Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
31～60 item / All 146 items
Passive step recovery diode-based comb generator/frequency multiplier
TBCG2 is a passive step recovery diode-based comb generator/frequency multiplier. It is optimized for moderate drive power and spectral flatness in the frequency range of 1 MHz to 2.5 GHz. The recommended drive power is +10 dBm to +20 dBm. The frequency range of the drive signal is 1 MHz to 350 MHz.
Characteristic frequency range: 5MHz to 3GHz
The TBCG3-RN2 comb generator is primarily designed to test the setup of radiated emissions. It is a tool that helps verify the proper operation of antennas and preamplifiers, as well as the accurate setup and configuration of spectrum analyzers. Its characteristics in anechoic chambers are well known, and the radiation plot can be used as a benchmark to compare the comb generator at the same location as the EUT with non-ideal settings. Using a rotary switch, you can select between five fixed comb frequencies and an external comb frequency input ranging from 5 kHz to 200 MHz. The switchable RF amplifier can potentially increase the output signal by 20 decibels (dB). The comb generator comes with two monopole antennas: one is a 30 cm monopole for frequencies up to 300 to 500 MHz, and the other is for frequencies above that. The radiated comb spectrum is characterized in the range of 5 MHz to 6 GHz.
High-precision, multi-channel, dual-quadrant programmable battery simulator.
The FT8350 series is a high-precision, multi-channel, dual-quadrant programmable battery simulator. It offers voltage accuracy of up to 0.01% F.S. and supports current measurements at the μA level. The device has up to 24 channels, which are isolated from each other, making it convenient for serial use of multiple channels. The simulator supports power mode, static power consumption testing functions, charging mode, discharging mode, battery simulation, sequence testing, pulse functions, and multi-fault simulation (only for the A series), meeting the requirements for BMS testing as well as being suitable for ATE testing of consumer electronic products. The built-in upper computer software is easy to operate, flexible, and user-friendly. It supports single-channel programming operations, multi-channel editing operations, and multi-process programming operations. It adopts a standard 19-inch chassis with a height of 3U and is equipped with LAN, RS485, and CAN communication interfaces, making it convenient for integration into R&D and automated test platforms, while also being usable as a standalone unit.
High-precision, multi-channel, dual-quadrant programmable battery simulator
The FT8340 series is a high-precision, multi-channel, dual-quadrant programmable battery simulator. The simulator's current can be charged and discharged, supporting various fault simulations, thus meeting the requirements for BMS testing as well as being suitable for ATE testing of consumer electronic products. The device has up to 12 channels, each electrically isolated, making it convenient for users to use in series. The built-in upper computer software is easy to operate, flexible, and user-friendly. It supports single-channel programming operations, multi-channel editing operations, and multi-process programming operations. The FT8340 series uses a standard 19-inch chassis with a height of 2U and provides dual network ports and an RS485 communication interface. This makes it convenient to integrate into R&D and production line automation testing platforms, or it can be used standalone.
A general-purpose harmonic comb generator with switchable fundamental frequencies of 20MHz, 10MHz, or 5MHz.
The TBCG4 is a versatile harmonic comb generator equipped with switchable fundamental frequencies of 20 MHz, 10 MHz, or 5 MHz. It generates a flat comb spectrum of up to 1 GHz. The comb generator is powered from a USB C socket on the rear panel. The TBCG4 is designed and characterized to function as a multipurpose lab tool for measuring cable resonance, shielding effects, filters, crosstalk, and EMC test setups. The comb generator is commonly used as a general-purpose source for wideband RF signals or fast-rising narrow pulses.
Intelligent All-in-One UV Projection Lighting System
The NovaRay system is a fully integrated, state-of-the-art UV curing solution equipped with a high-intensity 600W UV lamp that achieves efficient and uniform post-curing. It accommodates multiple parts at once and features a large curing chamber that enhances throughput, making it suitable for a wide range of materials, including delicate 3D printed resins. At its core is precise control enabled by an advanced touchscreen interface and microprocessor, allowing for accurate curing parameters essential for materials that require specific conditions. The cooler chamber temperature function of this system ensures the integrity of materials, which is crucial for delicate applications. Customizable intensity profiles provide adaptability to various curing needs, highlighting the system's flexibility. Modern connectivity options such as USB, Ethernet, and RS-485, along with comprehensive data logging, ensure seamless integration into existing workflows, facilitating quality control and process monitoring.
