Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
16～30 item / All 30 items
Electromagnetic flow meter that can be used anywhere!
Further evolution of the conventional LP30! - Flow rate range expanded to 4 m/s. - Equipped with a function to register correction coefficients. - Improved grip with changes to the shape of the main body.
Successful miniaturization.
This is a portable electromagnetic induction type flow direction and velocity meter that can be measured not only in oceans but also in rivers, waterways, and lakes.
Not only the flow rate, but also the flow direction and water temperature can be measured.
This is a flow meter that uses a card-type built-in recording method with miniSD card for data recording, controlled by a high-performance 16-bit MCU.
It is accurate because it is an electromagnetic flow velocity sensor.
This is a notice from Rex Co., Ltd. regarding the "Electromagnetic Flow Meter Model 2000."
Equipped with a depth sensor and a water temperature sensor, it can not only confirm the measured water depth but also be used for measuring the vertical profile of water temperature.
The AEM213-D is a portable electromagnetic induction flow direction and velocity meter that can measure not only in oceans but also in rivers, canals, and lakes. It has been fully improved from the compass-equipped model ACM210-D and has successfully been miniaturized. It comes standard with a depth sensor and a water temperature sensor, allowing for confirmation of the measurement depth and also enabling vertical profiling of water temperature. Additionally, the display unit is equipped with a 2MB flash memory calendar function, allowing for automatic recording of measurement data while continuing accurate measurements.
We measure not only the flow rate but also the flow direction and water temperature.
INFINITY is a built-in recording method measuring instrument controlled by a high-performance 16-bit MCU and equipped with a miniSD card as the recording medium. In the COMPACT series, the flash memory was fixed on the electronic circuit board, which required the instrument to be directly connected to a computer for setting observation programs and transferring data. Additionally, since RS-232C was used for data communication, there were numerous requests from users for improvements due to slow transfer times. The new INFINITY has specifications that can resolve all these issues. Users can choose to input observation settings directly from a computer via USB or input settings on a miniSD card removed from the instrument using a computer. Furthermore, by using USB and miniSD cards, the transfer speed has significantly improved. As a result, it enables quick, safe, and easy handling regardless of the field environment.
A direct-reading flow direction and velocity meter composed of a 2-axis electromagnetic flow velocity sensor and a compass.
We offer the direct-reading electromagnetic flow direction and velocity meter 'AEM213-D', which is equipped with depth and water temperature sensors as standard. It allows for reliable flow velocity measurements at desired water depths and can be used for flow velocity observations in various fields such as oceans, lakes, and rivers. 【Measurement Range】 ■ Flow Velocity: 0–250 cm/s ■ Direction: 0–359.9° ■ Depth: 0–50 cm ■ Water Temperature: -3–40℃ *For more details, please download the PDF or feel free to contact us.
Installed in rivers, irrigation channels, and drainage channels, allowing for long-term flow velocity measurements.
A flow meter installed in rivers, irrigation channels, drainage channels, etc., that measures flow velocity over long periods and allows for real-time reading of measurement values. It has no moving or wear parts, enabling precise measurement from very low to high flow velocities. Additionally, it maintains high reliability, and since the detection unit's cap tire code is not exposed to water, there is no concern about disconnection.
The top and bottom surfaces are made of stainless steel in a single structure! Avoid damage to the resin parts.
The "TK-106X model" is a portable, compact electromagnetic flowmeter made of a special resin that is resistant to breaking. It has a built-in electrical circuit that stabilizes the signal and cancels out noise. With its unique structure, it controls the magnetic field and concentrates it in the necessary areas, allowing for efficient measurements. It can also be safely used for measurements near riverbeds or water surfaces. 【Features】 ■ The top and bottom surfaces are made of stainless steel in a single structure to avoid damage to the resin parts. ■ Special resin that is resistant to breaking. ■ Built-in electrical circuit that stabilizes the signal and cancels out noise. *For more details, please refer to the PDF document or feel free to contact us.
