3D Printer Product List and Ranking from 288 Manufacturers, Suppliers and Companies

I tried investigating Form3 high-speed material draft resin!

【Mitarepo】Form 3 / Dramatic reduction in modeling time! We thoroughly investigated whether it really becomes one-third!

"Mitarepo" is a series that introduces what can be done using various products with the concept of "I tried doing this!" We will deliver useful information each time from the wide range of product genres handled by System Create. The theme of Vol. 22 is "Thorough Investigation of the High-Speed Draft Resin for Form 3!" This time, we used the high-speed draft resin capable of rapid printing with the light-curing 3D printer "Form 3" to investigate how much time can actually be saved. We printed both the high-speed draft resin (layer pitch 200/100μm) and the standard resin (gray/layer pitch 100μm) and compared the required printing times. We will examine and explain the two features that enable high-speed printing: "large layer pitch" and "short curing time." "How fast can high-speed materials be printed?" "Why is it faster than other materials?" We will provide explanations along with actual model images of the draft resin and verification data on printing times. *You can download the materials from the button below.

Company：システムクリエイト
Price：Other

3D Printer
plastic
Prototype Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Powder Sintering Method 3D Printer 'Fuse 1+ 30W'

A highly versatile SLS (Selective Laser Sintering) system that balances ease of use and quality. Anyone can achieve high-quality modeling. *Demonstrations available.

The "Fuse 1+ 30W" is a powder sintering (SLS) 3D printer from Formlabs (powder 3D printer). It condenses a technology that was mainly high-end and expensive into a compact size, achieving both ease of use and quality. [Features] ■ Packaged Forming System The packaged forming system, enabled by the collaborative operation of the Fuse 1+ 30W and Fuse Sift, allows for efficient and clean operation. ■ Easy Operation for Anyone By loading data into the included software "PreForm," you can simply select the material and determine the model's layout to prepare for printing. ■ New Design Material That Does Not Require Nitrogen The specially designed powder material achieves high quality while maintaining material properties without the need for nitrogen. ■ No Support Needed, Reducing Costs and Time Un-sintered powder supports the model, eliminating the need for support material that would otherwise have to be discarded. ■ An Ecosystem with Virtually Zero Waste By mixing approximately 30% of new powder with un-sintered powder, it can be used as recycled powder. *Please view the PDF data from the download button below.

Company：システムクリエイト
Price：1 million yen-5 million yen

3D Printer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Problem-Solving Materials 3D Data Utilization Edition 20 | 3D Printing of Soft Materials

Cost challenges resolved with large 3D printers! How to reduce costs associated with creating large models? A resource for identifying and solving issues in production sites.

This document is a series that proposes solutions to various challenges faced in production sites, from identifying issues to finding solutions. In the "3D Data Utilization Edition," we will introduce various solutions to manufacturing challenges through the use of 3D data. [Document Overview] As the performance of FDM 3D printers improves, not only the main material PLA but also functional materials such as heat-resistant and high-strength resins have increased. One of these is "soft materials." However, soft materials tend to clog near the print nozzle, and many models cannot print them, making FDM 3D printers generally considered "not good with soft materials." In this document, we will explain the factors that make FDM printers struggle with soft materials, along with the structure of 3D printers, and introduce 3D printers that can resolve these issues. *You can download the document using the button below.

Company：システムクリエイト
Price：Other

3D Printer
Rubber
Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

I tried making a lightweight and strong model with Form 3/3L!

【Mitarepo】Model weight reduction and strength enhancement with Form 3L × Form 3! We tried improving it into a more functional model!

"Mitarepo" is a series that introduces what can be done using various products with the concept of "I tried doing this!" From the wide range of product categories handled by System Create, we deliver useful information each time. The theme of Vol.36 is "We tried enhancing the functionality of the model using a combination of Form 3 and 3L!" In the previously introduced Vol.33, we created a model of a magic hand using Form 3L. However, when we actually assembled the model, we discovered issues such as "the main body is heavy" and "the parts lack strength." Therefore, this time we challenged ourselves to improve functionality through weight reduction and strength enhancement. For the magic hand data, we made two changes: - Main body: Weight reduction through hollowing - Parts: Increased toughness using Tough 2000 resin We printed each using Form 3L and Form 3. "Is it possible to create hollow models with the light curing method?" "What does it look like to combine two models?" We will explain the actual verification process along with comments from our technical staff. *You can download the materials from the button below.

