We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Machining.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Machining×旭洋精工 - List of Manufacturers, Suppliers, Companies and Products

Machining Product List

1～3 item / All 3 items

Displayed results
[Case Study] Cost Reduction through Tolerance Relaxation

[Case Study] Cost Reduction through Tolerance Relaxation

Due to the relaxation of tolerances, polishing the inner diameter is no longer necessary, resulting in cost reduction!

During the processing of POM material products, there was a challenge where the tolerance for the inner diameter was strict in machining, and performing polishing resulted in higher unit costs. Therefore, since a shaft with a negative tolerance would be inserted, it was determined that the H7 tolerance was unnecessary, and the tolerance was relaxed to what could be achieved through cutting processing. As a result, polishing the inner diameter was no longer necessary, leading to a reduction in costs. Our company can propose VE (Value Engineering) ideas by providing information about the type of parts that will be inserted. 【Overview】 ■ Issues - The tolerance for the inner diameter is strict in machining, and polishing leads to higher unit costs. ■ Solution - Since a shaft with a negative tolerance will be inserted, it was determined that the H7 tolerance was unnecessary, and the tolerance was relaxed to what could be achieved through cutting processing. ■ Effect - Polishing the inner diameter was no longer necessary, resulting in cost reduction. *For more details, please refer to the PDF document or feel free to contact us.

  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Cost Reduction through Shape Modification

[Case Study] Cost Reduction through Shape Modification

The shape change led to a reduction in processing time, allowing us to keep the estimated unit price down!

To process R6.0, there was a challenge due to the need for selecting processing equipment and the significantly long processing time, which resulted in a high unit price. By changing R6.0 to φ11.0, we were able to only perform an H cut on the φ11.0 material diameter, leading to a reduction in processing time and allowing us to keep the estimated unit price down. 【Overview】 ■ Issues - Processing R6.0 requires selecting processing equipment and takes a significant amount of time, resulting in a high unit price. ■ Solution - Change R6.0 to φ11.0 - Only perform an H cut on the φ11.0 material diameter, leading to reduced processing time. ■ Effect - We were able to keep the estimated unit price down, which led to receiving orders. *For more details, please refer to the PDF document or feel free to contact us.

  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Cost Reduction by Increasing the Estimate LOT

[Case Study] Cost Reduction by Increasing the Estimate LOT

By increasing the lot size of parts that are repeated every month, we were able to lower the estimated unit price.

A client inquired whether it was possible to reduce costs for parts they are sourcing from another company. As a solution, since the parts were ordered on a monthly repeat basis, we lowered the estimated unit price by quoting for 3 LOTs. As a result, we were able to significantly reduce the price compared to the competitor's unit price. At our company, while it will be subject to consultation with the customer, we can also accommodate deliveries of 1 LOT every month. 【Overview】 ■ Issue - Is it possible to reduce costs for parts sourced from another company? ■ Solution - Since the parts were on a monthly repeat basis, we lowered the unit price by quoting for 3 LOTs. ■ Effect - We were able to significantly lower the price compared to the competitor's unit price. *For more details, please refer to the PDF document or feel free to contact us.

  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.