We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for switch.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

switch×セキュリティハウス - List of Manufacturers, Suppliers, Companies and Products

switch Product List

1～15 item / All 54 items

Displayed results
Voice-enabled non-contact card switch ACS-112N

Voice-enabled non-contact card switch ACS-112N

Voice-enabled card switch compatible with FeliCa/Mifare/I-CODE multi-read.

■ Capable of output for security and electric lock (2 systems) Equipped with two output systems in one unit, allowing for security set/reset and electric lock unlocking operations to be handled by a single device. ■ Supports embedded and surface-mounted installation With a slim design, it can be embedded in a two-gang switch box or installed on the surface using the included exposed box. (Thickness when mounted on the wall: Embedded: 18.5mm, Surface-mounted: 35mm) ■ Supports 3-mode multi-functionality Compatible with FeliCa/Mifare/I-CODE multi-read. Can operate in a mixed environment. ■ Built-in voice announcement function Includes an announcement function that guides users through operation content and control status via voice, helping to prevent operational errors. ■ Three patterns of verification methods to choose from Verification methods can be selected from "Card" only, "PIN" only, or "Card + PIN," allowing for mixed verification methods. (Registered PIN length: 1 to 8 digits) ■ Up to 1000 entries can be registered A maximum of 1000 entries can be registered in total for "Card," "PIN," and "Card + PIN."

  • Entrance and exit control system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Random Temperature Switch ACS-101

Random Temperature Switch ACS-101

A universal switch that allows control of the security system and electric lock with the input of a passcode; the keypad uses a random display type.

■ Capable of output for security and electric lock (2 systems) It has two outputs in one unit, allowing it to replace two units in locations where previously two were needed. It can operate solely for security or solely for electric lock as well. *Note: During security set, there will be no output for unlocking the electric lock. ■ Up to 3 types of passwords can be registered You can register up to 3 types of passwords ranging from 1 to 8 digits. Additionally, you can specify the operational range based on the password, allowing for user-specific operations. [Operational Range] 1. Only set/reset can be controlled 2. Only unlocking output for electric lock can be controlled 3. Both set/reset and unlocking output for electric lock can be controlled ■ Three operation modes available You can choose from three different operation modes with varying output forms, making it suitable for a wide range of applications. Latch Mode: A mode that switches between set and reset with each password input. One-Shot Mode: When in the 'normal' loop state, a password input can set for either 1 second or 5 seconds. Three-Way Remote Switch Mode: A mode for three-way output used in combination with our controller.

  • Entrance and exit control system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Card Holder Switch SA-C1

Card Holder Switch SA-C1

Card Holder Switch SA-C1

■Features ● When a card or business card is inserted, it outputs a no-voltage contact (c contact). ● It connects with the Life Safety Alarm SAH-2(S) and is used as a life safety system. ● If you attach the room key to the card, it will turn OFF when you take the card out while going out, and turn ON when you return home and put the card back. ● It is compatible with a single switch box.

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reset Switch SU-1

Reset Switch SU-1

Reset Switch SU-1

■Features ● Used for calling the living safety system, resetting sensors, and resetting the toilet usage notification system ● Pressing the button outputs a c contact (with recovery/RESET indication) ● Compatible with single switch BOX

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Matt switch 500×600mm DMS-56

Matt switch 500×600mm DMS-56

Matt switch 500×600mm DMS-56

■Features ●Outer material: Special rubber ●Operating pressure: 200N/100cm² ●2-core lead ●Detection output: a contact AC/DC 30V 0.3A or less ●Lead wire 50cm included ●Waterproof type ●Installation location: Indoor / semi-outdoor (places not directly exposed to rain)

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Matt Switch 480×800mm DMS-488

Matt Switch 480×800mm DMS-488

Matt switch 480×800mm DMS-488

Features ●Outer material: Special rubber ●Operating pressure: 200N/100cm² ●2-core lead ●Detection output: a contact AC/DC 30V 0.3A or less ●Lead wire 50cm included ●Waterproof type ●Installation location: Indoor and semi-outdoor (places not directly exposed to rain)

  • Safety Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
In-room confirmation switch, 2-contact type, SA-P2

In-room confirmation switch, 2-contact type, SA-P2

The text in the room appears large and in green. Brightness is adjustable.

