Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 151 items
A long-selling series boasting top-level cutting performance and high durability.
High-performance water-soluble metalworking oil that boasts top-level machinability and high durability, chlorine-free and plant oil-based.
Grindex Series (Water-Soluble)
This product does not contain any of the following: sulfur, chlorine, zinc, phosphorus-based extreme pressure additives, boron compounds, nitrites, nitrite derivatives, secondary amines, diethanolamine, nitrosamines, heavy metals, PCP (pentachlorophenol), PCB, PCT, TCDD, or any other dioxin-containing substances.
Buscomil HFP (High Flash Point) Series
High Flash Point Series - Ester-Based High-Performance Metalworking Oil ■ Ester Oil Base - Cleaner working environment with reduced oil mist ■ Excellent Lubrication - Superior cutting performance, extended tool life, improved surface finish ■ High Flash Point - Both the Buscomill HFP series and Buscomill 42 have a flash point of over 250°C 【Main Products】 ★ Buscomill 18HFP Viscosity (40°C) [mm²/s]: 18 Flash Point (°C): 255 ★ Buscomill 29HFP Viscosity (40°C) [mm²/s]: 29 Flash Point (°C): 264 ★ Buscomill 42 Viscosity (40°C) [mm²/s]: 42 Flash Point (°C): 250
Amazing cutting performance that accommodates all processing conditions.
Increased cutting speed leads to improved productivity. Extended tool and cutter life. Enhanced finishing accuracy. Reduction in defective products. Decrease in waste oil due to deterioration and alteration of lubricants. This product contributes to cost reduction, rationalization, and quality improvement.
Chlorine-sulfur-based cutting oil for processing difficult materials such as nickel alloys. High concentration of additives is blended.
The Chemiron Cut Neo SC321H demonstrates its power in the machining of difficult-to-cut materials such as Inconel and Incoloy, and of course, you can also rely on it for SUS machining. It enables improved chip removal and extended tool life in processes that are challenging with non-chlorinated cutting oils. With a high concentration of various additives, it maintains machinability over a long period. Additionally, as a mist-suppressing cutting oil, it improves the working environment. 【Features】 ■ Chlorine-sulfur based cutting oil (yellow transparent) ■ Exhibits cutting performance in difficult-to-cut material machining ■ Long life ■ Mist-suppressing cutting oil ■ Proven results in automatic lathe machining *For more details, please refer to the PDF document or feel free to contact us.
Low viscosity high flash point cutting oil! Due to its low viscosity, it has less stickiness and can reduce the amount taken out. It maintains stable processing with minimal viscosity changes even at low temperatures!
Low viscosity specified combustible cutting oil. Compatible with iron, SUS, aluminum, and more. Used in CNC lathes, machining centers, and other processing machines. Complies with various regulations (PRTR, RoHS, REACH). 【Features】 ■ Low viscosity, specified combustible material. ■ Can be used to improve storage quantity issues. ■ Excellent lubrication reduces tool wear. ■ Minimal viscosity change even at low temperatures, allowing stable processing in cold regions. ■ Special additives suppress oxidation degradation, resulting in less stickiness inside and outside the machine. ■ Due to its low viscosity, it helps reduce the amount of chips carried away. *For more details, please refer to the PDF document or feel free to contact us.
Non-hazardous oil-based cutting oil! Recommended for fire prevention measures.
The non-hazardous oil-based cutting oil "Super Cut 250 Series" has a flash point of 250°C or higher, classifying it as a non-hazardous material (flammable liquid) under fire safety laws. The explosion-proof specifications for storage warehouses and various notifications to the fire department are significantly relaxed compared to hazardous materials of Category 4 (Class 3 and 4 petroleum products). Additionally, since it is made from plant oils and synthetic oils, it is biodegradable, effective for smoke prevention, and contributes to environmental conservation. It is also gentle on the skin, allowing for safe use. For more details, please download the catalog.
