Fluorine Coating Product List and Ranking from 11 Manufacturers, Suppliers and Companies

Insulating coating agent with over 4 times high performance, non-flammable and safe.

More than four times the moisture resistance and high insulation compared to urethane and acrylic. Non-hazardous and non-organic solvents, no need for explosion-proof equipment or management. Just room temperature drying is sufficient!

The insulation coating agent, FluoroSurf FG-3650 series, is ideal for insulating protection of electronic components, as well as waterproof and moisture-proof coatings. Compared to urethane-based, acrylic-based, and silicone-based coatings, its moisture resistance is more than 3 to 10 times greater (at the same film thickness)! It demonstrates insulation protection functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in the manufacturing environment】 ■ Non-flammable and free from fire safety regulations → No need for explosion-proof equipment, hazardous material storage, or quantity management. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → No need for workplace environmental measurements or organic solvent health checks for workers. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment like heating furnaces is necessary. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coating for preventing adhesion of resin parts

Low-temperature processing technology capable of handling everything from general-purpose resins to super engineering plastics.

Resin parts are lightweight and have excellent processability, but they are prone to accumulating dirt and adhesive substances on their surfaces, which can lead to process troubles. However, high-temperature sintering coatings carry risks of thermal deformation and reduced material properties, and there are often cases where their application is limited. FU-1240 is a coating that minimizes thermal impact on the resin through low-temperature sintering while providing non-stick and release properties. It suppresses the adhesion of adhesives and resins, improving cleanability and maintainability, thereby contributing to production stability. It can accommodate a wide range of materials from general-purpose resins to engineering plastics and super engineering plastics, allowing for specification design tailored to specific applications. We also support application considerations and evaluation tests, so please contact us for technical consultations and prototype verifications.

Company：日建塗装工業
Price：Other

Surface treatment contract service
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Low-temperature sintering fluorine-based coating suitable for precision parts.

Surface treatment that can impart surface functions while suppressing dimensional changes.

In precision parts and small mechanical components, even slight thermal deformation or dimensional discrepancies can significantly impact product performance. Therefore, surface treatments that involve high-temperature firing may be difficult to apply. Our FU-1240 can form a film at low temperatures, allowing us to impart non-stick and slip properties while minimizing deformation and warping due to heat. It is also easy to apply to thin metal sheets and finely processed parts, which helps reduce constraints during the design phase. By providing functions such as reduced contact resistance and adhesion prevention, it contributes to the stabilization of component performance. It is an effective option for surface treatment in applications with high precision requirements. We are also able to support the examination of application conditions and prototype evaluations, so please feel free to contact us for technical consultations and prototype verifications.

Company：日建塗装工業
Price：Other

Surface treatment contract service
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Nozzle surface treatment to prevent poor ejection.

Suppressing liquid dripping and positional displacement to achieve stabilization of precise coating.

In the liquid dispensing process, dispensing failures are often caused by liquid adhesion to the nozzle's outer surface, leading to issues such as misalignment, liquid dripping, and stringing. This can result in variations in product quality and an increase in defect rates. NonStick STC suppresses liquid adhesion by forming a low surface energy layer on the nozzle surface, improving the break-off of droplets after dispensing. This is expected to stabilize the dispensing volume and position, contributing to quality improvement in precision coating processes. Additionally, due to its ultra-thin film, the impact on nozzle shape and dispensing diameter is minimized. It can be considered an effective countermeasure when improvements are difficult to achieve through a review of process conditions alone. For technical inquiries or prototype verification, please feel free to contact us.

Company：日建塗装工業
Price：Other

Surface treatment contract service
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thin film fluoropolymer coating "NCFPC Series" with excellent lubricity.

Super-thin film fluorine coating with excellent water and oil repellency!

