Holder

CC holder

Please choose the most suitable model according to the construction site, such as around collaborative robots!

The "CC Holder" is a holder that supports the dynamic load of cables and air hoses in robotic movements. The diameter of the holding part can be adjusted based on the number of cables and the size of the flexible conduit. It accommodates various band fixing methods and includes measures to prevent positional displacement. Please choose the appropriate model according to the installation location, such as around collaborative robots. 【Features】 ■ The diameter of the holding part can be adjusted based on the number of cables and the size of the flexible conduit. ■ The flexible conduit is secured by protrusions inside the holder. ■ The holder can be released from fixation using a flathead screwdriver. ■ The holder moves flexibly. ■ The tightening cap rotates, allowing for movement and fixation of the holder. *For more details, please refer to the related links or feel free to contact us.

企業：ハギテック本社工場
価格：Other

Other cable related products

製品を詳しく見る

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

DH holder (DIN rail compatible noise filter mounting bracket)

Just tighten one fixed screw! Noise filter installation auxiliary bracket.

The "DH Holder (DIN Rail Compatible Noise Filter Mounting Bracket)" is a product manufactured by Shinohara Electric that can be mounted on a DIN rail to assist in the installation of noise filters. By simply tightening one fixing screw, it can be secured at any position on the DIN rail, eliminating the need for direct attachment to the back panel. The mounting screws use flat-head screws to ensure a flat mounting surface. To facilitate easy installation of noise filters, it is pre-tapped. Additionally, it can also accommodate Shinohara's push button mounting brackets (PBK series). 【Features】 ■ Can be fixed at any position on the DIN rail ■ No need for direct attachment to the back panel ■ Uses flat-head screws for mounting ■ Pre-tapped for easy installation ■ Compatible with Shinohara's push button mounting brackets (PBK series) *For more details, please refer to the PDF document or feel free to contact us.

企業：篠原電機
価格：Other

Board materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Holder "Trivoss"

A new standard for tool holders! TRIBOS chuck

"Trivoss" is a high-precision holder that employs a 3-Point clamp. By utilizing shape changes due to pressure, it is lightweight and has good rotational balance, which improves the surface quality of cutting, reduces material loss, increases production speed, and lowers the risk of router damage accidents, among various other benefits. Additionally, it does not require consumable collets and can be reused repeatedly without losing accuracy with general storage, providing a high overall economic effect. [Features] ■ Runout accuracy of 0.003mr ■ High precision ■ Adopts a new clamping method ■ Achieves complete balance ■ Maintenance-free with no need for part replacement *For more details, please refer to the catalog or feel free to contact us.

企業：ロイコ・ジャパン
価格：Other

others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Holder Major Dream Holder

Machines come to life, blades come to life.

The revolutionary holder of the 21st century created by Nikken.

企業：日研工作所
価格：Other

Other cutting tools

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

CPUMF | Small Form Factor PC (Compact PC) Holder

You can install a compact PC on the wall, the back of the display, or in the wall channel! Compatible with models without VESA standards.

ICWUSA, a leading manufacturer of commercial monitor arms in the United States, offers holders for small form factor PCs. CPUMF: Wall mount type CPUMFM: Wall channel mount type for use in hospitals CPUMF + MINIPC1212: A set for mounting on the back of the VESA bracket of ICWUSA monitor arms *For more details, please visit the external link page or feel free to contact us.

企業：Axuas Co., Ltd.
価格：Other

Other machine elements

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

NX holder

This is a tool that can perform back chamfering on intersecting holes with a diameter of Φ2 or larger using NC lathes and machining centers.

A back chamfering tool with built-in floating mechanism. ◆ Can be processed from either the shaft hole or the intersecting hole ◆ Applicable for chamfered hole diameter: Φ0.1mm and above 　　　　Tool insertion hole diameter: Φ2.0mm and above ◆ Used by rotating either the workpiece or the holder ◆ Two complex-shaped holders perform clockwise and counterclockwise rotation to remove burrs ◆ A simple NC program that only moves the cutter to the specified position ◆ No need for tool correction even if there is a deviation in the position of the chamfered hole

企業：クロイツ
価格：Other

lathe
Other processing machines
Other industrial robots

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

TPS holder

Reduces taper deformation of the holder itself! A lineup of four types of products.

This product is an original straight holder that simplifies the removal of chips. When replacing the spot chip, you can easily remove the chip by lightly tapping the head part of the holder. By applying even force during removal, it does not damage the taper of the chip compared to a standard straight holder. 【Features】 ■ Supports a wide range of processing from 2mm to 3m in length, and up to 400mm in diameter for round materials ■ From small lots of 1 piece to mass production ■ Machining, deep hole processing, bending processing, and joining processing ■ Compatible with various workpieces using the five-axis machining center "DMU 65 monoBLOCK" ■ Capable of cutting materials regardless of type with a water jet *For more details, please download the PDF or feel free to contact us.

企業：ナツメ
価格：Other

Other metal materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

47 Holder

The task is easy and convenient! It can also be used for the analysis of captured objects.

The "47 Holder" is a product designed for liquids that do not come into contact with metals, with all components made of polypropylene. It is capable of filtering small quantities of many chemical products. Filtration is performed by connecting an NPT thread to a syringe. The operation is simple and convenient, and it can also be used for the analysis of captured substances. 【Features】 ■ Designed for liquids that do not come into contact with metals ■ All components are made of polypropylene ■ Capable of filtering small quantities of many chemical products ■ Filtration is performed by connecting an NPT thread to a syringe *For more details, please refer to the PDF document or feel free to contact us.

企業：日本コベッタ
価格：Other

Filtration Equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Is there a holder that you have given up on repairing and are planning to dispose of?

Is there a holder that has been discarded because it was given up on being repaired? It can be refurbished at Fuji Seiko!

