Fence Guard Wide FG-203
Fence Guard Wide FG-203
■Features ● Barrier to prevent climbing over fences and walls ● Can be installed in unit units ● Made of rust-resistant SUS material
- Company：セキュリティハウス
- Price：Other
Electric lock Product List and Ranking from 43 Manufacturers, Suppliers and Companies
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
Electric lock Manufacturer, Suppliers and Company Rankings
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
- セキュリティハウス Okayama//Consumer Electronics
- Shindengen Mechatronics Co., Ltd. Saitama//Machine elements and parts
- タカノ Nagano//Machine elements and parts
- 4 東洋エレクトロン 東京支店 Tokyo//Consumer Electronics
- 5 タートル工業 Ibaraki//Industrial Electrical Equipment
Electric lock Product ranking
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
- FCU control device remote switch 'K99-TK3' 東洋エレクトロン 東京支店
- Voltage-free contact output unit (USB connection type) 'TUSB-S01SW' タートル工業
- Seat Occupancy Confirmation Switch (Digital Gap Switch) GPS3 Series
- 4 Introduction to the actuator | Rotary type 'Rotary Solenoid'! Shindengen Mechatronics Co., Ltd.
- 5 Electric Lock Control Panel System "C-3830 Series" アート
Electric lock Product List
166～180 item / All 759 items
Displayed results
Digital Thermo FTB-8
For monitoring the internal temperature of refrigerators and freezers, as well as the temperature in server rooms!
■ When the set storage temperature exceeds the lower or upper limit due to some trouble, an alarm signal will be output. It is also possible to report to a remote location using a reporting device, ensuring the protection of important food and pharmaceuticals 24 hours a day. ■ Up to 8 temperature monitoring points available You can connect up to 8 temperature sensors (FTB-E52). *FTB-E52 is sold separately. ■ Monitoring temperature range The monitoring temperature range is from a lower limit of -40°C to an upper limit of +60°C. Each channel can be set in 1°C increments. ■ Channel-specific settings Monitoring presence, temperature, and output delay timer can be set for each channel regarding upper and lower temperature limits. ■ Easy-to-understand status display The status of each channel is displayed, allowing you to see the status of all channels at a glance. ■ Alarm time settings The output time during an alarm and the duration of the buzzer can be set continuously (until reset) or in 1-second increments from 0 to 99 seconds. ■ Main installation locations - Food refrigeration and freezing units in supermarkets, etc. - Pharmaceutical storage rooms in hospitals and universities, etc. - Server rooms
- Company：セキュリティハウス
- Price：Other
Alarm Signal EXF-2SL
We monitor illegal dumping by combining various sensors and systems, and we deter it with voice messages or alarm sounds (sirens) and rotating lights.
■Main Features ● When the separately attached sensor or system detects a person or vehicle, a voice message or alarm sound is triggered, and the rotating light activates. ● Thanks to the built-in day/night detection switch, when it becomes sufficiently dark, the message "Monitoring for Illegal Dumping" is illuminated by fluorescent light. ● The rotating light spins 140 times per minute, serving as a deterrent and alert. ● The pole is sold separately.
- Company：セキュリティハウス
- Price：Other
Audio Threat Light EXF-A1-SVL
The human detection sensor detects human bodies and vehicles, and intimidates them with voice messages and lights.
■Main Features ● Monitors illegal dumping in places with 100V power supply, such as factories, plants, temples, shrines, and parks, and intimidates with voice messages and lights. ● The detection area of the human sensor is 12×13m. ● Messages can be easily recorded by simply speaking into the built-in microphone. ● The light is equivalent to a 100W beam lamp. ● Pole mounting brackets are optional. (EP-01) ● Poles and installation work are separate. ● When used in conjunction with the outdoor dummy camera VDC-430, the deterrent effect is enhanced. ● Equipped with day/night detection functionality.
- Company：セキュリティハウス
- Price：Other
Multipurpose intimidation device, lead wire type, EXF-CV12
Integrating the three major functions of sound, light, and camera! For suppressing illegal activities, monitoring, and guidance outdoors.