Aerosol type cutting oil.
"Super Cut" does not contain chlorine, sulfur, or any solvents or heavy metals, so you can use it with confidence.
Oil-based cutting oil for automatic lathes, NC, MC machining, and brush application.
BCN-CF is a medium-viscosity cutting oil formulated with carefully selected raw materials, primarily developed for machining iron-based and nickel-chromium-based metals. It is designed for use in automatic machines, NC, and MC machines, circulated by pumps, and demonstrates excellent cutting performance, particularly in the machining of stainless steel and titanium, achieving significant tool life extension and precise dimensional accuracy in the finish.
It is a cutting oil that is friendly to people and the Earth's environment because it does not contain chlorine or sulfur.
BCN-32 CF is a general-purpose oil-based cutting oil that can be widely used for machining difficult materials such as stainless steel, as well as ferrous metals, aluminum, and non-ferrous metal alloys like copper.
ST&T Cutting Oil for Brush Application and Mist Supply, highly biodegradable, friendly to humans and the environment, and chlorine-free.
ST&T Cutting Oil for Brush Application and Mist Supply for Stainless Steel & Titanium This product is highly biodegradable and very friendly to humans and the Earth's environment. It is chlorine-free and ideal for machining difficult materials such as stainless steel, chromoly, titanium, Inconel, and die steel. Features: - The components for stainless steel & titanium are all derived from plant extracts, making them highly biodegradable. In the unlikely event that it flows into rivers, 94% of the components will biodegrade within 21 days (CEC L-33-A-94 test). It contains no chlorine, sulfur, phosphorus, mineral oils, solvents, or heavy metals, making it a cutting oil that is very friendly to the human body and the Earth's environment.
Super Tap CF (chlorine-free) stainless steel, titanium, Inconel cutting oil for difficult-to-machine materials Rubisil
Rubisil Super Tap CF (Chlorine-Free) ● Mainly for taps and drills, it reduces tool chatter and breakage when machining stainless steel and titanium, significantly extending tool life. ● The threads created during tapping do not get stripped, allowing for the production of high-precision products. ● It can be used for machining all metals, especially effective for difficult-to-machine materials like stainless steel and titanium. It also has a proven track record in machining die steel and other mold materials.
Cutting oil that is less likely to smell! This emulsion cutting oil with nano carbon is suitable for various workpieces from iron to aluminum!
The "NanoLubka EMS-40" from Shion Corporation is a water-soluble cutting oil of the emulsion type, featuring high lubrication and long life due to the incorporation of nanocarbon. Since it does not use reactive extreme pressure agents (chlorine, sulfur, phosphorus-based), it significantly contributes to environmental improvement. The nanocarbon acts as an extreme pressure agent, providing high lubrication and enabling processing at levels comparable to cutting oils that contain extreme pressure agents. It can be used for various machining machines and materials, including iron, cast iron, copper, aluminum, as well as for high-load and high-precision machining of high-hardness and difficult-to-cut materials. Additionally, because it contains nanocarbon, it is resistant to decay and has a long lifespan, contributing to carbon neutrality.
Excluded from hazardous materials under the Fire Service Act! Cutting oil that does not contain PRTR-designated chemical substances.
"Chemicut F-920" is a high flash point oil-based cutting oil designated as a "flammable liquid" under the Fire Service Act. It is excluded from the hazardous materials category in storage facilities such as oil warehouses and tanks in production equipment, allowing for more flexibility regarding the designated quantities under the Fire Service Act. Additionally, it does not contain PRTR-designated chemical substances or chlorine-based extreme pressure agents, making it a product that aligns with the spirit of ISO 14000s. Its safety for human health is also extremely high. 【Features】 - Generates less mist due to its synthetic ester-based base oil - Low odor type improves the working environment - Non-chlorinated, preventing rust caused by decomposed chlorine - Extends tool life and increases productivity - Improves the finish surface For more details, please contact us or download the catalog.