Fully functional, compact, fully programmable UV flood exposure curing system.
IntelliRay is a compact and fully programmable UV flood curing system. All system components of the microprocessor-controlled UV flood curing system are integrated into a small lamp head, making it easy to install anywhere, including optional Rayven benchtop curing chambers or factory floors. You can start timed exposure curing simply by attaching the head and connecting the AC cord. This system features a built-in adjustable shade-type shutter that allows for timing adjustments of repeated exposures and protects the user from ultraviolet light. The LCD display and digital keypad make programming and monitoring curing operations easy. Long-life arc lamps and parabolic reflectors uniformly irradiate an 8 x 6 inch curing area with UV light. The arc lamp is powered by the latest UV Power Plus lamp driver. The head comes with a convenient handle and a sliding height adjustment bracket for portability. IntelliRay is available in a 400W version and a higher intensity 600W version.
Compact, high-power UV flood exposure curing system
SunRay is a compact and high-output UV flood curing system. All system components are integrated into a small lamp head, making it easy to install anywhere on the factory floor with optional stands & shields or Rayven curing chambers. There is little need for cables or a remote power box. You can start curing simply by attaching the head and connecting the AC line cord. The long-life 400 or 600W arc lamp and parabolic reflector illuminate an 8 x 6 inch curing area with evenly distributed UV light. The arc lamp is powered by a state-of-the-art UV Power-Plus lamp driver. The head comes with a convenient handle for portability and a sliding height adjustment bracket.
Optimize your workspace with smart sensing.
The VS321 is a battery-powered AI sensor that detects occupancy and monitors environmental conditions. It supports D2D and LoRaWAN, enabling smart automation and remote management. It is ideal for offices, meeting rooms, and campuses, enhancing comfort, efficiency, and space utilization. ● Wireless battery version (over 10 years of lifespan) ● Built-in multi-sensor (T&H, light) ● Up to 95% occupancy accuracy ● Accurate people counting and desk occupancy status ● 100% anonymous detection ● Unique Milesight D2D controller
![Industrial Cellular Router RUT241 [New Product]](https://image.mono.ipros.com/public/product/image/c77/2000892811/IPROS7045729960603152275.png?w=280&h=280)
Introduction to Teltonika Networks' Industrial Cellular Router
The RUT241 is a robust, compact, and versatile product suitable for IoT and M2M applications. It is an industrial cellular router compatible with 4G LTE, featuring a wide operating temperature range of -40 to 75°C and a metal housing (partially resin). It can connect to the internet via Ethernet or Wi-Fi. It supports digital I/O for remote monitoring and control, and is compatible with Modbus and DNP3, making it useful in OT and PA fields. Additionally, it supports MQTT, allowing for smooth cloud-based system development. ■ Features 1. High environmental resistance with a temperature range of -40 to 75°C 2. Compact and robust housing for easy integration into devices 3. Digital I/O for remote monitoring and control 4. Supports both Wi-Fi access point and station modes 5. Compatible with Modbus/MQTT/DNP3 6. Supports Remote Management System (RMS) 7. Wide input power voltage range of DC 9 to 30V 8. Strong security with support for various VPNs
◆ Select high transmittance from 3-17um (customizable) ◆ No Fresnel reflection (end face) ◆ High flexibility due to double polymer coating
■Core diameter: 500-1000um Art Photonics manufactures and sells Hollow Glass Waveguides (HGW) with a wavelength transmission range of 3-17um. The selected spectral region without Fresnel reflection achieves low optical loss, accommodating various applications in the mid-infrared range. 【Specifications】 Glass capillary: SiO2 Fresnel Reflection Losses: 0% Attenuation at designed minimum: Please refer to the table Core Diameter (standard): Please refer to the table Effective Numerical Aperture NA: 0.05+/-0.01 Bending losses, ø=400mm, full loop 360°: 1 dB Protective Jacket: Acrylate + Fluoro polymer Operating Temperature: –50°C to +90°C Minimum Elastic Bending Radius: 150 x [inner diameter]
Lightweight, compact, and low-cost cogenerator.