The "Nano Process NCFPC Series" features an ultra-thin fluorine coating that excels in liquid repellency, such as water and oil, compared to fluoropolymer coatings, improving liquid drainage and flow. It causes almost no dimensional changes and maintains optical properties, making it possible to process "precision parts" and in fields that require high dimensional and surface accuracy, where fluoropolymer coatings have previously been difficult. <Examples of Applications> - Improvement of liquid drainage for water and oil - Improvement of liquid flow for water and oil - Prevention of oil diffusion in bearing components, etc. Additionally, Nano Process has been renewed with three other new functions, each with different features and applications. [Features of Each Series] ■ TC-10S Excellent precision, visible light transmittance, water repellency, and oil repellency ■ TLS Series Superior non-stick properties against adhesive materials like tape ■ HP Series Excellent hydrophilicity Currently, we are offering technical materials summarizing the details of each series. If you are interested in more details or are facing challenges with surface treatment in the precision field, please download the materials or contact us directly.

Company：吉田ＳＫＴ
Price：Other

Other semiconductors
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water and oil repellent fluorosurf FG-5040 for dirt prevention.

High safety, low toxicity non-flammable solvent type *Sample available.

A fluorosurfactant that forms a water-repellent and oil-repellent film with a pencil hardness of 3H, capable of reducing dirt adhesion. 【Features】 ■ Forms a water-repellent and oil-repellent film with a pencil hardness of 3H, capable of reducing dirt adhesion. ■ Also functions as a moisture-proof and rust-proof coating. ■ The film has a low refractive index (1.41). By controlling the film thickness to about 0.1μ, it can also be used as a low-reflective surface coat. ■ When applied to transparent plates or lenses, light transmittance increases by 3-4%. ■ The effect is particularly enhanced when stacking multiple lenses. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Example] Providing anti-fouling properties (fingerprint reduction) to optical films.

By adding a small amount to UV-curable acrylic hard coat agents, you can impart functionalities such as anti-fouling (fingerprint reduction), low refractive index, and slip properties.

FluoroSurf FS-702X series is a fluorine-based additive for UV-curable hard coatings. When processing UV-curable hard coatings on optical films, simply adding a small amount of FluoroSurf FS-702X to the hard coating can impart functionalities such as anti-soiling (fingerprint reduction), low refractive index, and slip properties. After addition, the fluorine component rises to the surface of the hard coating and exhibits its functions, and during UV irradiation, it co-polymerizes with the components of the hard coating to become integrated. By integrating, this product's functionality possesses abrasion resistance. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

others
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Low reflection and anti-reflective coating example: FluoroSurf FS-702X

Introducing examples of how we have met the needs of customers from various industries with the UV-curable hard coat agent additive "FS-702X series."

The "FloroSurf FS-702X Series" is a product that can impart functionalities such as anti-fouling, low refractive index, slip resistance, and water and oil repellency by adding just a small amount to UV-curable acrylic hard coat agents. During drying, the fluorine component rises to the surface of the hard coat agent to exhibit its functions, and an addition amount of about 1-3% is sufficient. It offers good cost performance. When exposed to UV light, it co-polymerizes with the components of the hard coat agent, enhancing wear resistance as well. [Introduction to Background] ■ We want to impart anti-fouling and anti-reflective functions to optical films. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

others
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Anti-Soiling Example] Fluorine-based Anti-Soiling Coating Agent FluoroSurf

Strongly suppresses the adhesion of fingerprints and water stains on various materials! Wiping off becomes easy too.

Anti-fouling coating refers to a treatment that protects products from dirt. Cooking utensils and machinery accumulate various types of dirt over prolonged use. If this dirt is left unattended, it can hinder the product's original performance, and in the worst case, it may lead to product failure. However, by applying an anti-fouling coating, the removal of dirt becomes easier, thus reducing the hassle of daily maintenance. [Introduction to Background] ■ A durable anti-fouling coating agent is needed without changing the appearance. ■ Scale (white stains) adheres to metal surfaces and becomes difficult to remove. ■ Fingerprints are prominent on stainless steel control panels and inner doors. ■ Improvement of light transmittance and fingerprint prevention for films used on displays. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Example] Providing anti-soiling and anti-reflective functions to optical films.

By adding a small amount to the film hard coating agent, it can impart anti-fouling properties, low friction, and low refractive index.