I won't let you say it smells greasy anymore.
Trading Company: This company has a nice scent, doesn't it? President: Right? Actually, it's the smell of cutting oil. Trading Company: Really!? I had the impression that cutting oil is sticky, white, and smelly. President: We used to be like that too. That's why even when we hired people, they would quit right away. It was tough for both the site and management with the double punch of recruitment costs and labor shortages. Trading Company: I didn't know that. Because whenever I come here, there are always young people who are energetic, and even female operators, which makes me envious. President: One day, I realized that the smell of cutting oil was equated with the company's image, so I decided to change the cutting oil. Trading Company: Is that this purple one? President: Yes. It looks nice and smells good, right? Since we switched to this cutting oil, no one has quit. Thanks to that, our production efficiency has increased. Trading Company: It's just cutting oil, but it's also cutting oil. President: This cutting oil manufacturer aims to transform the Showa era's 3K "Smelly, Dirty, Dangerous" into the Reiwa era's 3K "Clean, Comfortable, Cool," and improve the image of the manufacturing industry. Trading Company: That's great! Sanrin Koyu is an interesting company.
Management is important for performance! Here are the usage methods and precautions for water-soluble cutting oils.
Chubu Clean Co., Ltd., which handles automatic coolant liquid dilution supply systems, introduces the usage and precautions for water-soluble cutting oil. Water-soluble cutting oil is used by diluting it with water, which eliminates the risk of fire and gradually expands its application range, including high-speed cutting and automation of work processes. However, there are management-related precautions to consider, and proper liquid management is crucial to fully utilize the performance of the coolant liquid. 【Precautions】 ■ Dilution with water ■ Supplementing cutting oil ■ Prevention of spoilage and replacement ■ Management of coolant liquid concentration * For more details, please refer to the external link page or feel free to contact us. * The PDF materials introduce the automatic coolant liquid dilution supply system "FAM20A."
We offer a variety of cutting oils and lubricants that contribute to hazardous material quantity management and fire prevention measures.
We handle various cutting oils and lubricants that do not fall under hazardous materials. Many oil products are classified as hazardous materials of Category 4, and their storage quantities are strictly regulated by the Fire Service Act. According to the Fire Service Act, products with a flash point of 250°C or higher are classified as non-hazardous materials (designated combustible materials, flammable liquids), and the storage quantity regulations are relaxed. Additionally, we offer flame-retardant oils that not only avoid the Fire Service Act but also actually reduce fire risks. 【Products We Handle】 ■ Designated combustible non-water-soluble cutting oil "Eagle Cut UF Series" ■ Designated combustible bearing oil "Spindle UF-15" ■ Water-containing cutting oil "Eagle Cut W-303" ■ Flame-retardant hydraulic oil *For more details, please refer to the PDF materials or feel free to contact us.
![[Micro Cut 240PF Introduction Case] U Manufacturing Company](https://image.mono.ipros.com/public/product/image/f66/2000421160/IPROS14672531045319561675.jpg?w=280&h=280)
New oil purchase cost reduction rate of 24%! By extending the fluid exchange cycle, waste fluid disposal costs are also reduced.
We would like to introduce a case study from U Manufacturing, which implemented "Microcut 240PF." The company owns about 100 machining machines and was using 8 to 10 DM of water-soluble cutting oil per month, but faced issues with reducing the costs of purchasing new oil. As a solution, they switched to "Microcut 240PF (anti-corrosion)" and reduced the costs of new oil purchases through extended fluid life. The extension of the fluid replacement cycle also led to a reduction in waste fluid disposal costs. [Case Study] ■ Customer's Issue - Faced the problem of reducing new oil purchase costs ■ Improvement Measures - Switched to Microcut 240PF (anti-corrosion) - Reduced new oil purchase costs through extended fluid life *For more details, please refer to the PDF document or feel free to contact us.
