Epoxy adhesive Product List and Ranking from 26 Manufacturers, Suppliers and Companies

Epoxy, Etc. Company's 5-minute curing epoxy adhesive 10-3005

A fast-curing adhesive with high bonding strength that cures in 5 minutes at room temperature. Used for electronic devices and jewelry.

Epoxy, Etc.'s fast-curing epoxy adhesive boasts high bonding strength and excellent applicability to a wide range of materials and uses. The curing time at room temperature is quick, ranging from 5 to 46 minutes, making it ideal for situations where workability is required. The features are as follows: - High bonding strength. - Rapid curing at room temperature (three stages of speed) - Resistance to water and chemicals - Excellent thermal shock resistance - 1:1 mixing ratio - Impact resistant This adhesive is not only effective for bonding various materials but also meets the UL94HB flammability requirements, making it suitable for use in applications with thermal loads.

Company：理経
Price：Other

glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Specification Sheet Available] TERADITE Adhesive Series

We offer one-component heat-curing types, two-component room temperature curing types, and anaerobic curing types. Samples are also available.

The TERADITE adhesive series from Terada Corporation is an adhesive primarily designed for bonding various metals and plastics. It is made to order, but you can purchase it in small quantities (around a few hundred grams). Samples are also available, so if you are interested, please feel free to contact us. Additionally, customization according to customer requirements is possible. If you wish to customize, please do not hesitate to inquire. ■ Single-component heat-curing epoxy adhesive ■ Two-component room temperature-curing epoxy adhesive (Note: TE-6010 is a potting resin, but it has high suitability for bonding bake boards.) ■ Anaerobic curing (polyepoxy methacrylate) adhesive *For more details, please download the PDF document from the bottom or contact us.

Company：寺田
Price：Other

glue
Other polymer materials
Other electronic parts
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Epoxy adhesive Araldite 2013-1 (TDS and SDS available)

Huntsman’s general-purpose two-component epoxy adhesive. It is in paste form, making it less likely to drip, and has weather resistance and chemical resistance.

This is a two-component epoxy adhesive from the global chemical manufacturer Huntsman. It has good weather resistance and chemical resistance, and it comes in a paste form with a metallic color that can be applied to vertical surfaces. This is a general-purpose grade paste adhesive. If you prefer a low-viscosity product, please consider 2011 or 2012 (RAPID). For more details, please check the documentation or contact us. *Please note that 2013-1 has a hardener that is classified as a toxic substance.

Company：寺田
Price：Other

Other polymer materials
glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Epoxy adhesive Araldite 2014-2 (TDS and SDS available)

Two-component epoxy adhesive from Huntsman. In addition to heat resistance up to 140°C, it also has high chemical resistance, water resistance, and thixotropic properties that prevent dripping even at a thickness of 5mm.

This is a two-component epoxy adhesive from the global chemical manufacturer Huntsman. It has a heat resistance of up to 140°C and particularly high chemical and water resistance, making it suitable for bonding various materials such as metals, electronic components, and glass. Due to its high heat resistance, it can also be used in relatively high-temperature environments. For more details, please check the documentation or contact us. *Please note that the 2014-2 hardener is classified as a hazardous substance.

Company：寺田
Price：Other

Other polymer materials
glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Epoxy-based adhesive Araldite 2015-1 (TDS and SDS available)

It is a two-component epoxy adhesive from Huntsman. It has excellent toughness and weather resistance. It can fill gaps and has high thixotropy, allowing it to remain non-sagging even at a thickness of 10mm.

This is a general-purpose two-component epoxy adhesive from the global chemical manufacturer Huntsman. It is a tough paste that can bond GRP, SMC, and dissimilar materials, and can fill gaps. It does not sag even when applied thickly. For details, please check the properties table below or contact us. It is a non-hazardous substance, making it easy to manage and handle.

Company：寺田
Price：Other

Other polymer materials
glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Epoxy adhesive Araldite AV138M-1/HV998-1

This is a two-component epoxy adhesive from Huntsman. It has excellent heat resistance and chemical resistance, withstanding temperatures up to 140°C. Thixotropic. TDS and SDS are available for distribution.

