We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Measurement sensor.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Measurement sensor Product List and Ranking from 33 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.

Measurement sensor Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.

  1. シスコム（SysCom） Tokyo//Trading company/Wholesale
  2. ニシム電子工業 総務部　総務Gr Fukuoka//Industrial Electrical Equipment
  3. シリコンセンシングシステムズジャパン Hyogo//Electronic Components and Semiconductors
  4. 4 Q'sfix （キューズフィックス） Tokyo//Testing, Analysis and Measurement
  5. 4 アーカイブティップス 本社 Tokyo//Trading company/Wholesale
Go to Company Ranking

Measurement sensor Product ranking

Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.

  1. Wireless gyro accelerometer inertial unit シスコム（SysCom）
  2. [IT Sensors for Agriculture] LTE-M Version MIHARAS ニシム電子工業 総務部　総務Gr
  3. EMG (surface electromyography) measurement system EMG amplifier Q'sfix （キューズフィックス）
  4. High-precision 6-axis inertial measurement unit 'DMU41' シリコンセンシングシステムズジャパン
  5. 4 Wearable muscle oxygen saturation measurement sensor アーカイブティップス 本社

Measurement sensor Product List

16～30 item / All 39 items

Displayed results
[IT Sensors for Agriculture] LTE-M Version MIHARAS

[IT Sensors for Agriculture] LTE-M Version MIHARAS

Easy to start! Usable anywhere in mobile phone areas!

The agricultural IT sensor "MIHARAS" supports the "labor-saving monitoring" and "productivity improvement" of fields. *Even in large-scale and decentralized fields, environmental data can be easily monitored from your location. 【Three Features of LTE-M Version MIHARAS】 ■Feature 01: System installation at low cost - Achieved cost reduction by adopting in-house developed sensors - Available at lower communication costs than conventional mobile phone lines (4G/LTE) through LTE-M communication ■Feature 02: Communication possible anywhere within mobile phone coverage (equivalent to LTE) - Communication is possible in mobile phone service areas by utilizing carrier base stations - Communication occurs on carrier-specific frequencies, making it less prone to radio interference with other LPWA ■Feature 03: Easy installation - Approximately 1/3 shorter and lighter than the LoRa version (compared to our products) - No assembly or configuration of the sensor terminal is required - Ready for use immediately after installation *For more details, please refer to the PDF document or check the product site at the URL below.

  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Energy Literacy Platform (Electric Meter)

Energy Literacy Platform (Electric Meter)

No installation required! Cloud-connected power measurement sensor (power meter)!!

This is a power data acquisition service that requires no construction and is easy to install. You can check information such as power consumption and usage time for each electrical device (system) in real-time on your PC or smartphone, and the measured data can also be output in CVS format via a web browser. The analysis of the acquired data can be useful for various applications, including improving operational efficiency and detecting anomalies in equipment.

  • Company：Sassor
  • Price：10,000 yen-100,000 yen
  • Data Logger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Die-casting dedicated measurement sensor

Die-casting dedicated measurement sensor

Sensor development is the origin of measurement! Key technologies that support the super die-casting method.

We are developing a "die-casting dedicated measurement sensor" that supports the super die-casting method. The molds are responsible for producing die-cast products (good quality). There is no improvement in quality without knowing the information inside the mold. We measure the gas pressure within the actual casting cavity and the internal pressure of the cavity metal to clarify the factors that lead to quality deterioration. 【Product Lineup】 ■ Metal gas filter (used in conjunction with a 1-channel measurement dedicated air unit) ■ Coupled ultra-small pressure sensor (semiconductor AMP internal remote sensing sensor) ■ Load sensor (semiconductor AMP built-in strain sensor) ■ New wire speed meter (with mechanical mechanism) ■ Direct sensor *For more details, please download the PDF or feel free to contact us.

  • Other contract services
  • Other services
  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
What is the latest method for examining the shape and deformation of structures, known as the Sampling Moiré Method?

What is the latest method for examining the shape and deformation of structures, known as the Sampling Moiré Method?

Many objects undergo significant deformation when force is applied, ultimately leading to failure. By studying this deformation, it becomes possible to achieve prevention, prediction, and repair.

Many structures built during the period of rapid economic growth are approaching the end of their lifespan. In particular, to ensure the safety of infrastructure such as bridges and buildings, it is necessary to evaluate their integrity. One important method for confirming their integrity is to examine the shape and deformation of the structures. Additionally, it is essential to verify the strength of newly developed structures with actual models. Representative methods for examining the shape and deformation of structures include the "Image Correlation Method," "Grid Method," "Moire Method," and particularly the newer "Sampling Moire Method." [Features] - Image Correlation Method: Randomly capture images and find patterns with the same features after deformation to investigate displacement. - Grid Method: Capture images of a regularly spaced grid pattern and examine the phase of the grid to determine displacement. - Moire Method: Overlay grids before and after deformation to investigate displacement through the resulting moire fringes. - Sampling Moire Method: Investigate displacement by capturing only the grid after deformation. *For more details, please refer to the PDF document or feel free to contact us.