■Main Features ● When the switch is pressed, the occupancy lamp lights up, and it outputs 2 contact points accordingly. Pressing it again turns it off and reverses the 2 contact point output. It can be incorporated into a living safety notification system for use. ● Brightness can be switched between two levels. ● Original design with colors that are easy for elderly individuals with glaucoma to see (when lit). ● You can freely write on the nameplate (e.g., "Lights on when occupied," "Press," etc.). ● Suitable for a single switch box.

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explosion-proof infrared beam switch DS-30EX

Explosion-proof infrared beam switch DS-30EX

This is an infrared beam switch with a pressure-resistant explosion-proof structure that can be used in hazardous locations of Class 1 and Class 2.

■ High explosion-proof performance Can be used in locations handling hazardous materials such as chemical plants, filling machine manufacturers, and explosives factories. ■ Strong aluminum case adopted This is a newly designed aluminum case tailored to the product. Additionally, it meets the waterproof grade of IP65. ■ High-performance specifications The power supply voltage can accommodate AC/DC 24–240V. The output is c contact with AC 250V・1A/DC 30V・1A (resistive load), and it can detect over a long distance of 30m. ■ Operation indication The sensor's operation indication can be confirmed from the front. Receiver: Power indicator light - red, Unstable indicator light - green Emitter: Power indicator light - red ■ Cable gland compliant with 2008 guidelines We use a pressure-resistant explosion-proof structure packing type cable gland for cable wiring work, making installation, maintenance, and repairs easier compared to conventional metal conduit wiring. ■ Sealed interior Manufactured in a highly airtight structure and in a regulated indoor environment, so there is no fogging inside.

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared Beam Switch DS-110

Infrared Beam Switch DS-110

The controller unit has been miniaturized. The wire can be freely cut, and installation is easy with connector wiring.

■Two Power Sources for Different Uses You can choose between two types of power sources, 100V and 200V, depending on the installation conditions of the electric shutter. It is compatible with all types of electric shutters using a near-infrared 1-beam opposing type. ■Connection Cables Can Be Cut Freely Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables cut freely. Additionally, the connection cables are joined by connectors, making wiring easier. ■Response Speed Switching Function In addition to normal real-time operation, it is also possible to switch to an on-delay timer operation (a function that prevents light-blocking operation by the edge of the electric shutter). ■Slim Sensor Head Can Be Installed with One Touch The sensor head for 10m detection adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in, improving workability. ■Built-in Sensitivity Volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-Friendly Design ● High-reliability design that is hardly affected by external light disturbances such as sunlight ● Equipped with an operation indicator light that is convenient for operation confirmation (Red LED: Always on, turns off when detecting)

  • Safety Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared Beam Switch DS-210

Infrared Beam Switch DS-210

The controller unit is miniaturized. The wire can be cut freely, and installation is easy with connector wiring.

■Two Power Sources for Different Uses You can choose between two types of power sources, 100V and 200V, depending on the installation conditions of the electric shutter. It is compatible with all types of electric shutters using a near-infrared 1-beam opposing type. ■Connection Cables Can Be Cut Freely Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables cut freely. Additionally, the connection cables are joined by connectors, making wiring easier. ■Response Speed Switching Function In addition to normal real-time operation, it is also possible to switch to an on-delay timer operation (a function that prevents light-blocking operation by the edge of the electric shutter). ■Slim Sensor Head Can Be Installed with One Touch The sensor head for 10m detection adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in, improving workability. ■Built-in Sensitivity Volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-Friendly Design ● High-reliability design that is hardly affected by external light disturbances such as sunlight ● Equipped with an operation indicator light that is convenient for operation confirmation (Red LED: Always on, turns off when detecting)

  • Safety Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared Beam Switch DS-120

Infrared Beam Switch DS-120

The controller section has been miniaturized. The wire can be cut freely, and installation is easy with connector wiring.