This is a two-component epoxy adhesive from the global chemical manufacturer Huntsman. It has excellent chemical resistance and can withstand temperatures up to 140°C. Additionally, it is thixotropic and suitable for gap filling. For more details, please check the properties table below or contact us. *Please note that the hardener HV998-1 is classified as a hazardous substance.

Company：寺田
Price：Other

Other polymer materials
glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Epoxy-based adhesive Araldite 2020 (TDS and SDS available)

Huntsman’s two-component epoxy adhesive. A low-viscosity, transparent adhesive with a low refractive index. Recommended for bonding glass and ceramics, transparent casting, and laminating.

This is a two-component epoxy adhesive from the global chemical manufacturer Huntsman. It is a low-viscosity transparent adhesive suitable for bonding glass and ceramics, as well as for transparent casting and laminating. It has a refractive index equivalent to that of glass. *Please note that the 2020 Hardener is classified as a hazardous substance. *For details, please check the properties table below or contact us.

Company：寺田
Price：Other

Other polymer materials
glue
Coating Agent
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Araldite AW2101/HW2951 (TDS/SDS available)

This is a two-component epoxy quick-setting adhesive from Huntsman Corporation. It cures rapidly at room temperature and can fill gaps.

This is a two-component epoxy-based fast-curing adhesive from the global chemical manufacturer Huntsman. It features a usable time of 4 to 8 minutes and rapid curing at room temperature. Although it is in paste form, it has thixotropic properties, allowing for gap filling. While it is not as fast-curing as RAPID (2012), it has high heat resistance. It exhibits adhesion to various substrates such as metals, ceramics, and rubber. *For more details, please check the property table below or contact us.*

Company：寺田
Price：Other

Other polymer materials
glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Epoxy-based adhesive Araldite 420AB (TDS and SDS available)

Two-component epoxy adhesive made by Huntsman. It has high strength and elasticity, allowing it to bond various materials, but it is particularly recommended for bonding CFRP and GFRP.

Araldite is an epoxy-based adhesive manufactured by Huntsman, used in advanced technology fields such as electronics, automotive, and aerospace around the world, earning high reliability. Araldite 420AB excels in shear and peel strength and can bond to a variety of materials. In addition to metals, it demonstrates high adhesion to CFRP and GFRP. *This is a stock item. *For details, please check the documentation or contact us. *The TDS is available in English.

Company：寺田
Price：Other

Composite Materials
Other polymer materials
glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Epoxy-based adhesive TE-1002FR (high adhesion strength, flame retardant)

【New development product number!】This is an epoxy-based adhesive with a shear adhesive strength of 32 MPa between SUS materials and equivalent to UL94 5mm V-0!

TE-1002FR is an epoxy-based adhesive with flame retardancy equivalent to UL94 V-0 (5mm thick). It can be used for bonding, fixing, and sealing in areas where flame retardancy is required. Two-component room temperature curing epoxy resin Features: Room temperature curing, high adhesion strength, flame retardancy *Samples are available upon request. Please contact us for more details. *For more information about this product, please download the specification sheet from below. *For other products, please download the catalog and epoxy & acrylic resin "TERADITE" from below.

Company：寺田
Price：Other

Other polymer materials
glue
Other consumables
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

One-component LCP-compatible epoxy adhesive

Compatible with low halogenation! An adhesive with good adhesion to liquid crystal polymer (LCP).

We would like to introduce our LCP-compatible epoxy adhesive, 'A-7373BKLC.' It can be used for adhesion to liquid crystal polymers (LCP) and has excellent adhesive properties. It is also compliant with low halogen requirements, with a viscosity of 62,000 mPa.s and a gel time of 80 seconds. 【Features】 ■ Excellent adhesion to liquid crystal polymers (LCP) ■ Compliant with low halogen requirements *For more details, please refer to the PDF document or feel free to contact us.