  • 3D measuring device
  • Other measurement, recording and measuring instruments
  • Other inspection equipment and devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-precision 9-axis inertial measurement unit (IMU) LPMS-IG1/IG1P

High-precision 9-axis inertial measurement unit (IMU) LPMS-IG1/IG1P

For industrial environments requiring high-precision and low-latency measurements! MEMS 9-axis IMU equipped with sensor fusion capabilities.

The "LPMS-IG1" is an IMU sensor that detects direction and acceleration, measuring with high precision. The "LPMS-IG1P" is a product that adds GPS measurement functionality for automotive applications to the LPMS-IG1. The case is waterproof (IP67), and with a powerful CPU, it processes data from the gyroscope, accelerometer, and magnetometer, calculating results in real-time with low drift and high precision. It is suitable for industrial environments where high precision and low latency measurements are required. 【Features】 ■ Waterproof design (IP67) ■ MEMS 9-axis IMU with sensor fusion capabilities ■ Equipped with a low noise/low drift (4℃/1h) accelerometer ■ Real-time calculation of posture/linear acceleration within the sensor *For more details, please refer to the PDF document or feel free to contact us.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Layered technology for breaking the limits of Moore's Law [TSV processing technology]

Layered technology for breaking the limits of Moore's Law [TSV processing technology]

WF processing, creation of test WFs, through wiring boards (interposers), etc.! Various MEMS processing services including EB exposure, DRIE, and anodic bonding.

Our company offers a variety of MEMS (Micro Electro Mechanical Systems) processing services, including EB lithography, DRIE, and anodic bonding, based on our extensive knowledge and experience gained from semiconductor processing. We provide a wide range of services, including development product processing, elemental technology processing, deep silicon etching, and various film deposition. Additionally, we are also engaged in minimal fab. You can check the important issues regarding process technology in TSV formation through PDF downloads. 【Processing Details】 ■ Pre-treatment (RCA cleaning) ■ Film deposition (thermal Si oxidation film, CVD deposition [SiO2, SiN], metal deposition [Al, Al-Si, Al-Cu, Cu, Ti, W, Mo]) ■ Photolithography (contact aligner, stepper, EB lithography) ■ Etching (wet etching, dry etching, DRIE) ■ Electrodeposition (Cu plating, Ni plating, Au plating) ■ Bonding (anodic bonding, metal-metal bonding, plasma activated bonding) *For more details, please download the PDF or feel free to contact us.

  • Company：M.T.C
  • Price：Other
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wireless gyro accelerometer inertial unit

Wireless gyro accelerometer inertial unit

With a 200G range, 3200Hz sampling is possible! An IMU equipped with gyro and accelerometer sensors. The app also includes rich features like 3D views and graphs.

In addition to a 3-axis accelerometer, this inertial measurement unit is equipped with a 3-axis gyroscope, a 3-axis magnetic sensor, a barometric sensor, and a temperature sensor, allowing for the simultaneous acquisition of a large amount of information. The accelerometer features two systems: ±24g (400Hz) and ±200g (3200Hz), making it suitable not only for vibration measurement but also for impact measurement. With open Wi-Fi communication, measurements can be started and stopped from a distance. This allows for real-time graph monitoring and accurate understanding of the measurement status. In addition to Wi-Fi, it has multiple interfaces including USB cable, Bluetooth, and serial, making it easy to integrate into systems. It can be used in various fields such as robotics, biomechanics, drones, and motion capture. There is also a mode that starts measurement simply by turning on the power, and it is possible to synchronize multiple units (optional), demonstrating that the more you use it, the more capable this product is.

  • HPから抜粋_9_16対9.png
  • HPから抜粋_4.png
  • Other inspection equipment and devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sensor for measuring CO2 gas concentration (for incubators)

Sensor for measuring CO2 gas concentration (for incubators)

In-house manufactured CO2 sensors for incubator manufacturers.

Power supply: DC 12~24V Measurement range: 0-20% CO2 Output form: 0-1V DC

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Beam Measurement Sensor Smart ProCo H650 Series

Beam Measurement Sensor Smart ProCo H650 Series

A multi-measuring instrument that can perform the measurements necessary for optical alignment with a single device.

■Reduction of adjustment time - Measurements necessary for beam adjustment can be performed with a single measuring device, eliminating the need for attaching and detaching the device. - Measurement of the beam divergence angle is possible, allowing for ideal collimation adjustment. ■Space-saving adjustments - Compact and high-precision measurements are possible.

  • Optical Measuring Instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Temperature Measurement Sensor | SEMITEC

Temperature Measurement Sensor | SEMITEC

A temperature sensor with the features of "ultra-compact," "high-speed response," and "non-contact." It is ideal for medical, healthcare, and wearable devices.

