We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Non-destructive Inspection Equipment.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Non-destructive Inspection Equipment Product List and Ranking from 49 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.

Non-destructive Inspection Equipment Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.

  1. エヌ・ケイ・システム Yamaguchi//Testing, Analysis and Measurement
  2. 東芝ユニファイドテクノロジーズ 東京事業所　検査システム営業部 Tokyo//Testing, Analysis and Measurement
  3. 日本高圧電気 マグネグラフグループ Aichi//Other manufacturing
  4. 4 レックス Hyogo//Testing, Analysis and Measurement
  5. 5 Eddyfi Technologies ジャパンオフィス Osaka//Industrial Electrical Equipment
Go to Company Ranking

Non-destructive Inspection Equipment Product ranking

Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.

  1. Ultrasound scanning device エヌ・ケイ・システム
  2. [Catalog] X-ray Non-Destructive Testing System Comprehensive Catalog 東芝ユニファイドテクノロジーズ 東京事業所　検査システム営業部
  3. Spot Welding Non-Destructive Testing Device "Nugget Profiler" 日本高圧電気 マグネグラフグループ
  4. 4 [Information] Introduction to the Nugget Profiler 日本高圧電気 マグネグラフグループ
  5. 5 Microfocus X-ray Non-Destructive Testing Device 'TXView' 東芝ユニファイドテクノロジーズ 東京事業所　検査システム営業部

Non-destructive Inspection Equipment Product List

61～90 item / All 94 items

Displayed results
Not just purchasing! Introduction of case studies on "The Benefits of Utilizing MIX and Rentals"

Not just purchasing! Introduction of case studies on "The Benefits of Utilizing MIX and Rentals"

If you're looking to acquire a measuring device, relying solely on "purchase" is a waste! By utilizing rental and MIX examples, you can effectively cut down on time, costs, and management burdens.

If you have concerns regarding measuring instruments and measurements, this is a must-read. "I don't have the budget to purchase a measuring instrument since I rarely use it..." "I need to measure something immediately, but if I buy the equipment, the delivery won't make it in time." "The operational costs are high when I own it, and maintenance takes a lot of time, which is a hassle." "I'm looking for a substitute only for a certain period, such as during the calibration of our own equipment." "I want to try out the product before purchasing to see if its functions meet my needs." We introduce convenient alternatives to purchasing, such as "renting," and the "MIX utilization method" of combining purchase and rental, including case studies in the materials. [Content of the materials] ■ A review of the six benefits of MIX utilization and rental ■ [Case Studies] Customer feedback and recommended rental equipment ■ The process leading up to rental ■ Four pillars of service that only Rex, with 43 years of experience in measuring instrument rental, can provide! ■ Recommended Rex tools for those who want to ask, search, and know! *This document can be viewed immediately by clicking the download button below. Feel free to contact us with any inquiries.

  • Other measurement, recording and measuring instruments
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Major renewal of the rental catalog for measuring instruments and measuring devices for the manufacturing industry!

Major renewal of the rental catalog for measuring instruments and measuring devices for the manufacturing industry!

The published equipment for the manufacturing industry has been significantly renewed with about 300 items! This book is also packed with useful information.

The "Measurement Instrument Rental Catalog for Manufacturing Customers," which has been well-received for some time, has been renewed. The catalog we have prepared this time features approximately 300 items, significantly increasing from the previous edition. We have carefully selected measurement instruments that can be used in the manufacturing industry, making it easy to find the necessary equipment. Additionally, the catalog includes a "Popular Measurement Instruments Ranking by Industry," special feature pages on trending topics in the industry such as "Decarbonization" and "DX," as well as useful tips on measurement instruments that will provide you with valuable information beyond just the equipment. ★ The catalog is available in both a convenient "Electronic Catalog" for viewing on smartphones and tablets, and a physical "Catalog Booklet" that you can flip through. Please access the URL for the "Electronic Catalog" and the order form for the "Catalog Booklet" from the PDF download link below.

  • Other measurement, recording and measuring instruments
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Large area non-destructive testing equipment

Large area non-destructive testing equipment

Large area type suitable for use in aircraft and large structures.

- Detecting contamination by liquids, interlayer delamination, and damage due to impact - Automatically scanning the entire inspection area and measuring the size and position of defects using analysis tools - Automated inspection procedures eliminate the need for manual positioning and allow for repetitive inspections

  • Other inspection equipment and devices
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared Non-Destructive Testing Equipment for Turbine Blades

Infrared Non-Destructive Testing Equipment for Turbine Blades

It is a fully automated solution that can reduce the inspection time from several hours to just a few minutes compared to conventional inspection methods.

- Fully automated robotic standalone inspection station - Automatic recognition of defects in blocked cooling holes - Inspection ports and holes convenient for setting changes and operations - User-configurable hardware (flash lamp, infrared camera, etc.)

  • Other inspection equipment and devices
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared non-destructive testing equipment

Infrared non-destructive testing equipment

Portable type suitable for surface inspection of aircraft and stationary type suitable for parts inspection on the manufacturing line.