Company：レジナス化成
Price：Other

glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Epoxy adhesive series for difficult-to-bond materials

This is a grade that is compatible with materials such as liquid crystal polymer (LCP) and PA9T, which are difficult to bond with conventional adhesives.

The epoxy adhesive series for difficult-to-bond materials includes the following grades: 【Product Group】 ■ Liquid Crystal Polymer (LCP) Grade 【A-7373BKLC】 ■ PA9T Grade 【A-2230BK】 Both are one-component thermosetting adhesives with good workability, suitable for bonding various shapes of components.

Company：レジナス化成
Price：Other

glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Two-component ultra-high heat-resistant epoxy adhesive

It is a product with a glass transition temperature of 269°C, exhibiting particularly excellent heat resistance.

"A-5410-11, H-2410-11" is an adhesive characterized by a high glass transition temperature (Tg) of 269°C, excellent heat resistance, and low linear expansion. Due to its minimal expansion and contraction, it has good heat cycle resistance, making it suitable for use in harsh temperature environments. 【Features】 ■ High Tg and low linear expansion coefficient ■ Good workability for casting applications due to low viscosity ■ Excellent moisture resistance *For more details, please refer to the PDF document or feel free to contact us.

Company：レジナス化成
Price：Other

glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

One-Hand Mixing for Conductive Repair of Flexible PCBs

For repairing conductivity in thin substrates and narrow areas. No measuring or hand mixing required. Just press to automatically mix the two components, allowing for easy conductivity connections at room temperature without the use of solder.

For the repair of conductive connections in components that are difficult to apply heat or mechanical stress, such as FPCs and thin film substrates. ONE-HAND MIXING is easy to apply to targeted areas and is suitable for repair applications around flexible printed circuit boards where soldering is challenging. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wire and lead wire continuity fixation ONE-HAND MIXING

Fix thin wires with conductive adhesive. No weighing or hand mixing required. Just press to automatically mix the two components, making it easy to create conductive connections at room temperature without solder.

For applications where you want to secure the continuity of fine wires and lead wires without using solder or crimp terminals. ONE-HAND MIXING can be applied to the necessary areas to achieve both adhesion and conductivity, making it effective for connections around sensor electrodes and small components. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPC, LEDs, and sensors. - It enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility even after curing, allowing for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ground connection to metal housing ONE-HAND MIXING

For ground connections without screws or bolts. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

When you want to connect GND or earth to metal enclosures or plated parts. Even in structures where screw fastening or riveting is difficult, conductive adhesive connections enhance the design flexibility for enclosure grounding and shield connections. ONE-HAND MIXING is a product that allows for automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No need for weighing or mixing operations, which suppresses variations in the mixing ratio by the operator. - Cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - Maintains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. * For detailed data, please check the TDS and the special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aluminum casing conductive connection ONE-HAND MIXING

For grounding/GND connection to aluminum bodies. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the need for solder.

For those considering conductive connections to aluminum enclosures, aluminum bodies, and metal components: ONE-HAND MIXING offers an option for grounding and GND connections through application, even in areas where screwing or welding is difficult. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, allowing for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

No-screw ground connection ONE-HAND MIXING

When you want to establish a connection without using screws or terminals. Just press to automatically mix the two liquids, allowing for easy room temperature connections without solder.

For grounding connections where there is no space for screws, nuts, or crimp terminals, or where you want to reduce processes, ONE-HAND MIXING utilizes conductivity and adhesion to achieve easy electrical bonding to housings and components. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver fillers using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which suppresses variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Field repair of poor connectivity ONE-HAND MIXING

For repair work on connections, wiring, and patterns. Just press to automatically mix the two components, allowing for easy cold connections without the use of solder.