Ideal for daily checks of measurement routes Output level stability is ±2dB (TG-C2, TG-R2) Same-day shipping is possible right after order confirmation Reliable Japanese manufacturing
Achieves up to 3,000 frames per second with a maximum of 16 illuminated pixels.
The "AFBR-S50MV85G" is a multi-pixel distance and motion measurement sensor using optical ToF (Time of Flight) technology. It has been specifically developed for industrial sensors and gesture sensors that require high speed, compact size, and low power consumption. With industry-leading ambient light suppression of up to 200,000 lux, it can be used without issues in outdoor environments. 【Features】 ■ Built-in 850nm laser light source ■ 9 to 16 multi-pixel illumination ■ FOV (Field of View) angle of 6.2°×6.2° (1.55×1.55°/pixel) ■ Ultra-fast measurement of up to 3 kHz ■ Supports distances up to 10m * You can download the English catalog. * For more details, please refer to the PDF document or feel free to contact us.
Measure foreign substances over 500μm and determine surface cleanliness! Report creation from measurement data is also available!
The "Dusk 300C" is a dust sampler that measures foreign substances larger than 500μm and can assess surface cleanliness in SPC classes 6 to 8 environments. The measurement data is processed in CSV format, allowing for report creation using Excel and other software. 【Processing Flow】 ■ Collection and capture of foreign substances ■ Understanding of contents → Content analysis ■ Standardization and leveling of work → Analysis by particle size *For more details, please refer to the PDF document or feel free to contact us.
Cloud-managed networking for critical applications
The Digi IX20 is a fully functional cellular router that is scalable from basic connectivity applications to industrial-class routing and security solutions. With flexible power and connectivity options, it is a versatile choice suitable for use in critical situations requiring secure processing, such as industrial infrastructure, digital signage, retail (kiosks), and service terminals. The high-performance architecture of the Digi IX20 router provides primary and backup WWAN connectivity via software-selectable multi-carrier LTE. The Digi IX20 supports software features for the latest security (stateful firewall, MAC filtering, VPN), redundancy (Digi SureLink), and management (SNMP, event logging, analyzer trace, QoS), making it suitable for use in PCI or NERC-CIP compliant applications.
Robust, reliable, and cost-effective connectivity for critical applications.
The Digi IX10 is a fully functional cellular router built to maintain reliability without the worry of failure over a long lifespan. Its flexible power and connectivity options make it a versatile and cost-effective choice for industrial applications, digital signage, ATMs, lottery terminals, kiosks, and unattended retail applications that require secure processing. The Digi IX10 features an RJ-45 serial port that supports both RS-232 and RS-485, as well as dual SIM for redundant connections. It operates independently on LTE networks and includes features to assist with network control and management, such as VLAN support, load balancing between cellular WAN and Ethernet WAN, dual APN, and configurable APN search. The Digi IX10 also offers low-touch and no-touch provisioning.
5G edge computing industrial IoT cellular router solution specialized for Industry 4.0
The Digi IX40 is a 5G edge computing industrial IoT router solution. By integrating with Digi Remote Manager (Digi RM), it enables rapid processing, analysis, and integration of industrial asset data. Designed specifically for Industry 4.0, the Digi IX40 supports 5G connectivity and edge intelligence to realize numerous use cases, from predictive maintenance and asset monitoring to machine learning and advanced robotics. In the most demanding environments, it seamlessly connects multiple devices, both wired and wireless, optimizing the integration of operational technology (OT) services and information technology (IT) provided in the cloud, streamlining complex operations and expanding IT infrastructure.
Smooth Supply EM-210
This machine is designed to dispense bundled electrical wires and similar materials. By pulling the wires, they rotate smoothly on a free-bearing table and are dispensed. As a result of reduced unnecessary rotation due to inertia, the amount of slack has also decreased.
We have a lot of experience, so there is no need to worry about machines breaking down. We support all manufacturers' equipment.
This is a metallic thermal ribbon. It is perfect for those who want to make date displays beautifully stand out, not only in gold and silver but also in blue metallic and other colors.
Programmable for any area. Flexible lighting design that accommodates everything from single rooms to entire buildings.
