Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
16～30 item / All 34 items
Measuring Fixture "Flat Chuck" CHW Series
■ The main body is available in aluminum and iron. ■ It can chuck items ranging from thin to thick. ■ Maximum load: 100N, 500N, 2kN ■ Chuck opening width: 0 to 15mm ■ Clamping plate dimensions: 20×20mm, 25×25mm ■ Clamping surface shape: flat, pitch 0.8mm
Measuring Jig "Film Chuck" CHF Series
■The material of the main body is aluminum only for CHF-10N-20. The others are made of iron. ■It has a shape specialized for gripping thin materials such as cloth, tape, film, and paper. ■It is a chuck for tensioning. ■Maximum load: 10N to 500N ■Chuck opening width: 0 to 2mm ■Chuck width: 20mm, 50mm, 70mm ■Tightening surface shape: diamond pattern ■Material: aluminum or iron
Measuring Fixture "Round Bar Chuck" CHG Series
■The material of the main body is iron. ■It has a shape specialized for gripping thin round bars, etc. ■It is a chuck for compression and tension. ■Maximum load: 10N ■Chuck opening width: 0.5 to 5Φ ■Clamping surface shape: three-jaw
Measuring Fixture "Winding Chuck" CHR Series
■The material of the main body is iron. ■It is compatible with wires, threads, and other workpieces. ■It is a chuck for tensile use. ■Maximum load: 500 N ■Maximum wire diameter: 0.5 Φ ■Drum diameter: 10 mm
Measuring Fixture "Vice Fixture" GV Series
■The material of the main body is all iron. ■It is suitable for chucking slightly larger workpieces. ■It can be used for both compression and tension. ■Maximum load: 500N, 5kN ■Jaw width: 38mm, 100mm ■Opening: 35mm, 100mm
Measuring fixture "XY Table" XY Series
■The material of the main body is all iron. ■It is suitable for the workpiece's center support during measurement. ■It is mounted on the pressure plate (sample stage) of the stand. ■It is a fixture for positioning. ■Maximum load: 500 N ■X travel: 60 mm (±30 mm) ■Y travel: 60 mm (±30 mm) ■Feed method: screw feed type
The material used is SUS304! Improvements have been made, such as integrating the base into a single piece.
We would like to introduce our "Limit Stress Measurement Jig Ver. 2.0." The material used is SUS304, and the weight is approximately 2 kg. We have made improvements such as integrating the base into a single piece. Additionally, we also accept custom orders for changes in shape and material, so please feel free to consult us when needed. 【Specifications】 ■ Weight: Approximately 2 kg ■ Material: SUS304 ■ Improvements made, such as integrating the base into a single piece *For more details, please refer to the PDF document or feel free to contact us.
Custom modifications for shape and material are also possible! Introducing the Bergen-style 1/4 oval jig.
We would like to introduce our "Limit Stress Measurement Jig Ver.2.1." The compatible test specimens have a thickness of up to 3 mm, a width of 10 to 40 mm, and a length of 100 to 127 mm, with a setup quantity of 1 piece and a band spacing of 8 mm. We have improved it to allow for band adjustments according to the thickness of the test specimen. Additionally, we also accept custom orders for changes in shape and material, so please feel free to consult us when needed. 【Specifications】 ■ Weight: Approximately 2 kg ■ Compatible test specimens ・ Thickness: Up to 3 mm, width 10 to 40 mm, length 100 to 127 mm ・ Setup quantity: 1 piece ・ Band spacing: 8 mm ■ Improved to allow for band adjustments according to the thickness of the test specimen *For more details, please refer to the PDF document or feel free to contact us.
The number of test specimens to be installed is 1 to 6! It is a type that allows multiple specimens to be installed simultaneously.
We would like to introduce our "Limit Stress Measurement Jig Ver.3.0." The compatible test specimens are 1-3 mm thick, 15 mm wide, and 125-150 mm long, with an installation quantity of 1-6 pieces. This type allows for multiple test specimens to be installed simultaneously. We also accept custom orders for changes in shape and material, so please feel free to consult us when needed. 【Specifications】 ■ Weight: Approximately 6 kg ■ Compatible Test Specimens ・ Thickness: 1-3 mm, Width: 15 mm, Length: 125-150 mm ・ Installation Quantity: 1-6 pieces ■ Material: SUS304 ■ Multiple test specimens can be installed simultaneously *For more details, please refer to the PDF document or feel free to contact us.
Equipped with a holding plate to prevent the test pieces from floating! Multiple test pieces can be installed simultaneously.
We would like to introduce our product, the "Limit Stress Measurement Jig Ver.3.1." This version allows for the installation of multiple test specimens simultaneously and includes a holding plate added to prevent the specimens from floating, which was an issue in Ver.3.0. The weight is approximately 6 kg, and it is made of SUS304 material. We also accept custom orders for changes in shape and material, so please feel free to consult us when needed. 【Specifications】 ■ Weight: Approximately 6 kg ■ Compatible Test Specimens ・ Plate Thickness: 1–3 × Width 15 × Length 125–150 mm ・ Installation Quantity: 1–6 pieces ■ Material: SUS304 ■ Allows for the simultaneous installation of multiple test specimens ■ Type with a holding plate added to prevent specimens from floating, as seen in Ver.3.0 *For more details, please refer to the PDF document or feel free to contact us.
Increased adhesion to the curved surface of the test specimen, and improved visibility during work with the addition of scales!
We would like to introduce our product, the "Limit Stress Measurement Jig Ver.3.3." Multiple test specimens can be installed simultaneously. The adhesion to the curved surfaces of the test specimens has been improved, and the addition of scales has enhanced visibility during operation. The weight is approximately 6 kg, and it is made of SUS304. We also accept custom orders for changes in shape and material, so please feel free to consult us when needed. 【Specifications】 ■ Weight: Approximately 6 kg ■ Compatible test specimens - Thickness: 1–3 × Width 15 × Length 125–150 mm - Number of installations: 1–6 pieces ■ Material: SUS304 ■ Multiple test specimens can be installed simultaneously ■ Improved adhesion to the curved surfaces of the test specimens, and enhanced visibility during operation due to the addition of scales *For more details, please refer to the PDF document or feel free to contact us.
