We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for High Frequency Probe.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

High Frequency Probe×テクノプローブ - List of Manufacturers, Suppliers, Companies and Products

High Frequency Probe Product List

16～28 item / All 28 items

Displayed results
RF MEMS Probe "TP67-Vertical Series"

RF MEMS Probe "TP67-Vertical Series"

Probe repair and tip chip replacement available! Reflection loss (GSG-150um pitch typ.) is -18.0dB.

We would like to introduce our RF_MEMS probe, the 'TP67-Vertical Series'. The frequency range is DC to 67GHz, with a characteristic impedance of 50 ohms. The connector is 1.85mm/F (V/F), and the probe mark size (width) is less than 30um. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe mark ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "TPD26-Angle Series"

RF MEMS Probe "TPD26-Angle Series"

The characteristic impedance is 50 ohms, and the insertion loss (GSGSG-150um pitch typ.) is -0.5dB!

We would like to introduce our RF_MEMS probe, the 'TPD26-Angle Series'. The frequency range is DC to 26.5GHz, and the connector is 3.5mm/F. Additionally, the probe pitch can be selected from 50 to 1,000um. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "TPD26-Vertical Series"

RF MEMS Probe "TPD26-Vertical Series"

Probe repair and tip replacement are possible! The probe configuration is GSSG and GSGSG!

We would like to introduce our RF_MEMS probe, the 'TPD26-Vertical Series'. The frequency range is DC to 26.5GHz, with an insertion loss (GSGSG-150um pitch typ.) of -0.5dB. Additionally, it features a low-loss, low-reflection air coplanar probe design. Please feel free to contact us when you need assistance. 【Features】 ■ Low-loss, low-reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip chip replacement available (Note: Repair may not be possible depending on the extent of damage) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "TPD67-Vertical Series"

RF MEMS Probe "TPD67-Vertical Series"

The dielectric strength is 100V, and the crosstalk (GSGSG-150um pitch typ.) is -35.0dB!

We would like to introduce our RF_MEMS probe, the 'TPD67-Vertical Series'. The frequency range is DC to 67GHz, with an insertion loss (GSGSG-150um pitch typ.) of -1.2dB. Additionally, the probe can be repaired and the tip chip can be replaced. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip chip replacement available (Note: Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "TPD110-Angle Series"

RF MEMS Probe "TPD110-Angle Series"

The probe configuration is GSGSG! It is a low-loss, low-reflection air coplanar probe design.

We would like to introduce our RF_MEMS probe, the 'TPD110-Angle Series'. The connector is 1.0mm/F, and it can accommodate pitches from 50 to 150um. The crosstalk (GSGSG-150um pitch typ.) is -20.0 to -30.0dB. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Available in probe pitches from 50 to 1,000um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe 'TPWR6'

RF MEMS Probe 'TPWR6'

Selectable probe pitch from 50 to 1,000 µm! Probe mark size (width) is 30 µm or less.

We would like to introduce our RF_MEMS probe 'TPWR6' that we handle. The needle material is nickel alloy, and the housing material is aluminum alloy, with a recommended needle pressure (overdrive = 20-30um) of 20gf. Please feel free to contact us when you need assistance. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF_MEMS Probe "TPWR12"

RF_MEMS Probe "TPWR12"

Selectable probe pitch from 50 to 1,000 µm! The contact resistance (to gold pads) is 0.05 ohms.

We would like to introduce our RF_MEMS probe 'TPWR12' that we handle. The breakdown voltage is 100V, and the rated current is 1A, with a contact life (when using an auto-prober) of 1 million cycles. Please feel free to contact us when you need assistance. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch can be selected from 50 to 1,000um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "TPWR15"

RF MEMS Probe "TPWR15"

Probe repair and tip chip replacement available! Contact resistance (to gold pad) is 0.05 ohm.

We would like to introduce our RF_MEMS probe 'TPWR15' that we handle. The reflection loss (typ. GSG-150um pitch) is -5.0dB, the power tolerance is 5W, and the probe mark size (width) is less than 30um. Please feel free to contact us when you need assistance. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe scars ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "WR12-Tall Series"

RF MEMS Probe "WR12-Tall Series"

Probe repair and tip replacement possible! Rated voltage 100V, rated current 1A.

We would like to introduce our RF_MEMS probe, the 'WR12-Tall Series'. The probe's needle material is nickel alloy, and the housing material is aluminum alloy, with a probe mark size (width) of less than 30um. Please feel free to contact us when you need assistance. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe scars ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "WR15-Tall Series"

RF MEMS Probe "WR15-Tall Series"

Low loss, low reflection air coplanar probe design! The needle material is nickel alloy.

We would like to introduce the 'WR15-Tall Series' that we handle. The contact life (when using an auto-prober) is 1 million cycles, with a withstand voltage of 100V, a withstand current of 1A, and a power rating of 5W. Please feel free to contact us when you need assistance. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip replacement available (Note: Repair may not be possible depending on the condition of damage) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF Cantilever Probe "Cantilever Series"

RF Cantilever Probe "Cantilever Series"

Supports up to 10 ports! Flexible probing performance with cantilever structure.

We would like to introduce the RF_Cantilever probe, part of our "Cantilever Series." This probe features a cantilever design optimized for RF probes, allowing for custom configurations and pitch. Additionally, it can be modified for high-power device measurement probes. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low-loss, low-reflection coaxial probe design (up to 67GHz) ■ Custom manufacturing for flexible layouts ■ Supports up to 10 RF ports (additional RF ports can be considered upon request) ■ Custom calibration kits can be manufactured, providing optimized constants ■ Short lead time (2 weeks or more) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Data] TCS4-125/175 Calibration Board Instruction Manual

[Data] TCS4-125/175 Calibration Board Instruction Manual

SOLT/TRL calibrator! Introducing array, pad size, pad pitch, and more.

This document includes the calibration board "TCS4-125/175," which can be used for alignment marks and more. It introduces pattern names, mounted component symbols, and more. It is a simple and easy-to-reference book. Please take a moment to read it. 【Contents (partial)】 ■ Pattern names ■ Mounted component symbols ■ Applications ■ Component positions *For more details, please refer to the PDF document or feel free to contact us.

  • Printed Circuit Board

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【NEW】HP Series/HPD Series (High Power RF Probe)

【NEW】HP Series/HPD Series (High Power RF Probe)

Achieves power handling of up to 40GHz and up to 50W (5A/1000V). Accurate measurement of RF high-power devices is possible.

○ Fusion of the latest high-frequency technology and mechanical performance ○ Adoption of special materials with excellent power handling ○ Design suitable for characteristic evaluation of various high-power devices represented by GaN (gallium nitride) and SiC (silicon carbide) ○ Robust probe tip ○ Uniform flatness and stable contact

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.