Are there any holders that you have given up on repairing and are planning to dispose of? If it's from Fuji Seiko, it might be possible to restore it through repair. Please feel free to consult with us.

企業：富士精工
価格：Other

Other cutting tools

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

DH holder (socket mount type) one-touch type

When installing a socket on a DIN rail

【Features】 Once the outlet is attached to the bracket, it can be easily mounted onto the DIN rail with a single touch without the need for tools, thus saving labor. Additionally, during maintenance, it can be attached and detached without removing the outlet from the bracket. *For more details, please refer to the PDF document or feel free to contact us.*

企業：篠原電機
価格：Other

Board materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

DIN rail mounting bracket DH holder for plug-type fuse installation

By tightening just one fixing screw, it is possible to secure the plug-type fuse connection base.

The "DH Holder Plug Type Fuse Mounting Type" is a structural material for panels that allows you to secure a plug type fuse connection base at any position on a DIN rail by simply tightening one fixing screw. It uses countersunk screws for the mounting screws (with the mounting screw holes processed to be recessed), making the mounting surface flat. The connection base for the plug type fuse is pre-tapped for easy installation. Please use it as a mounting bracket when securing the Fuji Electric plug type fuse connection base (model number: AFA60) to our DIN rail. 【Features】 - Can be secured at any position on the DIN rail by simply tightening one fixing screw. - Uses countersunk screws for the mounting screws (with the mounting screw holes processed to be recessed), making the mounting surface flat. - Pre-tapped for easy installation of the plug type fuse connection base. *For more details, please refer to the PDF document or feel free to contact us.

企業：篠原電機
価格：Other

Board materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Large diameter "R" zero holder 'CTZ・SA'

Set the blade tip deviation as close to zero as possible! It is ideal for finishing work with a large diameter reamer!

This product is a large diameter "R" zero holder that eliminates blade runout to zero quickly, easily, and reliably using our unique four-point adjustment method. By simply turning the four adjustment screws with a wrench, you can adjust the runout precision to between 0 and 2 μm. By suppressing the runout of the cutting edge, variations in machining dimensions are eliminated, enabling high-precision finishing. 【Features】 ■ Stable hole diameter ■ Improved surface roughness ■ Increased tool life ■ Set the runout of the cutting edge to as close to "zero" as possible ■ A series of adjustment tasks can be completed in about 60 seconds *For more details, please refer to the PDF document or feel free to contact us.

企業：エヌティーツール
価格：Other

Other cutting tools

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Silicon wafer Silicon wafer deposition product

We provide dummy wafers and various types of film-forming wafers, which are essential for thin wafers under 100μm and research and development.

Semiconductors installed in various information and communication devices that form a highly information and communication-oriented society are being developed with cutting-edge technologies by various companies. Our company provides essential tools for advanced technology development, including thin wafers of less than 100μm, dummy wafers, various film-coated products for wafers, TEG products, and prober evaluation supplies for various development experiments and equipment evaluations. Additionally, we also perform wafer recycling as a means of resource reuse, so please feel free to contact us. *We have materials for solar cells available.

企業：テクノライズ株式会社
価格：Other

Casting Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

DK (original chip) various holders

We will carry out additional processing for standard chips and manufacture custom products from scratch! We select materials suitable for the processing work and respond with small lot production and short delivery times.

The technical capabilities of Nikken Tool are demonstrated in the used chip reuse system, which has received high praise from many customers. In particular, high-cost tools are beneficial in reducing tool expenses by being ground and reused multiple times. The work procedure manuals enable a stable supply of quality, which has been recognized as being usable just like new products. Nikken Tool refers to this category as <RG>. On the other hand, our original chips are created from unique planning <DK>. Among them, the custom-made products called "special types" are processed individually according to customer requests. 【Features】 - Support for small lots and short delivery times - Proposals for chips tailored to customer needs - Cost reduction *For more details, please contact us or refer to the catalog.

企業：日研ツール大阪営業所
価格：Other

Other cutting tools

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

We will carry out additional processing for standard chips and manufacture custom products from scratch! We select materials suitable for the processing work and respond with small lot production and short delivery times.

For cutting tools and indexable tips (throwaway tips), leave it to NTC! From the production of special shapes and custom tips to consultations on chipping, abnormal wear measures, and extending tool life, we will provide proposals that you will find "cheap and very affordable." Not only can we create custom-made tips, but we also accept shape and coating changes (PVD coating) for off-the-shelf products in small quantities. If you have any issues with cutting tools such as lathes or cutters, please feel free to consult us. Additionally, we offer a wide range of "beneficial" proposals, including cost reduction through the regrinding and reuse of used new TA tips and the purchase (recycling) of used tools. Material compatibility range: carbide (tungsten), cermet, sintered diamond (PCD), cBN Cutting tool shape compatibility range: ground shaped tips, drills, end mills, reamers, brazing tools *For more details, please contact us or refer to our catalog.

企業：日研ツール大阪営業所
価格：Other

Other cutting tools

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Holder - メーカー・企業18社の製品一覧とランキング

Holderのメーカー・企業ランキング

Holderの製品ランキング

Holderの製品一覧

CC holder

DH holder (DIN rail compatible noise filter mounting bracket)

Holder "Trivoss"

Holder Major Dream Holder

CPUMF | Small Form Factor PC (Compact PC) Holder

NX holder

TPS holder

47 Holder

Is there a holder that you have given up on repairing and are planning to dispose of?

DH holder (socket mount type) one-touch type

DIN rail mounting bracket DH holder for plug-type fuse installation

Large diameter "R" zero holder 'CTZ・SA'

Silicon wafer Silicon wafer deposition product

DK (original chip) various holders

Holder

Holderの関連カテゴリ