This catalog introduces the products handled by Reios Co., Ltd. Helvar's solutions, which possess scalability and future potential, provide a smart and intelligent lighting environment. Utilizing artificial intelligence and machine learning, they are designed to intuitively operate spaces, discover preferences, and adapt over a lifetime, creating buildings that think and remember. [Contents (partial)] ■Hello. We are Helvar. ■What is DALI... ■Helvar Key Lighting Controls Solutions ■DIGIDIM. Flexible & programmable lighting solutions ■Imagine Endless Possibilities, etc. *For more details, please refer to the PDF document or feel free to contact us.
Visualize a clean environment! Differential pressure sensors and temperature and humidity sensors are also always available!
The portable dust monitoring system visualizes a clean environment. It is compactly housed in a box for easy mobility and flexible measurements. Please use it during the setup of clean rooms and clean booths, or for regular checks. It can also be utilized for spot measurements in production lines with poor yield. When fixed in place, the system can be used for continuous monitoring of the production line. It features a compact particle sensor that monitors cleanliness and temperature/humidity, with three channels for particles larger than 0.3μm, 0.5μm, and 1.0μm, and a suction volume of over 28L/min, utilizing software from sensor manufacturers. Wireless LAN eliminates the need for wiring, making sensor installation easy. It allows for straightforward cleanliness checks at critical points in clean rooms and clean booths. Additionally, differential pressure sensors and temperature/humidity sensors are also available for comprehensive environmental monitoring. For more details, please contact us or refer to the catalog.
This is a rental of an independent solar power supply that stores electricity generated by solar panels and outputs it at AC 100V. Pico Solar Power Supply ACE.
It can be used outdoors as a temporary power source for surveillance cameras, measuring equipment, wireless communication devices, and lighting in scenes such as highway construction and surveys. Unlike generators, it does not require refueling, which reduces the workload, and it contributes to reducing environmental impact by not producing noise or exhaust gases. Additionally, it comes standard with IoT devices that can communicate via LPWA (Sigfox). Data can be remotely monitored for power generation and storage status through the original cloud service, Rentia Cloud.
High precision, high speed, and low-cost single-point sensor. A sensor that can be embedded for thickness, distance, and height measurement. Also ideal for semiconductor wafer inspection applications.
The "CHRocodile Mini" is an affordable optical single-point sensor priced under 1 million yen. It enables high-speed and high-precision measurement/inspection, capable of distance measurement with nanometer resolution and simultaneous measurement of up to 4 surfaces and 3-layer thickness. It can measure regardless of surface conditions such as rough, mirror, or colored materials, and has a wide measurement range. 【Features】 ■ Wide thickness measurement range, compatible with various materials Covers thickness from (45um) to thick films (400mm) (for a refractive index of 1.5). As a distance sensor, it offers three types of probe lineups: 600um, 4mm, and 10mm. ■ High resolution (Z is sub-micron, XY is several micrometers) ■ Contributes to reducing development costs and shortening development lead times, with a software development kit (DLL, etc.) available for device integration. ■ Extensive track record across multiple industries Semiconductor industry, consumer electronics, glass manufacturing, medical field.
GTEM Cell EGT Series
- EMI (unwanted radiation) measurement of electronic devices - Radiated immunity testing of electronic devices (IEC 61000-4-20) - Radiated power measurement of wireless communication devices - Sensitivity measurement of wireless communication devices - Calibration of electric field probes - Evaluation of shielding materials - Products designed and manufactured by our company (domestically produced)
A comprehensive catalog featuring products from PULS, a manufacturer specializing in power supplies.
The "DIN Rail Mount Type Power Supply Comprehensive Catalog" is a catalog featuring power supply products manufactured by the German company PULS, which are developed with a focus on high efficiency, compact size, and ease of wiring. It includes single-phase input types, three-phase input types, DC input types, AS-Interface types, brackets, and other "power supplies," as well as "peripheral devices" such as diode/redundancy modules and protection modules. [Featured Products] ■ Power Supplies ■ Peripheral Devices ■ Custom Products, etc. For more details, please refer to the catalog or feel free to contact us.
Alternatives to the discontinued Technetics products that have become difficult to obtain are available!
Ensign Power Systems was established in 1995 in Colorado, USA. We design and manufacture high-reliability power supplies for military applications, as well as for medical and industrial use. In-house, we are capable of design, pre-shipment testing, and screening. Through our power supplies, we respond to our customers' demands for testing, analysis, and manufacturing with a high level of quality and reliability. We can now provide alternatives to the former Technetics products, which have become difficult to obtain. 【Products】 ■ Various power supplies - AC to AC - AC to DC - DC to DC - DC to AC * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.