オイル選定で押さえておきたい基本を解説。切削加工現場のトータルコスト削減・生産性向上に
本資料では、切削油剤の改善をテーマに、油剤コストと工具寿命の関係性、 消防法対応と生産性を両立する切削油、腐敗対策方法などをまとめて紹介しています。 適切な切削油剤の使用は、加工性能の向上や工具寿命の改善によるコストダウンに加え、 腐敗などのクーラントにまつわるトラブルを解決し、安定した生産の実現に貢献します。 特に、工程の自動化が進む現場では、稼働停止を防ぐ点でも重要です。 切削加工現場のトータルコストダウン・生産性向上を目指す方は、ぜひご覧ください。 【掲載内容】 ■水溶性と不水溶性の違い ■工具寿命と潤滑性 ■消防法対応と加工性能の両立 ■工具寿命についての疑問 ■水溶性の濃度設定 ■水溶性切削油の腐敗対策 ■液の腐敗度合いの把握 ■具体的な腐敗対策 ■油剤交換頻度の改善 ※詳しくは＜カタログをダウンロード＞より資料をご覧ください。お問い合わせもお気軽にどうぞ。
Aircraft parts, 64 titanium, difficult-to-machine materials, heat-resistant steel!
The "Hangstarfar S-787" is a high-performance water-soluble cutting oil that maintains long-term potential and can be used with minimal replenishment. It combines lubrication comparable to emulsions with cooling properties superior to solutions. Developed for airport machine materials, it is suitable for machining difficult materials such as aluminum alloys, nickel alloys, and titanium alloys. 【Features】 ■ Balances lubrication and cooling ■ Maintains machinability over a long period ■ Can be used with minimal replenishment ■ Suitable for machining difficult materials ■ No physical issues such as skin irritation have occurred *For more details, please refer to the catalog or feel free to contact us.
Soluble cutting oil suitable for a wide range of materials and processing!
The "Micro Cut 700RF" is a fully synthetic oil that exhibits lubrication comparable to that of emulsions and is free of mineral oils. It has minimal discoloration and corrosion on aluminum and copper alloys, excellent foam suppression, and is suitable for high-pressure lubrication systems. Additionally, it does not fall under the PRTR law and is designed with consideration for skin disorders (such as hand dermatitis), making it a user-friendly product for operators. 【Features】 ■ Free of mineral oils ■ Not subject to the PRTR law ■ Minimal discoloration and corrosion on aluminum and copper alloys ■ Reduced liquid adhesion to machines and workpieces ■ Decreased liquid carry-out, leading to reduced replenishment amounts *For more details, please refer to the catalog or feel free to contact us.
[Must-see for those in Ibaraki, Tochigi, Fukushima, and Chiba] Synthetic solution-type cutting oil compatible with general work, stainless steel, and heat-resistant steel!
"Micro Cut 2010H" is a high-performance synthetic solution type cutting and grinding oil that is oil-free and PRTR-free. By employing special lubricants, it demonstrates excellent machinability, cooling properties, and rust prevention. Additionally, it has low stickiness, excellent washability, and does not worsen the working environment. Furthermore, its superior antibacterial effect extends the coolant's lifespan and allows for the reduction of waste liquid volume and replenishment frequency. 【Features】 ■ Excellent machinability, cooling properties, and rust prevention ■ Prevents deterioration of the working environment ■ Excellent separation of mixed oils and chips ■ Long-lasting liquid transparency ■ Excellent defoaming properties, suitable for high-pressure lubrication processing *For more details, please refer to the catalog or feel free to contact us.
A comprehensive catalog of cutting oils for metal processing, including non-chlorinated cutting oils, machining oils, rust prevention oils, and many others.