The "FloroSurf FS-702X Series" is a product that can impart functionalities such as anti-fouling, low refractive index, slip resistance, and water and oil repellency by adding just a small amount to UV-curable acrylic hard coat agents. During drying, the fluorine component rises to the surface of the hard coat agent, exhibiting its functions, and the required addition amount is only about 1-3%, making it very economical. It also demonstrates effectiveness in enhancing abrasion resistance as it co-polymerizes and integrates with the components of the hard coat agent during UV irradiation. [Challenges] - To add to the hard coat agent to impart anti-fouling, slip resistance, and reduced refractive index functions. - To ensure that abrasion resistance is not compromised. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

others
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Anti-Contamination Example] Fingerprint Prevention Coating Agent FluoroSurf

Easily applicable, it strongly suppresses the adhesion of fingerprints and water stains on various materials! Wiping off is also easy. Can be applied at room temperature.

Anti-fouling coating refers to a treatment that protects products from dirt. It allows for easy removal of fingerprints, grease stains, and water spots. It helps reduce the hassle of daily maintenance. 【It is effective in the following cases】 ■ Want to easily remove fingerprints from surfaces ■ Aim to reduce cleaning time ■ Need a durable anti-fouling coating that does not change the appearance ■ Scale (white stains) adheres to metal surfaces and becomes difficult to remove. ■ Fingerprints are noticeable on stainless steel control panels and inner doors. ■ Improve the transmittance of films used on displays, prevent fingerprints, and enhance slip resistance. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【事例】フッ素系添加剤でUVハードコート剤に防汚性、滑り性を付与

プラスティックフィルムの指紋対策と滑り性向上 UV硬化型ハードコート剤に少量添加で指紋低減・滑り性、低屈折率を付与。

『フロロサーフ　FS-702Xシリーズ』は、UV硬化型のアクリル系ハードコート剤に少量添加するだけで、防汚性・指紋低減・低屈折率・すべり性・撥水撥油性などの機能性を付与できる添加剤です。乾燥時にフッ素成分がハードコート剤の表面に浮上して機能を発現し、添加量は1～3％程度と極少量でOK。コストパフォーマンス良好です。 UV照射時にハードコート剤の成分と共重合して一体化するため、耐摩耗性付与の面でも効果を発揮します。【特長】 ■1～3％の添加量でハードコート表面に防汚性や滑り性などの特性を付与 ■油脂滑落角が低く、指紋の除去性にも優れた効果を発揮 ■ハードコート剤との相溶性から選べる3タイプ ※無料サンプルご希望の方は、お問い合わせ内容に「サンプル希望」とご記載下さい。

Company：フロロテクノロジー
Price：Other

others
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【防汚事例】タッチパネルや操作盤の指紋付着低減コーティング

簡単に塗布出来て、各種素材の指紋の付着を強力に抑制！　ふき取りが簡単になります。常温で施工可能。使用現場での再塗布も容易です。

防汚コーティングとは、製品を汚れから守る加工のことです。指紋の付着や油脂の汚れ、水垢などが簡単に除去できるようになります。日々のメンテナンスの手間を省くことができます。【こんなケースに威力を発揮します】 ■タッチパネル表面の指紋を簡単に除去できるようにしたい ■タッチパネルの滑り性をアップし、操作感を向上させたい ■指紋や汚れの清掃時間の短縮化を図りたい ■外観を変えずに、耐久性のある防汚コーティング剤が必要 ■金属表面にスケール（白シミ）が付着して取れなくなる。 ■ステンレス製の操作盤や内扉において指紋が目立つ。 ■ディスプレイに使用されるフィルムの透過率向上と指紋防止。 ■操作時の滑り性アップ。 ※無料サンプルご希望の方は、お問い合わせ内容に「サンプル希望」とご記載下さい。

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-stick coating agent FluoroSurf FG-5000 series

Forms a non-stick surface by applying. Adhesives and tapes will not adhere. It is a transparent thin film, so it does not affect the appearance of the material.

