Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.
181～195 item / All 754 items
Door guide, door thickness 43-58mm, DGU-LN
■Features ●Please use when guide rails cannot be used ●Equipped with high soundproofing rollers ●Includes door thickness adjustment function Sales Units Sold in units of 10 pieces
A remote control equipped with hybrid functions of radio waves, infrared, and radio waves + infrared.
■Features ● This is a hybrid remote control that combines infrared and radio wave technology to enhance security performance. ● Remote control operation can be selected from three patterns: infrared only, radio wave only, and infrared + radio wave. ● The remote control range is approximately 8 meters for infrared and approximately 20 meters for radio waves. ● The remote control is a single-point type, making it ideal for controlling automatic doors, gates, and for operating sheet shutters. ● Up to 200 remote controls can be registered. ● The receiver is available in two types: exposed type (DHV-100R) and embedded type (DHV-24R), allowing for selection based on installation location. ● The exposed type has a rainproof structure, allowing for direct outdoor installation. ● The embedded type fits into a single switch box, enabling discreet indoor installation. ● The exposed type (DHV-100R) supports a power supply voltage of AC 100-200V, while the embedded type (DHV-24R) supports a power supply voltage of DC 12-24V. ● The exposed type (DHV-100R) is equipped with an infrared free mode function. If security is not required, this function allows for immediate operation without the need for remote control registration (infrared mode only).
A remote control equipped with hybrid functions of radio waves, infrared, and radio waves + infrared.
■Features ● This is a hybrid remote control that enhances security performance using both infrared and radio waves. ● Remote control operation can be selected from three patterns: infrared only, radio only, and infrared + radio. ● The remote control range is approximately 8m for infrared and approximately 20m for radio waves. ● The remote control operation is a single-point type, making it ideal for controlling automatic doors, gates, and for opening and closing sheet shutters. ● Up to 200 remote controls can be registered. ● The receiver is available in two types: exposed type (DHV-100R) and embedded type (DHV-24R), allowing selection based on installation location. ● The exposed type has a rainproof structure, allowing it to be installed outdoors as is. ● The embedded type is compatible with a single switch box, allowing for inconspicuous installation indoors. ● The exposed type (DHV-100R) supports a power supply voltage of AC100-200V, while the embedded type (DHV-24R) supports a power supply voltage of DC12-24V. ● The exposed type (DHV-100R) is equipped with an infrared free mode function. If operation does not require security, this function allows for immediate use without remote control registration (infrared mode only).
![Wireless Remote Control Switch [2CH x 3 Point Type] DR-243R](https://image.mono.ipros.com/public/product/image/00b/2000733845/IPROS90458525813683161390.jpeg?w=280&h=280)
Wireless Remote Control Switch [2CH x 3 Point Type] DR-243R
■2CH3 Point System The transmitter is a 2CH 3-point system. The transmitter allows you to select the display of "Open, Stop, Close" and "1, 2, 3" with the included sheet. By using them individually, control of up to 6 locations is possible. ■Reliable Reach Distance Maximum reach distance of approximately 40m with a specific low power. ■Output Switching Function By changing the settings of the receiver, it can be switched between one-shot output and latch output. ■Number of Registrable Units The receiver can register up to 100 IDs. ■Easy Installation The receiver has a compact design and comes with an antenna with a 4m cable, making it suitable for any installation location.
A compact LED signal light of the two-lamp type, excellent in design and visibility.
■Features This compact LED signal light with red and green colors is ideal for alerting during shutter operations and as an in-plant signal light for vehicle control. It lights up with shared voltage input for red and green. ■Excellent Visibility By using four high-power red LEDs and four high-power green LEDs, it offers excellent visibility even under direct sunlight outdoors. Additionally, with a 180° viewing angle, visibility is outstanding. ■Rainproof Structure It has a rainproof structure equivalent to IP54, allowing it to be used outdoors as is. ■Compatible with Single Switch Boxes It is suitable for surface mounting and also compatible with single switch boxes, making it versatile for installation locations. Its compact and smart design allows for a neat installation. ■Examples of Use - As an alert display during shutter operations - As an in-plant signal light for vehicle control - As an indicator light for presence/absence
Signal light with symbol display (○×) using high-brightness LED.
■Features ● The symbol display of ○ and × allows for clear judgment even with a single light type. ● The display section is a compact, slim type with a single light. ● Equipped with high-brightness LEDs, making it clearly visible even in sunlight. ● Due to the LED specification, power consumption can be reduced compared to bulb types. → For confirming vehicle presence in parking lots → For alerting during shutter opening and closing operations ● The initial state of the 【○】【×】 display can be set to always show either (○ or ×) based on settings.