Company：システムクリエイト
Price：Other

3D Printer
3D CAD
plastic

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

How much can we reduce the weight just by changing the materials?

[Mitarepo] Challenging lightweight 3D printing! We tested how much we could reduce weight just by changing the materials!

"Mitarepo" is a series that introduces what can be done using various products with the concept of "I tried doing this!" From the wide range of product genres handled by System Create, we deliver useful information each time. The theme of Vol. 37 is "How much can we reduce weight just by changing materials?" Various types of materials for FDM 3D printers have started to be sold and utilized. Our company also handles a number of materials, but at one point, while going through the TDS, I noticed the "specific gravity" section and suddenly thought, "Wouldn't the weight change if we change the material for the same model?" In this document, we created the same flat model using PLA, which is commonly used in FDM 3D printing, and carbon fiber reinforced nylon material PA12-CF, which has a lower specific gravity than PLA according to the TDS. *You can download the document from the button below.

Company：システムクリエイト
Price：Other

3D Printer
plastic
Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mitarepo[38] How far can powder 3D printers go in fine expression?

[Review] How capable is the powder sintering 3D printer "Fuse1" in expressing fine details? We tried creating a dinosaur skull!

"Mitarepo" is a series that introduces what can be done using various products with the concept of "I tried doing this!" We deliver helpful information each time from the wide range of product categories handled by System Create. The theme of Vol. 38 is "How finely can powder sintering 3D printers express shapes?" In the materials, we create a detailed model of a Tyrannosaurus skull using the powder material "Nylon 12" from the powder sintering 3D printer "Fuse 1," based on CT scan data. We are testing how finely detailed shapes can be reproduced, including the fine surface textures, small protrusions like teeth, and the complex arrangement of small bones inside the skull. Additionally, we are challenging the expression of raised and recessed lettering as one aspect of detail representation. "Isn't it impossible to achieve fine expressions because the powder is sintered and solidified?" "Even if fine shapes can be reproduced, won't they break?" We will explain these points of concern and verification regarding the use of 3D printers, along with comments from our technical staff. *You can download the materials from the button below.

Company：システムクリエイト
Price：Other

3D Printer
Resin processing machine
plastic

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Form3+ adaptable layer pitch that changes the layer thickness of Marsugo.

Malsugo: Speedy printing on gentle slopes with Form 3+! Explaining the amazing changes in "layer pitch."

Marsgo is a document that picks up the functions and features of various products and introduces the "amazing" aspects of them. This time, we will introduce the "Adaptive Layer Height" of the Form 3+, which changes the layer thickness of 3D printing and optimizes it according to the model shape. The biggest feature of the light-curing method "Form 3+" is that the layering marks that shape the three-dimensional object are hardly noticeable! The model is so intricate that it does not give a sense of layer overlap, earning a solid reputation. However, with the "Form 3+", depending on the shape of the model, layering may be noticeable, especially for models with gentle slopes, which can be affected by the layer thickness. Therefore, what we are introducing this time is the "Adaptive Layer Height" of the Form 3+, which changes the layer thickness according to the model shape. It is an amazing feature that places fine layers only where necessary. You do not need to set the layer thickness distribution yourself; it automatically optimizes according to the model shape. With just a simple setting, you won't have to spend a long printing time, and it is a feature that allows you to pursue the smoothness of the model, so please take a look. *You can download the document from the button below.

Company：システムクリエイト
Price：Other

3D Printer
Other CAD
plastic

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

I tried creating a test piece with Fuse1+30W!

【Mitarepo】I tried creating a test piece with Fuse 1 + 30W!