The "Anti-Contamination and Fingerprint Prevention Coating Agent FluoroSurf FG-5000 Series" is a coating agent that forms a non-stick surface with anti-contamination properties. It can be easily applied, dries at room temperature, and makes it difficult for not only tape and adhesives but also fingerprints and grease stains to adhere, while also allowing for easy removal. 【Features】 ■ Tape, adhesives, fingerprints, and dirt are less likely to adhere. ■ It is a high-adhesion coating film that chemically bonds to various materials such as glass and metal at room temperature, ensuring long-lasting functionality. ■ The coefficient of dynamic friction on the surface is low, providing a dry lubricated surface. ■ It is a transparent thin film, so it does not compromise the appearance of the material. ■ Application is easy, and a film is formed simply by drying at room temperature. ◎ Samples are available upon request. Please note that our products are industrial chemical products, and we cannot provide samples for personal use (in cases without corporate status), medical use, or applications involving contact with food.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Environmentally friendly room temperature quick-drying moisture-proof coating agent FluoroSurf

Four times the moisture and water resistance of urethane and acrylic coatings at room temperature drying. Non-flammable and not subject to fire safety laws. Not subject to organic solvent regulations under the Industrial Safety and Health Act.

The protective coating agent for electronic substrates, "Fluorosurf FG-3650 Series," is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Features】 ■ Non-flammable and low-odor liquid, making it safe to use! Not classified as an organic solvent. → Fluorosurf FG-3650 is non-flammable and low in toxicity, ensuring safety. It is not subject to PRTR law or fire service law regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → This reduces the management items for environmental measurement and organic solvent health checks for workers. ■ Higher moisture and waterproofing performance compared to other resins! → Four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings. ■ Resistant to acidic substances such as lithium battery electrolytes! → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment such as heating furnaces is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Fluorine Coating Example] Easily removes fingerprints and dirt from metal surfaces!

Imparts durable fluorine anti-fouling properties (water and oil repellency) to metal surfaces. Effective in preventing fingerprints and dirt adhesion, as well as preventing tape and adhesive sticking.

The high hardness and high adhesion fluorine coating agent for metals, "FluoroSurf FG-5093 Series," forms a transparent fluororesin film with high adhesion and high hardness on metal surfaces at room temperature, effectively repelling water and oil, and demonstrating excellent dirt resistance. The film is transparent and thin, so it does not alter the texture of the material. Additionally, it has high adhesion and wear resistance, ensuring long-lasting effectiveness. Application is simple; just wipe with a cloth or sponge soaked in the coating liquid. There are no uneven coatings, and it finishes easily, with a dirt-repellent film forming within a few minutes of drying at room temperature. It is non-flammable, low toxicity, and low odor, making it safe for use at the application site. We are currently offering product samples for free! 【Features】 ■ Reduced dirt adhesion ■ Reduced fingerprint adhesion ■ Release treatment ■ Low friction ■ Non-flammable liquid *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Fluorine Coating Agent Example] Protects printed circuit boards from battery electrolyte.

A fluororesin coating with acid resistance prevents ignition of the substrate in the event of electrolyte leakage. It is a room-temperature drying fluorine coating agent that also prevents corrosion of metal parts.

Fluorine coating agents exhibit outstanding resistance to lithium battery electrolyte compared to other resin coating agents. They can prevent fires caused by circuit short-circuits when the electrolyte leaks, as well as corrosion of metal parts. They provide protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency in a thin film. They have a proven track record of being adopted as safety measures in various fields, including aircraft, automotive circuit boards, and mobile devices. **Challenges Addressed by Fluorine Coating** - No short-circuit occurs even if lithium battery electrolyte leaks and adheres to the pattern part of the circuit board. - Can be easily applied with dispensers and dries within a few minutes at room temperature. No drying process is required. - Non-hazardous materials with no fire safety regulations. No quantity management or explosion-proof measures are necessary. - Not classified as organic solvents under the Industrial Safety and Health Act. Regular organic health checks are not required. *We offer free samples to those who request them (limited to corporate clients). Please indicate "Sample Request" in your inquiry. *We sincerely apologize, but as our products are industrial chemical products, we cannot provide samples for medical or food-related applications.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Anti-Contamination Example] Prevention of Fingerprint Adhesion on Glass Showcases

By applying FluoroSurf FG-5084 to the surface of glass cases in jewelry stores and various shops, it becomes easy to wipe off fingerprints. The performance lasts for a long time.

