Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
31～45 item / All 150 items
Passive step recovery diode-based comb generator/frequency multiplier
TBCG2 is a passive step recovery diode-based comb generator/frequency multiplier. It is optimized for moderate drive power and spectral flatness in the frequency range of 1 MHz to 2.5 GHz. The recommended drive power is +10 dBm to +20 dBm. The frequency range of the drive signal is 1 MHz to 350 MHz.
Characteristic frequency range: 5MHz to 3GHz
The TBCG3-RN2 comb generator is primarily designed to test the setup of radiated emissions. It is a tool that helps verify the proper operation of antennas and preamplifiers, as well as the accurate setup and configuration of spectrum analyzers. Its characteristics in anechoic chambers are well known, and the radiation plot can be used as a benchmark to compare the comb generator at the same location as the EUT with non-ideal settings. Using a rotary switch, you can select between five fixed comb frequencies and an external comb frequency input ranging from 5 kHz to 200 MHz. The switchable RF amplifier can potentially increase the output signal by 20 decibels (dB). The comb generator comes with two monopole antennas: one is a 30 cm monopole for frequencies up to 300 to 500 MHz, and the other is for frequencies above that. The radiated comb spectrum is characterized in the range of 5 MHz to 6 GHz.
High-precision, multi-channel, dual-quadrant programmable battery simulator.
The FT8350 series is a high-precision, multi-channel, dual-quadrant programmable battery simulator. It offers voltage accuracy of up to 0.01% F.S. and supports current measurements at the μA level. The device has up to 24 channels, which are isolated from each other, making it convenient for serial use of multiple channels. The simulator supports power mode, static power consumption testing functions, charging mode, discharging mode, battery simulation, sequence testing, pulse functions, and multi-fault simulation (only for the A series), meeting the requirements for BMS testing as well as being suitable for ATE testing of consumer electronic products. The built-in upper computer software is easy to operate, flexible, and user-friendly. It supports single-channel programming operations, multi-channel editing operations, and multi-process programming operations. It adopts a standard 19-inch chassis with a height of 3U and is equipped with LAN, RS485, and CAN communication interfaces, making it convenient for integration into R&D and automated test platforms, while also being usable as a standalone unit.
High-precision, multi-channel, dual-quadrant programmable battery simulator
The FT8340 series is a high-precision, multi-channel, dual-quadrant programmable battery simulator. The simulator's current can be charged and discharged, supporting various fault simulations, thus meeting the requirements for BMS testing as well as being suitable for ATE testing of consumer electronic products. The device has up to 12 channels, each electrically isolated, making it convenient for users to use in series. The built-in upper computer software is easy to operate, flexible, and user-friendly. It supports single-channel programming operations, multi-channel editing operations, and multi-process programming operations. The FT8340 series uses a standard 19-inch chassis with a height of 2U and provides dual network ports and an RS485 communication interface. This makes it convenient to integrate into R&D and production line automation testing platforms, or it can be used standalone.
A general-purpose harmonic comb generator with switchable fundamental frequencies of 20MHz, 10MHz, or 5MHz.
The TBCG4 is a versatile harmonic comb generator equipped with switchable fundamental frequencies of 20 MHz, 10 MHz, or 5 MHz. It generates a flat comb spectrum of up to 1 GHz. The comb generator is powered from a USB C socket on the rear panel. The TBCG4 is designed and characterized to function as a multipurpose lab tool for measuring cable resonance, shielding effects, filters, crosstalk, and EMC test setups. The comb generator is commonly used as a general-purpose source for wideband RF signals or fast-rising narrow pulses.
Intelligent All-in-One UV Projection Lighting System
The NovaRay system is a fully integrated, state-of-the-art UV curing solution equipped with a high-intensity 600W UV lamp that achieves efficient and uniform post-curing. It accommodates multiple parts at once and features a large curing chamber that enhances throughput, making it suitable for a wide range of materials, including delicate 3D printed resins. At its core is precise control enabled by an advanced touchscreen interface and microprocessor, allowing for accurate curing parameters essential for materials that require specific conditions. The cooler chamber temperature function of this system ensures the integrity of materials, which is crucial for delicate applications. Customizable intensity profiles provide adaptability to various curing needs, highlighting the system's flexibility. Modern connectivity options such as USB, Ethernet, and RS-485, along with comprehensive data logging, ensure seamless integration into existing workflows, facilitating quality control and process monitoring.
Fully functional, compact, fully programmable UV flood exposure curing system.
IntelliRay is a compact and fully programmable UV flood curing system. All system components of the microprocessor-controlled UV flood curing system are integrated into a small lamp head, making it easy to install anywhere, including optional Rayven benchtop curing chambers or factory floors. You can start timed exposure curing simply by attaching the head and connecting the AC cord. This system features a built-in adjustable shade-type shutter that allows for timing adjustments of repeated exposures and protects the user from ultraviolet light. The LCD display and digital keypad make programming and monitoring curing operations easy. Long-life arc lamps and parabolic reflectors uniformly irradiate an 8 x 6 inch curing area with UV light. The arc lamp is powered by the latest UV Power Plus lamp driver. The head comes with a convenient handle and a sliding height adjustment bracket for portability. IntelliRay is available in a 400W version and a higher intensity 600W version.