This is the comprehensive catalog of Shinwalbutech, which manufactures and sells cutting oils for metal processing. It features a variety of products including non-chlorinated cutting oils, non-chlorinated cutting oils for CNC, non-chlorinated plastic processing oils, tapping oils, rust prevention oils, and more. In this catalog, we provide the viscosity, specific gravity, flash point, copper plate corrosion, and a brief description of various cutting oils, making it easier to compare them. [Contents] ■ Non-chlorinated cutting oils ■ Non-chlorinated punching oils ■ Processing oils for miscuts ■ Tapping oils ■ Hydrocarbon-based cleaning liquids, etc. *For more details, please refer to the PDF document or feel free to contact us.
![[Suggestion] Are you holding too much dangerous oil?](https://image.mono.ipros.com/public/product/image/189/2000350551/IPROS4577243871312688969.jpg?w=280&h=280)
More than half of national companies exceed hazardous material storage limits! Here is a proposal from Shinwalbutech as a countermeasure.
Until now, when it came to oil storage, we only counted the inventory in drums and cans. However, recently there has been a trend to consider the total storage amount as the inventory plus the oil inside the machines (hydraulic oil, sliding surface oil, gear oil, cutting oil). Generally, commonly used lubricants (hydraulic, bearing, sliding) and cutting oils (only oil-based) are mostly third-class petroleum products, with a storage amount equivalent to 10 drums of 2000L. Furthermore, if kerosene or hydrocarbon-based cleaning liquids are used for fuel or cleaning, the total becomes even more significant. Therefore, we would like to introduce two types of fourth-class petroleum products that triple the storage amount, as well as the 5000 series that falls under designated combustible materials with no regulations. I believe it may be difficult to understand with just a simple explanation. We have the experience and know-how, so please feel free to contact us directly by phone or email. 【Two proposals as countermeasures】 ■ Make it water-soluble ■ Non-water-soluble cutting oil ・ Fourth-class petroleum (6000 series) ・ Designated combustible materials (5000 series) *For more details, please feel free to contact us.
Environmentally friendly product (chlorine-free)! Universal type cutting oil.
"Saskat SUS-365" is a cutting oil suitable for tapping, threading, drilling, reaming, and broaching of materials such as stainless steel, aluminum, copper, and titanium alloys. It can be used for most cutting and grinding operations. Its strong penetration and high lubrication properties increase cutting speed and improve work efficiency. 【Features】 ■ Does not contain chlorine-based extreme pressure agents ■ Reduces tool wear and extends tool life ■ Improves finish quality and enhances dimensional accuracy ■ Usable for band saws and metal saws as well *For more details, please download the PDF or contact us.
Suitable for most cutting and grinding processes! Environmentally friendly product (chlorine-free, plant-based oil)
The "Saskat NS-500" is an environmentally friendly cutting oil (chlorine-free and plant-based) that enhances cutting speed and improves work efficiency due to its strong penetration and high lubrication properties. It can be used for lubrication in tapping, threading, drilling, reaming, broaching, metal sawing, band sawing, and other machining of difficult-to-cut materials such as stainless steel, aluminum, and titanium alloys. 【Features】 ■ Usable for most cutting and grinding processes ■ Safe as it does not contain chlorine-based additives ■ Reduces tool wear and extends tool life ■ Improves surface finish and dimensional accuracy, and can be used safely as it is plant-based *For more details, please download the PDF or contact us.
High processing performance despite being chlorine-free. Compatible with difficult-to-machine materials from iron to stainless steel. Increases cutting speed and enhances work efficiency!
"StenCut F" is a chlorine-free cutting oil that achieves high processing performance without using chlorinated paraffin. It significantly reduces the generation of oil mist and smoke, contributing to an improved working environment. The discharge of chips is smooth, with minimal burrs, edge tears, and seizing prevention. It provides a good finish and improves dimensional accuracy. There are no unpleasant odors from sulfur-based additives, making it easier to work with, and there is no concern about dioxin generation, eliminating the hassle of separate disposal. 【Features】 ■ Compatible with iron materials, stainless steel, aluminum, aluminum alloys, titanium, etc. ■ Measures for cutting edge configuration are possible ■ Extends tool life ★ The first 30 applicants will receive a sample! If you wish to receive one, please contact us with "Sample Request." *For more details about the product, please refer to the PDF document.