"Mitarepo" is a series that introduces what can be done using various products with the concept of "I tried doing this!" We will deliver useful information each time from the wide range of product genres handled by System Create. The theme of Vol. 49 is "We tried creating a test piece with Fuse 1 + 30W!" In July, the "Fuse 1 + 30W," equipped with high-output laser and nitrogen filling capabilities, and capable of using high-performance materials with excellent rigidity and strength, was announced as a new addition to the Fuse 1 series. Since then, we have received many inquiries. The first unit of the "Fuse 1 + 30W" has arrived at our company. This time, we will conduct setup, various operation checks, test piece creation, and dimensional reproducibility verification in accordance with the inspection process we carry out for each "Fuse 1" upon arrival. We will explain questions and concerns about the new product, such as "What is different from Fuse 1?" and "Are there differences in operation and print quality?" along with images and measurement results. *You can download the materials from the button below.

Company：システムクリエイト
Price：Other

3D Printer
plastic
Prototype Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

I tried FDM printing with a carbon printer.

[Mitarepo] Testing the potential of a carbon composite 3D printer! Tried FDM printing using only PLA! | System Create

"Mitarepo" is a series that introduces what can be done using various products with the concept of "I tried doing this!" We will deliver useful information each time from the wide range of product genres handled by System Create. In Vol. 51, we tested what kind of precision models can be created with PLA printing using the "Anisoprint Composer." The "Anisoprint Composer" is a composite 3D printer that can create models while incorporating carbon fibers. The ability to freely add carbon is attractive, but its frequency of use varies depending on the model's application and cost conditions. There may be those who want to include carbon at critical times but prefer to mainly use general-purpose resin on a daily basis...! Therefore, we conducted printing with PLA to verify what kind of precision models can be created. "Can it be printed beautifully?" "Is there a difference in the models compared to other FDM machines?" We will explain the finishing of the models along with actual images and dimensional measurement results. *You can download the materials from the button below.

Company：システムクリエイト
Price：Other

3D Printer
plastic
Composite Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

I tried painting a model made with Nylon 12!

"Can beautiful painting be done on sculptures?! We tried painting on 'Fuse1' nylon 12!" | System Create

"Mitarepo" is a series that introduces what can be done using various products with the concept of "I tried doing this!" From the wide range of product genres handled by System Create, we deliver useful information each time. In Vol. 52, we painted a model made of nylon 12 using the powder sintering layered 3D printer "Fuse 1." The "Fuse 1," a powder sintering 3D printer, is highly functional and can be utilized in various scenes. It seems that there are increasing cases where prototypes are not only created for shape confirmation but are also actually incorporated as parts, leveraging their characteristics. In this context, we have received requests to paint models used in proposals and presentations to clarify the feel and completion image. Therefore, this time, we painted a sample of nylon 12 printed with the Fuse 1. "Can I paint it as I imagined?" "What will the texture be like?" We will explain the painting process and the product's texture along with images, addressing any questions or concerns. *You can download the materials from the button below.

Company：システムクリエイト
Price：Other

3D Printer
plastic
Prototype Services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

I tried creating a new material with Fuse 1 +30W!

[Mita Repo] Tried 3D printing the new powdered material 'Nylon 11CF' blended with carbon fiber using Fuse 1+ 30W! | System Create

"Mitarepo" is a series that introduces what can be done using various products with the concept of "I tried doing this!" From the wide range of product genres handled by System Create, we deliver useful information each time. In Vol. 54, we created test pieces using the new material "Nylon 11CF" for the SLS 3D printer "Fuse 1 +30W" and examined its dimensional reproducibility. Carbon fiber reinforced resin, which achieves excellent strength and heat resistance while being lightweight, is utilized in various applications across industries and is also expanding in the 3D printing industry. In this context, Formlabs announced the carbon fiber reinforced material "Nylon 11CF" as a new material for the SLS 3D printer "Fuse 1 +30W." Therefore, we quickly created test pieces used for inspection upon arrival. Are there differences compared to other materials? How accurately can dimensions be reproduced? We explain questions and points of interest regarding Nylon 11CF, along with images and measurement results. *You can download the materials from the button below.

Company：システムクリエイト
Price：Other

3D Printer
plastic
Composite Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

I tried removing the powdered material remaining in the hollow part of the mitarepo!