Compact, high-power UV flood exposure curing system
SunRay is a compact and high-output UV flood curing system. All system components are integrated into a small lamp head, making it easy to install anywhere on the factory floor with optional stands & shields or Rayven curing chambers. There is little need for cables or a remote power box. You can start curing simply by attaching the head and connecting the AC line cord. The long-life 400 or 600W arc lamp and parabolic reflector illuminate an 8 x 6 inch curing area with evenly distributed UV light. The arc lamp is powered by a state-of-the-art UV Power-Plus lamp driver. The head comes with a convenient handle for portability and a sliding height adjustment bracket.
Optimize your workspace with smart sensing.
The VS321 is a battery-powered AI sensor that detects occupancy and monitors environmental conditions. It supports D2D and LoRaWAN, enabling smart automation and remote management. It is ideal for offices, meeting rooms, and campuses, enhancing comfort, efficiency, and space utilization. ● Wireless battery version (over 10 years of lifespan) ● Built-in multi-sensor (T&H, light) ● Up to 95% occupancy accuracy ● Accurate people counting and desk occupancy status ● 100% anonymous detection ● Unique Milesight D2D controller
![Industrial Cellular Router RUT241 [New Product]](https://image.mono.ipros.com/public/product/image/c77/2000892811/IPROS7045729960603152275.png?w=280&h=280)
Introduction to Teltonika Networks' Industrial Cellular Router
The RUT241 is a robust, compact, and versatile product suitable for IoT and M2M applications. It is an industrial cellular router compatible with 4G LTE, featuring a wide operating temperature range of -40 to 75°C and a metal housing (partially resin). It can connect to the internet via Ethernet or Wi-Fi. It supports digital I/O for remote monitoring and control, and is compatible with Modbus and DNP3, making it useful in OT and PA fields. Additionally, it supports MQTT, allowing for smooth cloud-based system development. ■ Features 1. High environmental resistance with a temperature range of -40 to 75°C 2. Compact and robust housing for easy integration into devices 3. Digital I/O for remote monitoring and control 4. Supports both Wi-Fi access point and station modes 5. Compatible with Modbus/MQTT/DNP3 6. Supports Remote Management System (RMS) 7. Wide input power voltage range of DC 9 to 30V 8. Strong security with support for various VPNs
◆ Select high transmittance from 3-17um (customizable) ◆ No Fresnel reflection (end face) ◆ High flexibility due to double polymer coating
■Core diameter: 500-1000um Art Photonics manufactures and sells Hollow Glass Waveguides (HGW) with a wavelength transmission range of 3-17um. The selected spectral region without Fresnel reflection achieves low optical loss, accommodating various applications in the mid-infrared range. 【Specifications】 Glass capillary: SiO2 Fresnel Reflection Losses: 0% Attenuation at designed minimum: Please refer to the table Core Diameter (standard): Please refer to the table Effective Numerical Aperture NA: 0.05+/-0.01 Bending losses, ø=400mm, full loop 360°: 1 dB Protective Jacket: Acrylate + Fluoro polymer Operating Temperature: –50°C to +90°C Minimum Elastic Bending Radius: 150 x [inner diameter]
Lightweight, compact, and low-cost cogenerator.
Ideal for daily checks of measurement routes Output level stability is ±2dB (TG-C2, TG-R2) Same-day shipping is possible right after order confirmation Reliable Japanese manufacturing
Achieves up to 3,000 frames per second with a maximum of 16 illuminated pixels.
The "AFBR-S50MV85G" is a multi-pixel distance and motion measurement sensor using optical ToF (Time of Flight) technology. It has been specifically developed for industrial sensors and gesture sensors that require high speed, compact size, and low power consumption. With industry-leading ambient light suppression of up to 200,000 lux, it can be used without issues in outdoor environments. 【Features】 ■ Built-in 850nm laser light source ■ 9 to 16 multi-pixel illumination ■ FOV (Field of View) angle of 6.2°×6.2° (1.55×1.55°/pixel) ■ Ultra-fast measurement of up to 3 kHz ■ Supports distances up to 10m * You can download the English catalog. * For more details, please refer to the PDF document or feel free to contact us.
Measure foreign substances over 500μm and determine surface cleanliness! Report creation from measurement data is also available!
The "Dusk 300C" is a dust sampler that measures foreign substances larger than 500μm and can assess surface cleanliness in SPC classes 6 to 8 environments. The measurement data is processed in CSV format, allowing for report creation using Excel and other software. 【Processing Flow】 ■ Collection and capture of foreign substances ■ Understanding of contents → Content analysis ■ Standardization and leveling of work → Analysis by particle size *For more details, please refer to the PDF document or feel free to contact us.
Cloud-managed networking for critical applications
The Digi IX20 is a fully functional cellular router that is scalable from basic connectivity applications to industrial-class routing and security solutions. With flexible power and connectivity options, it is a versatile choice suitable for use in critical situations requiring secure processing, such as industrial infrastructure, digital signage, retail (kiosks), and service terminals. The high-performance architecture of the Digi IX20 router provides primary and backup WWAN connectivity via software-selectable multi-carrier LTE. The Digi IX20 supports software features for the latest security (stateful firewall, MAC filtering, VPN), redundancy (Digi SureLink), and management (SNMP, event logging, analyzer trace, QoS), making it suitable for use in PCI or NERC-CIP compliant applications.