It can be easily applied with a transparent coating, providing long-lasting (over 1 year) dirt-repellent properties to glass surfaces. ■ A durable dirt-repellent coating is needed without changing the appearance. ■ It is non-flammable and low-odor, making it safe to apply in stores. Fluorosurf FG-5084 is also used for dirt prevention on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Fluorine Coating Example】Easily removes fingerprints and dirt from metal surfaces!

Imparts durable fluorine anti-fouling properties (water and oil repellency) to metal surfaces. Effective in preventing fingerprints and dirt adhesion, as well as preventing tape and glue from sticking.

The high hardness + high adhesion fluorine coating agent for metals, 'FloroSurf FG-5093 Series', forms a transparent fluororesin film with high adhesion and high hardness on metal surfaces at room temperature, effectively repelling water and oil and demonstrating excellent dirt resistance. The film is transparent and thin, so it does not alter the texture of the material. Additionally, it has high adhesion and wear resistance, ensuring long-lasting effectiveness. Application is simple; just wipe with a cloth or sponge soaked in the coating liquid. There are no uneven coatings, and it finishes easily, with a dirt-repellent film forming within a few minutes of room temperature drying. It is non-flammable, low toxicity, and low odor, making it safe to use on-site. We are currently offering product samples for free! 【Features】 ■ Reduced dirt adhesion ■ Reduced fingerprint adhesion ■ Release treatment ■ Low friction ■ Non-flammable liquid *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case of Solvent-Free] Insulating paint (coating agent) not classified as organic solvent.

Environmentally friendly (non-organic solvent + non-hazardous + low odor) room temperature drying type insulation moisture-proof coating agent (conformal coating agent)

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 series" is suitable for insulating protection and waterproofing of electronic components and mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety and health law restrictions. Compared to urethane, acrylic, and silicone-based insulating coatings, its moisture resistance is over 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in Manufacturing Environments】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under occupational safety and health law. → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment like heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent, resulting in zero waste. ■ Repairs are possible after coating. *If you would like a free sample, please contact us.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-stick anti-fouling coating agent, fluorine surface treatment of blades at our own site.

A non-stick coating agent in the form of a transparent thin film that dries at room temperature. It allows for easy fluorination of knife surfaces. It does not leave tape or glue residue and does not affect cutting performance.

"Fluoro Surf FG-5093 Series" Numerous achievements with blades such as Thomson blades and scissors! After applying with a brush or spray and wiping, a non-stick property is imparted to the surface of the metal blade after leaving it at room temperature for 10 minutes, making it difficult for adhesives and tapes to adhere. The fluororesin, at a film thickness at the nanometer level, reacts and adheres tightly to the surface, providing excellent durability. When performance degrades, reapplication will restore the performance. It can be easily processed in-house, allowing for significant cost reductions compared to traditional fluororesin processing. 【Features】 ■ Reacts with blade materials for strong adhesion, allowing for continuous use. ■ The film thickness is only a few nanometers, which does not negatively affect the sharpness of the blade. ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for external processing. ■ No need to remove the film during reapplication. ■ Not classified as an organic solvent. Low odor and non-flammable. Maintains a good working environment, and management items required by fire safety and occupational health laws (quantity management, organic inspections, environmental measurement reports) are not necessary. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Anti-fouling coating agent - Non-stick fluorine surface treatment for blades at our own site.

A non-stick coating agent in the form of a transparent thin film that dries at room temperature. It allows for easy fluorination of knife surfaces. It does not leave tape or glue residue and does not affect cutting performance.