The sensor is ideal for detecting human passage and residual individuals at the CD/ATM corner, without detecting cleaning robots or small animals passing through the area.
■Detection of completely stationary human bodies is possible Since it measures distance, it can detect stationary human bodies and objects within the surveillance area. ■Adopts near-infrared method Because it uses near-infrared technology, it is hardly affected by drafts, noise, or vibrations. ■Automatic measurement of height to the floor Unlike conventional near-infrared reflection methods, it measures distance rather than the amount of infrared reflection. Therefore, it can achieve stable detection regardless of a person's posture or clothing color. Additionally, it has a non-detection zone from the floor to the detection height, preventing false detection from cleaning robots, small animals, trash, or slippers moving within the surveillance area. ■Mutual interference prevention feature Equipped with a mutual interference prevention feature, it allows for adjacent installation in narrow spaces (up to 8 units). ■User-friendly design ● Built-in alarm indicator light (red LED) for convenient operation confirmation. ● Built-in adjustment switch to change detection height according to the installation environment. ● Ceiling installation is possible using the optional embedded attachment (BU-900) (the protrusion from the ceiling when embedded is 8mm). ● Wall-mounted attachments (BL-5000, BCW-401) are also available as optional settings.
Easy operation and a wealth of features for centralized management of diverse sensing systems. Communication capabilities also allow for coordinated operation of up to four devices.
A controller equipped with 3 intrusion alert lines, 1 fire alert line, and 1 emergency input line (for healthcare). It allows connections to various sensors for security and disaster prevention purposes, as well as emergency push buttons for healthcare. It has comprehensive outputs (both voltage-free and voltage) and individual outputs for each input, enabling connections to related devices such as automatic reporting machines, surveillance cameras, and alarm bells. Universal design compliant, it features large buttons that are easy to see and operate. Voice message guidance function: Voice messages play during operation, making it easy to confirm operations. Four alert patterns can be set: - Home alert, visitor notification, home alert + visitor notification, and outing alert can be configured. - The lines (areas) for home and outing alerts can be set individually. Alert and alarm delay function: The delay time from "the moment the outing alert is set until it actually enters alert mode" and "the moment an intrusion signal is received during the outing alert until the alarm operation is executed" can be adjusted in four stages (0 (none), 30 seconds, 60 seconds, 90 seconds).
Easy operation and a wealth of features for centralized management of diverse sensing systems. Communication capabilities allow for coordinated operation of up to four devices.
■Controller equipped with 6 lines for intrusion alert, 1 line for fire alert, and 1 line for emergency input (for healthcare). It can connect various sensors for security and disaster prevention purposes, as well as emergency push buttons for healthcare. It has comprehensive outputs (both voltage-free and voltage) and individual outputs for each input, allowing connection to related devices such as automatic reporting machines, surveillance cameras, and alarm bells. ■Universal design compliant Adopts large buttons that are easy to see and operate, with a light indicator. ■Voice message guidance function Voice messages will play during operation, making it easy to confirm operations. ■Four types of alert patterns can be set ● Four alert patterns can be set: home alert, visitor notification, home alert + visitor notification, and outing alert. ● The lines (areas) for home and outing alerts can be set individually. ■Alert and alarm delay function The delay time from "the moment the outing alert is set until it actually enters alert mode" and "the moment an intrusion signal is received during outing alert until the alarm operation is performed" can be adjusted in four stages (0 (none), 30 seconds, 60 seconds, 90 seconds).
Easy to operate with voice guidance! Controller with event memory that can store both ID codes and operation history.
■ID history management allows for operator verification The ID code for each contactless card is stored along with the operation history, making it possible to confirm when and by whom the operation was performed. ■Up to 99 contactless cards (ISO/IEC15693) can be registered By using contactless cards, unauthorized operations by outsiders can be prevented. ■Management function for up to 999 history records Events such as arming, disarming, and alarms can be recorded with date and time, up to a maximum of 999 entries, and displayed on the LCD screen. ■Two external readers can be connected Up to two dedicated external readers (sold separately) can be connected. The alarm status can also be indicated by LED on the external readers. ■Voice message guidance function Voice messages will play during operation, making it easy to confirm actions. The dedicated external readers will also play voice messages similarly. ■Arming and alarm delay function The delay time can be set up to a maximum of 999 seconds for both "from the point of setting the outdoor arming until actually entering the armed state" and "from the point of receiving an intrusion signal during outdoor arming until the alarm operation is triggered."
Multi-channel controller capable of supporting systems from small to large scale, with primary and secondary linkage.
