz to 5.9GHz Precision Sleeve Dipole Antenna

The precision sleeve dipole is a non-directional antenna with a low VSWR and an electrical dipole pattern similar to a half-wavelength resonant dipole. Thanks to the sleeve dipole design, which eliminates the interaction between the cable and the feed point that can degrade antenna performance and reduce cable interaction, it can be end-fed. The sleeve dipole antenna features a nominal impedance of 50 ohms, a maximum continuous transmission power of 1 watt, and an SMA female connector (with an optional N female connector). Please contact us for more details. Values for gain, VSWR, maximum ripple, and measurement uncertainty are provided with each calibration.

  • Time-frequency measurements
  • Other electronic measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fusion Sleeve FinishAdapt

Fusion Sleeve FinishAdapt

◆Sleeve length: 10mm – 85mm ◆Stainless steel pin available/not available ◆Compliant with Telcordia GR-1380-CORE ◆Short delivery time

◆Standard lineup includes thin diameter and long types◆Sales from 500 pieces onwards ●With stainless steel pins Inner diameter: 0.35mm – 1.9mm / Outer diameter: 1.3mm – 3.7mm ●With FRP pins (non-metal) Inner diameter: 1.4mm / Outer diameter: 2.4mm ●Without pins Inner diameter: 0.35mm – 1.4mm / Outer diameter: 1.1mm – 2.1mm ●With pins for tape core wires (ribbon) Inner diameter: 3.0 x 1.0mm / Outer diameter: 2.8 x 3.7mm (1-8 core ribbon) Inner diameter: 3.5 x 1.0mm / Outer diameter: 3.75 x 4.75mm (1-12 core ribbon) NEW: Outer diameter < 2.0mm for 1-12 core ribbon *For detailed product lineup, please refer to the specifications section below.

  • Other optical parts
  • Other physicochemical equipment
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COS sleeve

COS sleeve

Cut electric energy loss! Achieve space-saving with the minimum necessary size!

The "COS Sleeve Compression Method" is a compact construction technique that excels in seismic performance and energy-saving effects, increases the tension of the core wire, and enhances mechanical strength. The "COS Sleeve" allows for easy installation with a one-two-three approach. The connection point becomes thicker than the wire itself, resulting in lower resistance and less heat generation. It can be used with devices that connect stranded wires, such as smart meters, cumulative power meters, circuit breakers, and inverters. 【Features】 ■ Domestic ferrules ■ Improved electrical performance ■ Enhanced mechanical strength ■ Space-saving ■ Increased work efficiency *For more details, please refer to the PDF document or feel free to contact us.

  • Wiring materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mobile phone vibration motor sleeve

Mobile phone vibration motor sleeve

This is a sleeve for vibration motors for mobile phones.

This is a sleeve for vibration motors for mobile phones. It can accommodate small precision parts with a size of 1.1 mm. It is compatible with a molding system that uses suction for extraction and sensors for verification. 【Specifications】 ○ Material: Engineering plastic ○ Lot: --- ○ Accuracy: --- For more details, please contact us or download the catalog.

  • Other electronic parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Urethane rubber lining, urethane sleeve

Urethane rubber lining, urethane sleeve

Immediate effectiveness. Easy-to-install urethane rubber lining.

Urethane rubber lining and urethane sleeves offer high elasticity, high durability, and quick delivery. Lining can be easily done with just one adhesive. It can be retrofitted to existing rollers. For more details, please contact us or refer to the catalog.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Product Processing Example (4) Sleeve

Product Processing Example (4) Sleeve

We provide products that are helpful to everyone in the manufacturing industry! Introduction of examples processed with the KIP-300 model.

We processed a "sleeve (1)" with dimensions of Φ4×40mm, made of aluminum, with roundness of 0.5μm, cylindricity of 2.0μm, and surface roughness of Ra0.15μm. In addition, we also processed a "sleeve (2)" with dimensions of Φ10×65mm, made of aluminum, with roundness of 0.5μm, cylindricity of 1.5μm, and surface roughness of Ra0.7μm. Our company supports precision and mass production processing across a wide range of fields, including automotive, shipbuilding, and medical industries, providing products that benefit manufacturers. Please feel free to contact us when you need assistance. 【Sleeve (1) Case Details (Excerpt)】 ■ Dimensions: Φ4×40mm ■ Material: Aluminum ■ Processing Time: 20 seconds ■ Processing Accuracy: Roundness 0.5μm / Cylindricity 2.0μm / Surface Roughness Ra0.15μm ■ Processing Allowance: 30μm ■ Model: KIP-50 *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Oil and Pneumatic Valve Related Case (2) Sleeve

Oil and Pneumatic Valve Related Case (2) Sleeve

Introducing a processing example using FC300 material! It has a machining accuracy of surface roughness Ra0.2μm and coaxiality of 2μm.

We processed "sleeves" with dimensions of Φ10/9.8 stepped holes and Φ10/10.33 stepped holes. We used FC300 as the material, achieving a machining accuracy of roundness 1μm, cylindricity 2μm, surface roughness Ra0.2μm, and coaxiality 2μm. Our company supports precision and mass production machining across a wide range of fields, including automotive, shipbuilding, and medical, providing products that benefit manufacturers. Please feel free to contact us when you need assistance. 【Sleeve Case Details】 ■Dimensions: Φ10/9.8 stepped hole / Φ10/10.33 stepped hole ■Machining Process: 1 process ■Machining Time: 30 seconds/process ■Machining Accuracy: Roundness 1μm / Cylindricity 2μm / Surface Roughness Ra0.2μm / Coaxiality 2μm ■Machining Tolerance: 20μm ■Model: KIP-300 *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sleeve

Sleeve

This is a precision sleeve made of nickel or copper electroforming, with an inner diameter tolerance of ±0.0005 mm.

This is a precision sleeve made of nickel or copper electroforming. The standard outer diameter size of the sleeve is approximately φ10 mm. The inner diameter tolerance is ±0.0005 mm. The standard length is up to 150 mm. A slit (about 0.3 mm wide) is processed along the long axis, forming a sleeve shape. It is also possible to make the inner diameter mirror-finished.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Glass sleeve

Glass sleeve

Flexible glass long fibers!

The glass sleeve is made by weaving E-glass long fibers on a braiding machine. It is highly flexible. There are various specifications available, and we can manufacture according to your requirements. Additionally, we offer silicone-treated sleeves (in white and black) and glass sleeves with cores. For more details, please contact us or download the catalog.

  • fiber

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to sleeve

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.