Installation is very easy! The time setting can be adjusted between 0 to 20 seconds to meet different requirements.
The "PSM-25T" is a compact power supply specially designed for access control and electric lock systems. Installation is very easy, and the two output circuits are compatible with different electric locks and access control systems. The unit can be connected to a "request to exit switch button" to enable instant exit. Please feel free to contact us if you have any inquiries. 【Features】 ■ Specially designed for access control and electric lock systems ■ Two output circuits are compatible with different electric locks and access control systems ■ Time settings can be adjusted from 0 to 20 seconds for different requests ■ The unit can be connected to a "request to exit switch button" to enable instant exit *For more details, please refer to the PDF document or feel free to contact us.
![[Technical Data] Utilization Methods and Case Studies of Light Sensors](https://image.mono.ipros.com/public/product/image/2001509382/IPROS3426521370294317372.png?w=280&h=280)
Utilization methods and case studies of light sensors
A light sensor is a device that detects light and converts it into an electrical signal. The basic mechanism of a light sensor involves detecting incoming light and, depending on its intensity and wavelength, demonstrating various responses at a part called the light-receiving element, which converts it into an electrical signal. Additionally, when combined with a light-emitting element, it can detect various states based on the transmission or reflection of light. Next, the operating principle of a light sensor is to detect various information based on the magnitude of the current generated when light is incident on the light-receiving element. In the case of a photodiode being used as the light-receiving element, when light is incident, photons generate and separate electrons and holes within the semiconductor, producing a current in the external circuit. Since the current changes in proportion to the intensity of the light, the strength of the light can be measured electrically. This document introduces the applications and examples of light sensors. Nippo is developing light sensor substrates. Please feel free to contact us. *For more details, please download the PDF.
![[Column] The Mechanism and Operating Principles of Light Sensors: Introduction to Types and Examples of Use.](https://image.mono.ipros.com/public/product/image/a44/2001534669/IPROS3529021638575401979.jpg?w=280&h=280)
What are the mechanisms and operating principles of light sensors? Introducing various types and usage examples! Numerous achievements in multiple fields! Leave the development of circuit boards and sensors to Nippo!
A light sensor is a device that detects light and converts it into an electrical signal. The basic mechanism involves detecting incoming light and converting it into an electrical signal through various responses at a part called the "light-receiving element," depending on the intensity and wavelength of the light. The operating principle of a light sensor is to detect various information based on the magnitude of the current generated when light hits the light-receiving element. In the case of a photodiode being used as the light-receiving element, when light is incident, photons generate and separate electrons and holes within the semiconductor, producing a current in the external circuit. Since the current changes in proportion to the intensity of the light, it is possible to measure the strength of the light electrically. Light sensors are widely applied in various fields. Here are some specific examples: ● Industrial field: Quality control of products and position detection on automated lines ● Medical field: Pulse oximeters that measure oxygen concentration in the blood, imaging diagnostic devices that utilize light ● Daily life: Automatic doors, brightness adjustment of smartphone screens, automatic lighting of car headlights, etc. At Nippo, we also have a track record of developing light sensors for agricultural use that utilize photodiodes. You can leave the circuit board development to Nippo. Case design is also possible.
Compatible with all upright microscopes regardless of the manufacturer! A micro-Raman spectroscopic sensor in the class of the world's smallest! Remote operation via smartphone is also possible.
The microscopic Raman spectroscopy sensor "Raman EYE" is designed to be attached to an upright microscope, where it uses a laser to illuminate a sample and examines the state and type of the material from the resulting Raman scattered light. It is used for non-contact and non-destructive evaluations, such as crystallinity assessment, molecular structure analysis, and residual stress analysis. It is expected to be utilized as software for proposing new material development and for plant full automation. 【Features】 ■ Easy attachment to the microscope in one minute ■ Remote operation using a smartphone is possible ■ Achieves one of the smallest sizes in the world ■ Automatic analysis using generative AI ■ Material development can be conducted starting from around 3 million yen *For more details, please refer to the PDF document or feel free to contact us.