■Two power sources according to usage You can choose from two types of power sources, 100V and 200V, depending on the situation of the electric shutter being installed. It is compatible with all types of electric shutters using a near-infrared 1-beam opposing type. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. Additionally, the connection cables are joined by connectors, making wiring easier. ■Response speed switching function included In addition to normal real-time operation, it is also possible to switch to an on-delay timer operation (a function to prevent light-blocking operation by the edge of the electric shutter). ■Slim sensor head can be installed with one touch The sensor head for 10m detection adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in, improving workability. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ● High reliability design that is hardly affected by external light disturbances such as sunlight ● Equipped with an operation indicator light that is convenient for operation confirmation (Red LED: always on, turns off when detecting)

  • Safety Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared Beam Switch DS-220

Infrared Beam Switch DS-220

The controller unit has been miniaturized. The wire can be cut freely, and installation is easy with connector wiring.

■Two power sources for different applications You can choose from two types of power sources, 100V and 200V, depending on the situation of the electric shutter being installed. It is compatible with all types of electric shutters using a near-infrared 1-beam opposing type. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. Additionally, since the connection cables are joined by connectors, threading them has become easier. ■Response speed switching function included In addition to normal real-time operation, it is also possible to switch to an on-delay timer operation (a function that prevents light-blocking operation by the edge of the electric shutter). ■Slim sensor head can be installed with one touch The sensor head for 10m detection adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in, improving workability. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ● Highly reliable design that is hardly affected by external light disturbances such as sunlight ● Equipped with an operation indicator lamp that is convenient for operation confirmation (Red LED: Always on, turns off when detecting)

  • Safety Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heater-equipped infrared beam switch DS-10NH

Heater-equipped infrared beam switch DS-10NH

Equipped with a built-in heater sensor head to reduce malfunctions caused by condensation, freezing, and snow accumulation.

■Features ● Reduces malfunctions caused by "condensation or fogging in low-temperature warehouses or freezing warehouses" or "freezing or snow accumulation in cold regions." ● The sensor head is waterproof, allowing installation in places prone to condensation, such as low-temperature warehouses, freezing warehouses, or semi-outdoor areas. ● The design minimizes heat transfer from the heater to the sensor mounting plate. ● Detection range of up to 10 meters. ● High-reliability design that is hardly affected by external light interference, such as sunlight. ● Equipped with an operation indicator light for convenient operation confirmation (green LED: always on, turns off during detection). ● Compact controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside door engines. ● Connection cables for both the light-emitting and light-receiving parts can be freely cut according to installation conditions. ● Built-in sensitivity adjustment volume allows for optimal sensitivity adjustment based on installation distance.

  • Safety Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-contact switch, exposed type, PF-R5

Non-contact switch, exposed type, PF-R5

It's hygienic because you don't touch the switch directly! In addition to being adjustable to face forward and downward, the beam switch can also be adjusted left and right.

■Features ● It outputs signals by waving your hand without touching the main unit, making it ideal for hygienic environments such as food and pharmaceutical factories and hospitals. ● The angle of the beam switch can be adjusted not only to face forward and downward but also to the left and right. ● The main unit is white, giving it a clean appearance, and the arrow mark clearly indicates where to wave your hand. ● The IP55 design ensures waterproof and dustproof construction. ● It can be mounted on a single switch box (pitch 72.5–83.5mm). ■ Three patterns for the angle of the beam switch: front, downward, and left/right The position of the traditionally fixed beam switch can be changed. ■ White base color enhances cleanliness The main unit is white, enhancing cleanliness and blending well in any environment. ■ The area to wave your hand is prominent The arrow mark makes it easy to identify where to wave your hand.

  • Safety Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-contact switch, exposed type, PF-R1

Non-contact switch, exposed type, PF-R1

Non-contact switch, exposed type, PF-R1

■Features ● The door opens by waving your hand without touching the main unit, making it ideal for places where hygiene is a concern, such as food processing facilities and hospitals. ● Compatible with single-unit recessed switch boxes.

  • Safety Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to switch

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.