"Fluoro Surf FG-5093 Series" Numerous achievements with blades such as Thomson blades and scissors! After applying with a brush, spray, or cleaning cloth and leaving it at room temperature for 10 minutes, a non-stick property is imparted to the surface of the metal blade, making it difficult for adhesives and tapes to adhere. The fluororesin reacts and adheres tightly to the surface at a film thickness on the nanometer level, providing excellent durability. Even when performance degrades, reapplication will restore the performance. It can be easily processed in-house, allowing for significant cost reductions compared to traditional fluororesin processing. 【Features】 ■ Reacts with blade materials and adheres strongly, allowing for continuous use. ■ The film thickness is only a few nanometers, so it does not negatively affect the sharpness of the blade. ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for external processing. ■ No need to remove the film during reapplication. ■ Not classified as an organic solvent. Low odor and non-flammable. Maintains a good working environment, eliminating the need for management items specified by fire laws and safety regulations (quantity management, organic inspections, environmental measurement reports). *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Anti-fouling coating agent practical example: Prevention of fingerprint adhesion on glass showcases.

By applying FluoroSurf FG-5084 to the surface of glass cases in jewelry stores and various shops, it becomes easy to wipe off fingerprints. The performance lasts for a long time.

It can be easily applied with a transparent coating, providing long-lasting (over 1 year) dirt-repellent properties to glass surfaces. ■ A durable dirt-repellent coating is needed without changing the appearance. ■ It is non-flammable and low-odor, making it safe to apply in stores. Fluorosurf FG-5084 is also used for dirt prevention on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Anti-fouling coating: imparting anti-fouling properties and fingerprint reduction to optical films.

By adding just a small amount to UV-curable acrylic hard coat agents, you can impart functionalities such as anti-fouling (fingerprint reduction), low refractive index, and slip properties.

FluoroSurf FS-702X series is a fluorine-based additive for UV-curable hard coatings. When processing UV-curable hard coatings on optical films, simply adding a small amount of FluoroSurf FS-702X to the hard coating can impart functionalities such as anti-soiling (fingerprint reduction), low refractive index, and slip properties. After addition, the fluorine components rise to the surface of the hard coating and exhibit their functions, and during UV irradiation, they co-polymerize with the components of the hard coating to become integrated. By integrating, this product's functionality possesses abrasion resistance. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

others
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Additive for UV hard coat: Provides anti-soiling and fingerprint reduction properties.

By adding just a small amount to UV-curable acrylic hard coating agents, you can impart functionalities such as anti-fouling (fingerprint reduction), low refractive index, and slip properties.

FluoroSurf FS-702X series is a fluorine-based additive for UV-curable hard coatings. When processing UV-curable hard coatings on optical films, simply adding a small amount of FluoroSurf FS-702X to the hard coating can impart functionalities such as anti-soiling (fingerprint reduction), low refractive index, and slip properties. After addition, the fluorine components rise to the surface of the hard coating and exhibit their functions, and during UV irradiation, they co-polymerize with the components of the hard coating to become integrated. By integrating, this product's functionality possesses abrasion resistance. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

others
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

指紋防止コーティング剤　フロロサーフ

各種素材への指紋の付着を強力に抑制！　ふき取りが簡単になります。常温で簡単に施工可能。使用現場での再塗布も容易です。

防汚コーティングとは、製品を汚れから守る加工のことです。指紋の付着や油脂の汚れ、水垢などが簡単に除去できるようになります。日々のメンテナンスの手間を省くことができます。【こんなケースに威力を発揮します】 ■タッチパネル表面の指紋を簡単に除去できるようにしたい ■タッチパネルの滑り性をアップし、操作感を向上させたい ■指紋や汚れの清掃時間の短縮化を図りたい ■外観を変えずに、耐久性のある防汚コーティング剤が必要 ■金属表面にスケール（白シミ）が付着して取れなくなる。 ■ステンレス製の操作盤や内扉において指紋が目立つ。 ■ディスプレイに使用されるフィルムの透過率向上と指紋防止。 ■操作時の滑り性アップ。 ※無料サンプルご希望の方は、お問い合わせ内容に「サンプル希望」とご記載下さい。

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Anti-fouling coating, fingerprint-resistant coating, can be easily applied at room temperature.

