We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Biaxial Testing Machine.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Biaxial Testing Machine Product List and Ranking from 4 Manufacturers, Suppliers and Companies

Biaxial Testing Machine Product List

1～5 item / All 5 items

Displayed results
Biaxial testing machine

Biaxial testing machine

By using appropriate material property values, the experimental results and analysis results are almost consistent!

To improve the analysis accuracy of rubber, it is important to define appropriate material properties. Since there are limitations to the material properties obtained from uniaxial tensile tests, biaxial tensile tests, which provide suitable material properties for rubber CAE analysis, are effective. In the case of rubber CAE analysis, it is evident that the strain distribution from the biaxial test (pure shear) is closer to the actual measurements than that from the uniaxial test. In other words, to enhance the accuracy of CAE analysis, it is recommended to use the material properties obtained from biaxial tests (pure shear).

  • Testing Equipment and Devices
  • Rubber
  • Structural Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Large 2-axis testing machine for seismic isolation rubber 'MCS Series'

Large 2-axis testing machine for seismic isolation rubber 'MCS Series'

No special pit is required due to the low-floor design! We will calculate the constants necessary for evaluating laminated seismic isolation rubber.

The "Large 2-Axis Testing Machine for Seismic Isolation Rubber MCS Series" is a civil engineering and construction testing device used to evaluate "laminated seismic isolation rubber" utilized in buildings and bridges. The device applies vertical loads to the laminated seismic isolation rubber while applying horizontal (shear) loads to obtain displacements and calculate necessary constants for evaluation. It features a simple configuration consisting of the main testing machine, hydraulic unit, control panel, and control PC. 【Features】 ■ Simple configuration ■ Low-profile design eliminates the need for a dedicated pit ■ User-friendly dedicated software ■ Compatible with 10MN and 3MN classes *For more details, please refer to the PDF materials or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Measurement of frictional force and horizontal/vertical vibration characteristics - Tensile stress biaxial testing machine.

Measurement of frictional force and horizontal/vertical vibration characteristics - Tensile stress biaxial testing machine.

Using hydraulic actuators with precision control functions! Evaluation tests for various mechanisms and devices are possible.

The "2-axis testing machine" is a load testing machine that can simultaneously apply horizontal and vertical loads. By using a hydraulic actuator with precision control functions, it measures friction forces and the vibration characteristics in horizontal and vertical directions. The test specimen is placed on a horizontal sliding table, and by applying load with a vertical loading mechanism while driving the horizontal sliding table, it is possible to verify the friction, rebound force, and stiffness of the test specimen. 【Features】 ■ Composed of a horizontal sliding table and a vertical loading mechanism ■ Capable of evaluating various mechanisms and devices such as anti-vibration rubber, fluid bearings, and pneumatic cylinders ■ Manufactured using various techniques such as strength analysis, can fabrication, precision assembly, etc. ■ Capable of producing various measuring devices, not limited to this type of testing machine *For more details, please refer to the PDF document or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Large 2-axis testing machine for seismic isolation rubber "MCS Series"

Large 2-axis testing machine for seismic isolation rubber "MCS Series"

Low-floor type! A testing machine for evaluating "laminated seismic isolation rubber" used in buildings and bridges.

Matsuda Manufacturing's "MCS Series" is a large two-axis testing machine for evaluating "laminated seismic isolation rubber" used in buildings and bridges. With a simple configuration of the "testing machine body," "hydraulic unit," "control panel," and "control PC," it is low-profile, eliminating the need for a dedicated pit. We provide user-friendly dedicated software. 【Features】 ■ For evaluating laminated seismic isolation rubber ■ Simple configuration ■ Low-profile design ■ Dedicated software available *For more details, please refer to the PDF document or feel free to contact us.

  • Vibration Testing
  • Strength Testing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Large 2-axis testing machine for seismic isolation rubber "MCS Series"

Large 2-axis testing machine for seismic isolation rubber "MCS Series"

No special pit is required due to the low-floor design! Evaluating "laminated seismic isolation rubber" used in buildings and bridges!

The "MCS Series" is a large two-axis testing machine for seismic isolation rubber, featuring a simple configuration consisting of the testing machine body, hydraulic unit, control panel, and control PC. It evaluates "laminated seismic isolation rubber" used in buildings and bridges. Its low-profile design eliminates the need for a dedicated pit. With a vertical load of 10 MN and a horizontal load of ±3 MN, it comes with user-friendly dedicated software. 【Features】 - Simple configuration of the testing machine body, hydraulic unit, control panel, and control PC - Low-profile design eliminates the need for a dedicated pit - User-friendly dedicated software - Vertical load of 10 MN and horizontal load of ±3 MN *For more details, please refer to the PDF document or feel free to contact us.

  • Testing Equipment and Devices
  • Vibration Testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.