■Enhanced deterrent effect through three major functions: sound, light, and camera The human detection sensor detects people and vehicles, deterring them with a voice message and a flashlight. Additionally, the integration with a dummy camera is expected to provide a psychological deterrent effect. *Note: The dummy camera is for deterrent purposes and cannot record actual footage.* ■Easy recording and playback of voice messages You can record messages of up to 16 seconds by simply speaking into the built-in microphone. You can also re-record different messages as many times as needed, making it suitable for various applications. ■Day and night detection function It comes with a day and night detection function (three modes: day, night, and day/night). Sound and light can be set separately. ■Versatile use for various outdoor applications It can be used for safety instructions and warnings, as well as detecting and deterring intruders in places where a 12V power supply is available, such as factories, plants, temples, and parks. ●Monitoring illegal dumping, parking lot surveillance, outdoor display monitoring (e.g., car dealerships) ●Safety monitoring of hazardous areas in parks and measures against stalkers ●Gate monitoring and entry guidance in factories ●Monitoring of materials at construction sites, safety work instructions, and guidance for hazardous areas
- Company：セキュリティハウス
- Price：Other
Light-type active sensor Near-infrared reflection method SHA-3200
Sensor for activating the sheet shutter with only necessary functions at a mounting height of 3.2m.
■32 detection spots can be set The sensor has 32 detection spots, and it is possible to erase them by row. ■Stationary object detection time setting Settings for ∞ seconds, 60 seconds, 10 seconds, and 2 seconds are available. The configurable rows are 1 and 2. Rows 3 and 4 are fixed at 2 seconds. ■Area adjustment The depth area can be set to 4 rows, 3 rows, 2 rows, or 1 row using dip switches. The width area can be set for the left and right using area masks. ■Environmental settings It is possible to reduce false triggering caused by snow, rain, insects, and vibrations from the installation area during shutter opening and closing. There are four levels: normal, level 1, level 2, and level 3. ■Interference settings If there is a risk of interference between nearby sensors, it is possible to configure the sensors to have different settings.
- Company：セキュリティハウス
- Price：Other
Light-type active sensor, near-infrared reflection method, DA-6000
High-altitude installation type (recommended height 3m to 6m) capable of covering large doors, achieving a high-density detection pattern (4 rows/24 beams).
■High-altitude installation type capable of long-distance detection With a maximum installation height of 6m, it is ideal as a sensor for large factory doors and sheet shutters, allowing for long-distance detection. (Recommended installation height: 3m to 6m) ■Arrangement of high-density detection patterns An area of four rows in depth, including right in front of the door, has been arranged, with each row having six zones, ensuring that intruders from the side of the door or people standing near the door rail are reliably detected. ■Microcontroller-based control system ●Limited stationary detection Can be set arbitrarily from "2 seconds / 15 seconds / 60 seconds / 180 seconds." ●Interference prevention function Even if multiple sensors are installed in narrow areas such as airlocks, the infrared frequency can be switched, preventing mutual interference. ■Outdoor installation capable Achieves IP55 waterproofing suitable for outdoor use. ■Adjustable to any angle Thanks to the swivel mechanism, angle adjustments can be made freely, allowing for the optimal detection area to be set. Additionally, the optical area can be switched to three patterns based on the installation location using dip switch settings.
- Company：セキュリティハウス
- Price：Other
Direction Detection Microwave Sensor PM-10B
High-performance sensor capable of direction detection with a single unit using microwaves.
■Direction Detection Function ● It is an optimal direction detection sensor using microwaves for activating vehicle exit warning lights. ● It can also detect the direction of pedestrians, allowing for applications such as detecting only entrants to trigger camera recording. ■Convenient One-Sided Wiring ● By installing just one unit on one side, it can effectively determine the direction of vehicles, making installation easy. ■Rainproof Structure ● It has a rainproof design, allowing for outdoor use as is (caulking material is required for the wiring hole). * There may be false triggers during heavy rainfall. * It is recommended for use in environments where vehicles pass through in a straight line. * If there is a tendency for vehicles to approach the sensor from a distance, false detection may occur.
- Company：セキュリティハウス
- Price：Other
Combination Sensor SHA-M32
Combination sensor of microwave and infrared! Also equipped with direction detection function.
■Output Assurance Equipped with both microwave and infrared sensor outputs, it can be used for various applications. "Output 1 is a relay output" and "Output 2 is an open collector output." ■Features of Microwave It is less affected by snow and rain, making it suitable for outdoor locations. ■Mode Switching Function The comprehensive output (Output 1) can switch modes. 1) Microwave or Infrared 2) Microwave only *The output from the infrared sensor section is available independently (Output 2). ■Direction Discrimination Function It can detect movements towards the sensor while ignoring movements away from it. ■Infrared Area There are 32 detection spots: 12 (1st row) + 12 (2nd row) + 8 (3rd row). (Depth 1.25m × Width 3.2m at 3.2m) ■Microwave Area A wide area of 2.5m × 4.0m at a height of 2.2m is secured.