For continuity repairs on-site, such as poor contact, broken wiring, or missing circuit board patterns. ONE-HAND MIXING is suitable for small area repairs in prototyping, evaluation, and maintenance because it allows for quick use of the necessary amount. ONE-HAND MIXING is a product that automatically mixes and dispenses a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, which reduces variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, allowing it to be used for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Alternative connection to spot welding ONE-HAND MIXING

For conductive connections that cannot be welded. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

For the conductive connection of components where spot welding and soldering are to be avoided. This method can be considered for structures where heat impact needs to be minimized, and during the prototype stage where equipment installation is difficult, using conductive adhesives. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No measuring or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections of heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It maintains flexibility after curing, allowing it to be used for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

One-hand mixing for alternative conductive connection to rivets.

For connections with a structure that is difficult to rivet or crimp. Automatically mixes two liquids just by pressing, allowing for easy room-temperature conductive connections without the use of solder.

For conductive connections in structures where rivets, crimp terminals, and screws are difficult to use, ONE-HAND MIXING supports component design that requires miniaturization and space-saving by combining adhesive fixation through application and conductivity. ONE-HAND MIXING is a product that can automatically mix and dispense a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No need for measuring and mixing, which reduces variability in the mixing ratio by the operator. - Cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - Retains flexibility after curing, allowing it to be used for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

EMI shielded conductive connection ONE-HAND MIXING

For connecting the shield material and the chassis ground. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

For conductive connections between EMI shielding materials, metal enclosures, and grounds. Even in areas where screw fastening or soldering is difficult, using conductive adhesive allows for space-saving shield and ground connections. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No need for measuring or mixing, reducing variability in the mixing ratio by the operator. - Cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. - Maintains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Large Area Electrode Contact Stabilization ONE-HAND MIXING

For the adhesion and fixation of large electrodes for measurement. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

This is for applications where large electrodes in the 200-300mm range are closely adhered to materials, such as in dielectric property measurements. It helps suppress the micro-gaps that can easily occur with simple physical contact, thereby reducing measurement variability. The workability, which allows for easy position adjustment after application, is also appreciated. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which helps suppress variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. - It retains flexibility even after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Defroster tab adhesive repair ONE-HAND MIXING

Restores terminal and tab disconnections with continuity. Automatically mixes two liquids with just a push, allowing for easy cold connections where solder cannot be used.

For repairs around terminals that cannot withstand heat or mechanical stress, such as the defroster tab of the rear window, we support urgent repairs and short delivery times with high adhesive strength and conductivity, made in Japan and available for immediate delivery. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and the special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Outdoor equipment continuity connection ONE-HAND MIXING

Conductive adhesive with weather resistance test data. Automatically mixes the two components just by pressing, allowing for easy electrical connections at room temperature without the use of solder.

For grounding connections and continuity repairs of equipment and facilities used outdoors. We publish data on weather resistance test results and changes in conductivity and adhesion during environmental testing as technical documentation to support considerations for outdoor applications. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No measuring or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please refer to the TDS and special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Research Material] Global Market for Epoxy Adhesives

Global Market for Epoxy Adhesives: Single-component, Two-component, Aerospace & Defense, Automotive, Marine, Electrical & Electronics, Construction, Energy & Power

This research report (Global Epoxy Adhesive Market) investigates and analyzes the current state of the global epoxy adhesive market and its outlook for the next five years. It includes information on the overview of the global epoxy adhesive market, trends of major companies (sales, selling prices, market share), market size by segment, market size by major regions, and distribution channel analysis. The market segments by type focus on single-component and two-component adhesives, while the segments by application target aerospace & defense, automotive, marine, electrical & electronics, construction, and energy & power. The regional segments calculate the market size of epoxy adhesives by dividing them into North America, the United States, Europe, Asia-Pacific, Japan, China, India, South Korea, Southeast Asia, South America, the Middle East, and Africa. It also includes the market share of major companies in the epoxy adhesive sector, product and business overviews, and sales performance.

Company：マーケットリサーチセンター
Price：Other

Other services
Epoxy adhesive

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Epoxy adhesive Product List and Ranking from 26 Manufacturers, Suppliers and Companies | IPROS GMS

Epoxy adhesive Manufacturer, Suppliers and Company Rankings

Epoxy adhesive Product ranking