【Mitarepo】I tried removing the residual powder material inside the model created with an SLS method 3D printer! | System Create

"Mitarepo" is a series that introduces what can be done using various products, based on the concept of "I tried doing this!" From the wide range of product categories handled by System Create, we deliver useful information each time. In Vol. 57, we used the SLS method 3D printer "Fuse 1+30W" to create a model with a complex internal shape and tested whether we could cleanly remove the powder left inside. The SLS method 3D printer has the advantage of being able to create support-free structures, unlike other printing methods. Therefore, it can produce complex shapes that are difficult to achieve with other methods. However, since the uncurled powder laid out functions as a substitute for support, hollow areas may remain filled with powder. Nevertheless, the powder left inside should be removable with the SLS method. In this document, we challenge the removal of powder remaining inside the model! We will thoroughly check the invisible interior using a CT scanner. We will explain whether it is truly possible to cleanly remove the powder material left inside, along with the removal process and CT scan images. *You can download the document using the button below.

Company：システムクリエイト
Price：Other

3D Printer
plastic
Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

I tried combining metals to create a unified sculpture!

[Mitarepo] Layering different metals with a metal 3D printer! We tried combining materials for integrated manufacturing! | System Create

"Mitarepo" is a series that introduces what can be done using various products with the concept of "I tried doing this!" We deliver useful information each time from the wide range of product genres handled by System Create. In Vol. 59, we tried creating a model by combining different metals using "2CREATE." The compact metal printer is easy to handle and allows for easy material changes, which is a great feature. With this, it might be possible to change materials midway! Aren't you interested in creating metals that are fused together from different types? So, in between prints, we changed materials and created a model made from two types of materials! This is the first attempt to utilize the flexibility of material selection in 2CREATE and the characteristics of a 3D printer that sinters metal powder with a laser. "Doesn't changing materials in a metal printer take a long time?" "Is it really possible to combine metals in 3D printing?" We will explain the flow of material changes and the finish of the model along with actual images. *You can download the materials from the button below.

Company：システムクリエイト
Price：Other

3D Printer
Other metal materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mitarepo [64] Tough 2000 Checking the tightening torque of the resin!

【Mitarepo】How much torque can it withstand with the work created in Form 3+!? I tried tightening it with a Helicoil!

"Mitarepo" is a series that introduces what can be done using various products with the concept of "I tried doing this!" We deliver useful information each time from the wide range of product genres handled by System Create. In Vol. 64, we used a type of material from the Form 3+, the Tough 2000 resin, to incorporate a helicoil and test its tightening. The Form 3+ is well-received because it allows users to choose materials from a diverse lineup according to their applications. This time, we are focusing on "Tough 2000 resin," which has properties similar to ABS and excels in strength and impact resistance. Common inquiries regarding this material include: "Can it be tapped?" "Can a helicoil be incorporated?" These are the two main questions. Therefore, this time we performed tapping on a workpiece made from Tough 2000 resin to verify how much tightening torque it can withstand. In the documentation, we created three types of female threads, tightened the screws, and explained the torque measurements with numerical data and images. *You can download the materials from the button below.

Company：システムクリエイト
Price：Other

3D Printer
plastic
Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

I soaked the Mita Repo [67] Rigid 10K in a chemical solution and examined the changes!

[Mitarepo] Can the model withstand chemicals? We immersed the Form 3+ rigid 10K in chemicals to investigate the changes! | System Create

"Mitarepo" is a series based on the concept of "I tried doing this!" where we introduce what can be done using various products. From the wide range of product categories handled by System Create, we deliver useful information each time. In Vol. 67, we investigated what changes occur when one of the materials for the Form 3+, "Rigid 10K Resin," is immersed in chemicals! The "Form 3+" has received positive feedback for allowing users to select materials according to their applications from a rich lineup. The "Rigid 10K Resin" featured this time is noted for having the highest rigidity among the Form 3+ resins, but it is also claimed to have excellent chemical resistance. However, there is little information related to chemical resistance for 3D printer models, leading to an increase in inquiries such as, "Will it dissolve or crack?" and "Will this chemical have any effect?" In the materials, we prepared three types of chemicals and immersed test pieces for 24 hours to explain what effects they experience, along with numerical data and images showing the changes. *You can download the materials from the button below.

Company：システムクリエイト
Price：Other

3D Printer
plastic
Chemicals

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

3D Printer Product List and Ranking from 288 Manufacturers, Suppliers and Companies

3D Printer Manufacturer, Suppliers and Company Rankings

3D Printer Product ranking