<Thermometer> ●ET-3H Achieves a more compact design than conventional products! It features very small temperature measurement errors due to the high-precision classification of thermistor characteristics. ●FT-ZM A unique product from SEMITEC! Created through the thin-film technology of thermistors that is not found in other companies! The characteristics of the thin-film thermistor "FT series," being "thin" and "compact," allow for surface contact with the measurement part, achieving a 70% increase in response speed compared to the conventional "ET-3H." <Catheters> ●Fμ Sensor Offering ultra-small sensors with diameters of 0.5 mm and 0.3 mm! This is a small and high-precision thermistor sensor created through thin-film technology and microfabrication technology. The development of the thin-film thermistor Fμ series not only allows for miniaturization but also incorporates trimming technology to ensure uniform thermistor characteristics, achieving high precision (characteristic tolerance ±0.3%). This product has a proven track record in medical (catheter) applications. <Ear Thermometer> ●Thermopile It can detect infrared radiation emitted from the eardrum, allowing for non-contact body temperature measurement! It is used in "ear thermometers" and also in forehead thermometers commonly seen during the COVID-19 pandemic.

  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[VICON] Evaluation Device 'Blue Trident'

[VICON] Evaluation Device 'Blue Trident'

Measuring acceleration to the fullest extent! Leading inertial data measurement into a new era.

The "Blue Trident" is an evaluation device that allows sports biomechanics researchers, sports orthopedic surgeons, trainers, athletes, and professional teams to track and analyze performance in a cost-effective and straightforward manner. By combining it with motion capture, hybrid measurement is achieved. The HighG and LowG sensors simultaneously measure data to avoid magnetic saturation, ensuring high-precision data. Additionally, it can be used in various sports, including swimming, thanks to its waterproof and dustproof specifications. 【Features】 ■ Dual-G IMU capable of measuring up to 200G ■ IP68 dustproof/waterproof rating ■ Maximum battery life of 12 hours ■ 1GB of onboard memory ■ Selectable post-processing options ■ Gyroscope capable of measuring up to 2000 deg/sec ■ Compatible with VICON *For more details, please refer to the PDF document or feel free to contact us.

  • Other electronic measuring instruments
  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Inertial Measurement Unit (IMU) for Small Satellites

Inertial Measurement Unit (IMU) for Small Satellites

Low-cost, short-delivery inertial measurement unit for small satellites.

We provide a low-cost, short-delivery small inertial measurement unit (IMU) that can be used for attitude control and other applications in small satellites, including CubeSats. The IMU consists of gyros (in a redundant configuration), a 3-axis accelerometer, two geomagnetic sensors, and a temperature sensor.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-precision 6-axis inertial measurement unit 'DMU41'

High-precision 6-axis inertial measurement unit 'DMU41'

A high-precision MEMS inertial measurement device that replaces the IMU equipped with a fiber optic gyro. Compared to the old model, it achieves compact size, lightweight, and low power consumption.

The DMU41 is a high-precision MEMS inertial measurement device that replaces the IMU equipped with a fiber optic gyro. Suitable for applications requiring high accuracy, the DMU41 achieves a compact, lightweight, and low power consumption design compared to the previous model, the DMU30. The previous model (DMU30) has a proven track record in a wide range of applications, including ultra-small satellites, and this product can also be used for the same applications. 【Features】 ■ Improved output accuracy and stability ■ Compact (50mm x 50mm x 50mm) and lightweight (200g) ■ Low power consumption of 1.5W (depending on usage conditions) ■ Various interface options available RS422/RS485/SPI/CAN * Evaluation samples are available for loan. * For more details, please download the PDF or feel free to contact us.

  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Simple posture measurement sensor 'Pocket-IMU2'

Simple posture measurement sensor 'Pocket-IMU2'

Easy to install on various parts of the body! Simple posture measurement sensor with combined accelerometer and gyroscope.

The "Pocket-IMU2" is a simple posture measurement sensor that combines an accelerometer and a gyroscope. It has no location restrictions and enables low-noise, high-precision measurements thanks to the "new LiNb03 gyro" manufactured by Tamagawa Seiki. Additionally, it allows for easy operation to save "3D skeletal CG, graphs, and numerical data." 【Features】 ■ Low-noise, high-precision measurements with the new LiNb03 gyro from Tamagawa Seiki ■ Pocket-sized dimensions (W42×D48×31mm) and weight (approximately 50g) ■ Wireless communication powered by a lithium-ion battery ■ Measurement without location restrictions ■ Easy saving of "3D skeletal CG, graphs, and numerical data" *For more details, please refer to the external link page or feel free to contact us.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Optical Interference (WLI) Sensor [Case Study Collection Available]

Optical Interference (WLI) Sensor [Case Study Collection Available]

Anything can be measured in cross-section if light passes through! From thin films to thick plates!

As a practical industrial application sensor, it can be applied to a wide range of inspection fields such as welding inspection and defect inspection of resin sheets and films, as well as film thickness measurement and displacement measurement. If light passes through, cross-sectional measurement of anything is possible. ◆ Please feel free to download the "Case Study Collection" first ◆ For more details, please contact us through the inquiry form.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Measurement sensor

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.