Extended shelf life against decay and significant reduction in supply quantity! Well-received for reducing stickiness and suppressing mist.
**Awards** - Received the Technical Award at the 43rd Precision Engineering Society - Received the Grand Prize at the 21st 2024 "Super" Monozukuri Parts Awards - Received the Minister of the Environment Award at the 24th Green and Sustainable Chemistry Awards **Product Overview** The "Alpha Cool NV Series" is a water-soluble cutting oil that balances the improvement of the working environment with increased productivity. It is particularly well-received for significantly reducing stickiness on equipment and products, as well as for its effectiveness in suppressing mist and foul odors. Additionally, it has successfully reduced the amount of carry-off. In actual workplaces, it has been confirmed that the consumption of the concentrate has been reduced by an average of 40%. Along with improving the working environment, it contributes to reducing both usage and disposal amounts, thereby enhancing productivity on-site. The NV series offers two types: an emulsion type that accommodates a wide range of processing from non-ferrous to alloy steel, and a soluble type specialized for iron processing. **Features** - Improved resistance to spoilage, extending performance maintenance time by over 250% - Reduced carry-off, cutting concentrate consumption by 40% - Contribution to the environment and reduction of disposal costs - Enhanced safety for workers due to reduced oil mist *For more details, please refer to the PDF document or feel free to contact us.*
Contributes to the reduction of supply volume, waste volume, and oil change work with long service life. It is also possible to reduce fog, odor, and stickiness. Options are available for difficult-to-cut materials.
Our company offers a variety of "water-soluble cutting oils" that are resistant to corrosion. The "NV Series" has completely re-evaluated the composition of surfactants, achieving significantly longer service life. It reduces usage and disposal amounts, as well as the need for replenishment, while also minimizing unpleasant odors and stickiness. The "Master Cool Series" ensures that components easily reach the cutting edge even when machining difficult materials, demonstrating high cooling performance and lubrication even at high temperatures. This enables longer tool life. ★ We are currently offering materials that introduce our lineup and examples of improvements achieved through implementation. Please view the materials via "PDF Download." Feel free to contact us with any inquiries. 【Case Studies】 ■ Automotive parts manufacturer: Reduction of concentration and replenishment of raw liquid, reduction of mist ■ Aircraft parts manufacturer: Prevention of overflow and air entrapment during high-pressure discharge ■ Semiconductor equipment manufacturer: Compatibility with various work materials, reduction of raw liquid replenishment and replenishment work ■ Industrial parts manufacturer: Improvement of tool life, reduction of unpleasant odors ■ Food and medical parts manufacturer: Reduction of usage, reduction of labor and costs for coolant management
By using Idemitsu's unique formulation technology, we achieve both cost reduction and improvement of the working environment! We will explain a case of approximately 1 million yen per year in cost savings and a 40% reduction in supply volume.
Idemitsu Kosan's water-soluble cutting oil "Alpha Cool NV Series" has completely re-evaluated the composition of surfactants, including the adoption of non-volatile amines. Thanks to our unique formulation technology, we achieve both cost reduction and improvement of the working environment! The effective ingredients are less likely to disappear, and we have extended the shelf life against spoilage. In workplaces that have adopted the NV series, the amount of concentrate replenishment has been reduced by an average of about 40%. 【Recommended for workplaces with the following concerns】 "I want to promote carbon neutrality initiatives." "I am looking for ways to reduce costs (improve productivity)." "I am struggling with odor issues due to spoilage." "I am facing deterioration of the working environment due to stickiness." *We are currently offering a collection of improvement case studies summarizing adoption examples for free. For detailed information, please refer to the materials available in the "Catalog Download." *Sample provision and demonstrations (by consultation) are also possible. Please feel free to contact us for more details.