- Company：セキュリティハウス
- Price：Other
Heater-equipped infrared beam switch controller DS-HC
Heater-equipped infrared beam switch controller DS-HC
■Features This device is a controller that can control the movement of a sheet shutter. When combined with the separately sold heater-equipped infrared beam switch sensor unit BS-10NH (up to 2 beams), it enables control of the sheet shutter. By installing the sensor unit near the sheet shutter, it can detect and output when a person stops or passes through the opening and closing area. Additionally, the sensor unit has a built-in heater that reduces malfunctions caused by condensation, freezing, or snow accumulation. When using 2 beams, the adoption of a scanning method prevents mutual interference between the two beams.
- Company：セキュリティハウス
- Price：Other
Heater-equipped infrared beam switch sensor unit BS-10NH
Heater-equipped infrared beam switch sensor unit BS-10NH
■Features This unit is a sensor unit with a heater-equipped infrared beam switch that can control the movement of a sheet shutter (1 beam opposing type, 10m). By combining it with the separately sold heater-equipped infrared beam switch controller DS-HC, control of the sheet shutter becomes possible. By installing the sensor part near the sheet shutter, it can detect and output the stopping or passing of people and vehicles. Additionally, since it has a built-in heater, it can reduce malfunctions caused by condensation, freezing, or snow accumulation.
- Company：セキュリティハウス
- Price：Other
Ultrasonic switch HZ-1U for embedded use
Three-dimensional area stationary detection type safety switch for automatic doors.
■Features ● This safety sensor is ideal for ensuring safety at circular doors due to its three-dimensional area. ● The microcontroller automatically determines the surrounding environment and the sensor installation height through initial settings, establishing a stable area. ● Radio waves, wind, external noise, and temperature changes are all controlled by the microcontroller for optimal operation at all times. * Please note that the monitoring operation starts with an external activation input (non-voltage contact), so it cannot be used as a security sensor or an automatic door activation sensor. * If there are uneven walls or similar features in the installation environment, reflections from the walls may occur, potentially reducing sensitivity.
- Company：セキュリティハウス
- Price：Other
Wireless Touch Switch Receiver DAW-300
Adopting a specific low-power method! (Using the 2.4GHz band) The transmission distance has been further extended, and the reliability of the radio waves has been improved.
■Miniaturization of the receiver By miniaturizing, we can utilize the limited space within the automatic door engine more effectively. ■Interference prevention feature Using the 2.4GHz frequency band, we send signals from 3 channels in sequence to ensure reliability and prevent interference.
- Company：セキュリティハウス
- Price：Other
Wireless Touch Switch Transmitter Main Unit DAW-71S
New touch switch with antibacterial specifications featuring a pairing function!
■ Interference Prevention The registration method for the touch switch (transmitter) has two options to prevent interference. ■ Pairing Mode: Register the transmission ID of the transmitter to the receiver (compatible only between DAW-71 and DAW-31) ■ Select Switch Mode: Same channel code setting as conventional devices ■ Check Reception Status The reception status can be confirmed by the color of the LED on the receiver, whether it is off or on. ■ Improved Environmental Resistance DAW-71 (transmitter): IPX3, DAW-81 (receiver): IPX7. ■ Antibacterial Specification The touch plate section has an antibacterial specification. Additionally, the displayed text will not disappear. ■ Simple Design The touch plate section features a simple design with a luxurious feel and easily readable text. ■ User-Friendly Design ● Maintains compatibility with conventional products (DAW-1, 3, 5, 7, 70 series) ● The operation indicator LED changes from off to blinking to notify when it is time to replace the battery. ● The transmitter uses two readily available AA batteries.
- Company：セキュリティハウス
- Price：Other
Wireless Touch Switch Transmitter Parent Unit DAW-71B
New touch switch with antibacterial specifications featuring a pairing function!
■ Interference Prevention The registration method for the touch switch (transmitter) has two options to prevent interference. ■ Pairing Mode: Register the transmission ID of the transmitter to the receiver (only compatible between DAW-71 and DAW-31). ■ Select Switch Mode: Channel code settings are the same as the conventional model. ■ Check Reception Status You can check the reception status by the color of the LED on the receiver, whether it is off or on. ■ Improved Environmental Resistance DAW-71 (transmitter): IPX3, DAW-81 (receiver): IPX7. ■ Antibacterial Specification The touch plate section has an antibacterial specification. Additionally, the displayed text will not disappear. ■ Simple Design The touch plate section features a simple design with a luxurious feel and easy-to-read text. ■ User-Friendly Design ● Maintains compatibility with conventional products (DAW-1, 3, 5, 7, 70 series). ● The operation indicator LED changes from off to blinking to notify when it's time to replace the battery. ● The transmitter uses two readily available AA batteries.
- Company：セキュリティハウス
- Price：Other