Communication Function Equipped with communication capabilities, it allows for mutual operation and situation confirmation at multiple locations. Up to three sub-panels can be connected (total wiring distance within 1 km). *It is also possible to connect sensors to the same channel on both the main panel and sub-panels. External outputs are provided from both the main panel and sub-panels. Please use CPEV-S with a diameter of 1.2 mm or more for communication wiring. Diverse Function Expansion By combining various optional units, it can accommodate a wide range of needs. ● Individual Output Unit (CX-3000) It is possible to output various signals such as security/disarm state signals, alarm signals, and loop signals by channel. By incorporating multiple units, it is possible to output up to three types of signals per channel. ● Bus Controller Linked Unit (CX-3000BUS) This unit communicates with the bus controller "BUS-C800" to send and receive various data. It can be connected with reduced wiring, significantly enhancing installation convenience. By using "BUS-K1," security/disarm functions can be performed for each channel using a three-way remote switch.
Multi-channel controller capable of supporting systems from small to large scale, with primary and secondary linkage.
Communication Function Equipped with communication capabilities, it allows for mutual operation and status confirmation at multiple locations. Up to three sub-panels can be connected (total wiring distance within 1 km). *It is also possible to connect sensors to the same channel on both the main panel and sub-panels. External outputs are provided from both the main panel and sub-panels. Please use CPEV-S with a diameter of 1.2 mm or more for communication wiring. Diverse Function Expansion By combining various optional units, it can accommodate a wide range of needs. ● Individual Output Unit (CX-3000) It is possible to output various signals such as alarm/disable state signals, alarm signals, and loop signals for each channel. By incorporating multiple units, it is possible to output up to three types of signals per channel. ● Bus Controller Interlocking Unit (CX-3000BUS) This unit communicates with the bus controller "BUS-C800" to send and receive various data. It can be connected with minimal wiring, significantly enhancing installation convenience. By using "BUS-K1," security/disable operations can be performed for each channel using a three-way remote switch.
Multi-channel controller capable of supporting systems from small to large scale, with primary and secondary linkage.
■Communication Function Equipped with communication capabilities, it allows for mutual operation and situation confirmation at multiple locations. Up to three sub-panels can be connected (total wiring distance within 1 km). *It is also possible to connect sensors to the same channel on both the main panel and sub-panels. External outputs are provided from both the main panel and sub-panels. Please use CPEV-S with a diameter of 1.2 mm or more for communication wiring. ■Diverse Function Expansion By combining various optional units, it can meet a wide range of needs. ●Individual Output Unit (CX-3000) It is possible to output various signals such as security/disarm state signals, alarm signals, and loop signals by channel. By incorporating multiple units, it is possible to output up to three types of signals per channel. ●Bus Controller Interlocking Unit (CX-3000BUS) This unit communicates with the bus controller "BUS-C800" to send and receive various data. It can be connected with minimal wiring, greatly enhancing installation convenience. By using "BUS-K1," security/disarm functions can be performed by channel using a three-way remote switch.
By specializing in security, we achieve compactness, lightweight design, and cost reduction! Ensuring reliable peace of mind with simple operation!
■Easy Operation Designed for commercial use, it can be used and operated from the day of installation with just four simple operations: "Arm, Disarm, Alarm Stop, and Recovery." ■Compact, Lightweight, and Low Cost ● Volume ratio: approximately 1/3 ● Weight ratio: approximately 1/3 By using resin molding, we have achieved a compact and lightweight design, and by mass production through lot production, we have realized a low cost. Although it is compact, lightweight, and low-priced, it has significantly improved specifications compared to the old model. ■Backup We have adopted a small and lightweight nickel-hydrogen battery (DC12V 1000mA) for backup. It can provide approximately 30 minutes of backup when fully charged. ■Reliable Domestic Design and Production Designed for professional use that can withstand security operations, it is suitable for use as a security controller in factories, buildings, and offices. ■User-Friendly Design ● By connecting a two-way external remote switch, remote (wired) collective arming/disarming is possible. (Compatible product: KE-500R) ● Up to four controllers can be connected.
Alert and reporting status is clear at a glance! A multi-channel controller with an integrated graphic panel.
■Main Features ● The warning area is indicated by a green LED and the alarm area is indicated by a red LED flashing on the graphic. ● It can be installed in a space-saving manner due to its integrated design. ● Changes to the map can be easily accommodated by replacing the sheet. ● Signal input can be switched to a contact point, allowing it to be used for equipment monitoring. ● Simultaneous warning/cancellation, individual warning/cancellation, and simultaneous warning/cancellation via remote switch are possible. ● The remote switch is compatible with KE-502R.