Precise measurement from low flow rates to high flow rates! Flow rate value average time can be set to four options: 2, 20, 40, or 60 seconds.
The "TK-115 type" is a stationary electromagnetic flowmeter installed in rivers, irrigation channels, drainage channels, etc., that measures flow velocity over long periods of time. It allows for real-time reading of measurement values. There are no moving or wear parts, enabling precise measurements from low to high flow velocities. Additionally, the detection unit's cap tire cable is not exposed to water, eliminating concerns about disconnection. 【Features】 ■ No moving or wear parts ■ Precise measurement from low to high flow velocities ■ No concerns about disconnection as the detection unit's cap tire cable is not exposed to water *For more details, please refer to the PDF document or feel free to contact us.
![Electromagnetic Flow Meter 'AEM1-D' [Rental]](https://image.mono.ipros.com/public/product/image/f90/2000486004/IPROS42796395885909010392.jpeg?w=280&h=280)
A portable electromagnetic flow meter that allows for easy flow velocity measurement.
■Flow velocity values from microflow to high flow can be obtained through digital output. ■Handling and maintenance are very simple. ■Equipped with a memory function. ■Can be used in the field at a water depth of 3 cm or more. ■Data from up to 255 measurement points can be recorded along with calendar information. ■Data processing is possible using a computer.
![Electromagnetic flow meter 'VE-20' [Rental]](https://image.mono.ipros.com/public/product/image/0d5/2000486015/IPROS63491812180995407302.jpeg?w=280&h=280)
It is a portable electromagnetic flowmeter that can easily measure flow velocity in rivers and various water channels.
■Automatically adjusts optimal sensitivity according to flow rate ■Compact, lightweight, and low power consumption ■Capable of measuring average flow rates at 1 second / 3 seconds / 5 seconds / 10 seconds / 20 seconds / 40 seconds / 60 seconds ■Easy to read with a large LCD display ■Detector compatibility through coefficient settings
Easily accessible WAVE HUNTER for multiple purposes! It can simultaneously observe tsunamis and long-period waves with energy-saving features.
The "HJ-503 (HUNTER JUNIOR 14)" is a compact electromagnetic flow velocity meter equipped with a water pressure and water temperature gauge. It measures water pressure using a pressure sensor and the eastward component flow velocity (E flow velocity) and northward component flow velocity (N flow velocity) using an electromagnetic flow velocity sensor, with a sampling interval of 0.5 seconds (standard). The data for the measurement duration is recorded on an SD card. Stable wave observation is achieved with water pressure wave height, and water temperature and direction are also measured and recorded as sub-data. 【Features】 - Equipped with a water pressure sensor - Capable of observing wave height, wave direction, and flow velocity for 40 days with a measurement time of 20 minutes and a measurement interval of 60 minutes - Continuous measurement function for over 14 days - Supports flow velocity measurement in intermediate layers with a hanging frame - Transforms into a worldwide device with satellite communication - Can be monitored from anywhere on Earth with KOBAZAME-S (sold separately) *For more details, please refer to the PDF document or feel free to contact us.
The electronic circuit is protected by a waterproof case, so you can use it safely on the water surface.
The electromagnetic flow velocity meter Model 2000 is ideal not only for measuring flow velocity in rivers, rainwater, sewage, industrial wastewater, and agricultural water, but also for calibrating weirs, flumes, and existing flow meters. Additionally, it can be used when you want to know the flow velocity in other open channels. 【Features】 ○ The electronic circuit is protected by a waterproof case, allowing for safe use above water surfaces. ○ The case is made of highly impact-resistant material. ○ Curved design prioritizing ease of use in the field. For more details, please contact us.
The PVM-3 is a portable electromagnetic flow meter designed for measuring flow velocity in various applications such as sewage, wastewater, rainwater, and rivers.
***Features*** - Automatic sensitivity adjustment according to flow rate. - Measurement data stored in internal memory. - Saved data can be transferred to a computer. - Automatic power-saving mode function. - 20 characters x 4 digits LCD display. - Built-in calendar.