Strongly suppresses the adhesion of fingerprints and dirt on various materials! Wiping off is also easy. Can be easily applied at room temperature. Reapplication on-site is also simple.

By applying an anti-fouling coating, fingerprints, oils, and water stains become less likely to adhere, making them easy to remove. This helps reduce the hassle of daily maintenance. 【This is effective in the following cases】 ■ Want to easily remove fingerprints from touch panel surfaces ■ Want to improve the sliding ability of touch panels and enhance the user experience ■ Aim to reduce cleaning time for fingerprints and dirt ■ Need a durable anti-fouling coating that does not change the appearance ■ Scale (white stains) adheres to metal surfaces and becomes difficult to remove. ■ Fingerprints are prominent on stainless steel control panels and inner doors. ■ Improve the light transmittance of films used on displays and prevent fingerprints. ■ Increase sliding ability during operation. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-stick coating: Transparent non-stick coating can be easily applied at room temperature.

Power of fluorine strongly prevents adhesion of adhesives and dirt! The transparent thin film surface treatment can be easily applied at room temperature. Recoating on-site is also easy.

The simplified fluorine coating exhibits strong non-stick properties. By applying the coating, it becomes difficult for adhesives to adhere, and it also reduces dirt such as fingerprints, grease, and water stains. Furthermore, it can be easily removed. This can save you the hassle of daily maintenance. 【This is effective in the following cases】 ■ Preventing adhesive from sticking to metal knives and scissors ■ Ensuring that tape does not stick to the blade when cutting adhesive tape ■ Making it easier to remove scale from faucet fixtures ■ Wanting to easily remove fingerprints from touch panel surfaces ■ Improving the slip properties of touch panels to enhance the user experience ■ Aiming to reduce cleaning time for fingerprints and dirt ■ Needing a durable anti-fouling coating that does not change the appearance ■ Scale (white stains) adhering to metal surfaces and becoming difficult to remove ■ Fingerprints being noticeable on stainless steel control panels and inner doors ■ Improving the transmittance of films used on displays and preventing fingerprints ■ Enhancing slip properties during operation *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Moisture-proof coating agent, no explosion-proof required, no environmental measurement required, no regulated substances used.

Numerous achievements in automotive substrates. Environmentally friendly (non-organic solvent + non-hazardous + low odor) moisture-proof coating for printed circuit boards. Cures at room temperature without the need for heating.

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 Series" exhibits protective functions such as moisture resistance, gasoline resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film coating. It has a proven track record in waterproofing and insulation protection of electronic components, as well as moisture and waterproof coatings for mounted circuit boards. It is non-flammable and not classified as an organic solvent, thus free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Additionally, it does not contain any PFOS, PFOA, or PFHxS. 【Performance Features】 ■ High moisture and water resistance → It offers four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ High resistance to acidic substances like lithium battery electrolytes → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ It provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also exhibiting rust prevention effects. ■ It does not contain low molecular compounds, so it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coating agent for improving the release properties of fluororesin-coated molds.

Please try this when the mold does not release well with fluororesin processing. It significantly improves release properties with a top coat. After application in the molding area, air dry for 2 minutes at room temperature.

"FloroSurf FG-5090" is a coating agent that improves release properties by applying it to molds treated with fluororesin. (This product does not contain any PFAS regulated substances such as PFOA, PFOS, or PFHxS.) * It can be applied to molds treated with fluororesin and can be easily applied on the molding site using brushes or spray guns. * Just one application provides a non-stick surface to the mold, demonstrating excellent release properties even for complex and precise shapes. * There is no transfer or accumulation of dirt on the mold or workpiece. * It is non-flammable and does not fall under organic solvent regulations, eliminating the need for explosion-proof equipment, quantity management, and environmental measurement as stipulated by fire and safety laws. * If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine Coating Product List and Ranking from 11 Manufacturers, Suppliers and Companies | IPROS GMS

Fluorine Coating Manufacturer, Suppliers and Company Rankings

Fluorine Coating Product ranking