<Portable> - A simple, portable inspection device that integrates flash heating, image acquisition, and analysis functions into a single unit, making it easy for a single operator to use. - Quickly and clearly detects cracks and other defects. <Stationary> - Adaptable to various applications, from automatic manufacturing lines to aircraft inspections. - Conducts high-speed, non-contact inspections of flat and curved structures over a wide area, measuring material properties and the depth and area of subsurface defects.

  • Other inspection equipment and devices
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-destructive testing equipment

Non-destructive testing equipment

Non-destructive inspection of the interior of structures! We will drive vehicles equipped with sensors to collect inspection data.

Japan G.I.T. Co., Ltd. is a company specializing in the development, design, manufacturing, and sales of advanced technologies, including UWB. The "non-destructive testing equipment" we handle inspects the interiors of structures non-destructively. We collect inspection data by operating vehicles equipped with sensors. This streamlines the detection of defects inside structures that are not visible to the naked eye, contributing to the creation of a safe and secure environment. 【Features】 ■ Non-destructive inspection of the interiors of structures ■ Collection of inspection data by operating vehicles equipped with sensors ■ Streamlining the detection of defects inside structures that are not visible to the naked eye ■ Contributing to the creation of a safe and secure environment *For more details, please refer to the PDF materials or feel free to contact us.

  • Other inspection equipment and devices
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Application Example] Flat Panel Sensor (Example of USB 3.0 High-Speed Imaging)

[Application Example] Flat Panel Sensor (Example of USB 3.0 High-Speed Imaging)

High-speed transfer via USB 3.0 allows for smooth expression and storage of semi-video.

We would like to introduce a product that utilizes "Smart X-ray." The X-ray CCD flat panel sensor, which has a 16-bit density resolution and transmits images via USB 3.0, improves data transfer speed and allows for capturing and displaying more delicate images. Additionally, with a resolution of 750x500 pixels, it can save 3 frames of semi-video per second. [Overview] - Images that could not be distinguished with 14-bit resolution are displayed with 4 times the detail, providing more delicate images. - Smooth expression and storage of semi-video thanks to high-speed transfer via USB 3.0. *For more details, please refer to the PDF document or feel free to contact us.

  • X-ray inspection equipment
  • Other measurement, recording and measuring instruments
  • Other image-related equipment
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Application Example] X-ray CCD Flat Panel Sensor (Evaluation of Density Resolution)

[Application Example] X-ray CCD Flat Panel Sensor (Evaluation of Density Resolution)

Recognize and display samples with concentration differences that were difficult to distinguish at 14-bit resolution!

We would like to introduce a product that applies "Smart X-ray." The 'X-ray CCD Flat Panel Sensor' has a 16-bit density resolution for image transmission via USB 3.0, which improves data transfer speed and allows for capturing and displaying more delicate images. Additionally, with a resolution of 750x500 pixels, it can save 3 frames per second of quasi-video. 【Applications】 ■ Recognizes and displays samples with density differences that were difficult to distinguish with 14-bit resolution due to 16-bit processing. ■ Smooth expression and storage of quasi-video thanks to the high-speed transfer of USB 3.0. *For more details, please refer to the PDF document or feel free to contact us.

  • X-ray inspection equipment
  • Other measurement, recording and measuring instruments
  • Other image-related equipment
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Transmissive tabletop internal quality sensor 'QSCOPE-DT'

Transmissive tabletop internal quality sensor 'QSCOPE-DT'

Push the button after placing the fruit! Measure the internal quality of each fruit without damaging it.

The "QSCOPE-DT" is a tabletop internal quality sensor that can non-destructively measure the sugar content, acidity, ripeness, and internal defects of fruits. It allows for the measurement of each internal quality without damaging the fruit, and with the optional printer connection, it is possible to print the measurement results. The target fruits include pears, apples, peaches, plums, mangoes, tomatoes, and persimmons. Simply place the fruit on the sensor and push a button. 【Features】 ■ Non-destructive measurement of fruit sugar content, acidity, ripeness, and internal defects ■ Measure each internal quality without damaging the fruit ■ Print measurement results with an optional printer connection ■ Just place the fruit and push the button *For more details, please refer to the PDF document or feel free to contact us.

  • Other physicochemical equipment
  • Other inspection equipment and devices
  • X-ray inspection equipment
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
No need for gel application or water immersion! Non-contact, non-destructive testing device using airborne ultrasonic method.

No need for gel application or water immersion! Non-contact, non-destructive testing device using airborne ultrasonic method.

Non-destructive and non-contact inspection of the welding, fusion, adhesion, and peeling states of metals, resins, plastics, rubber, CFRP, and dissimilar joints is possible!

Conventional ultrasonic testing required the probe to be in contact with some medium, such as gel or water. This device adopts the air-coupled ultrasonic method, allowing measurements to be taken non-contact in the air. 【Features】 ○ Internal inspection possible without contact and non-destructive ○ By moving a single-axis robot, measurements can be taken over a range of 150x100mm ○ Measurement results are displayed as a color contour map of transmission intensity distribution, making defects immediately apparent. ◎ Free evaluation tests are available. Please contact us for more details.

  • Defect Inspection Equipment
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Crack Diagnosis Non-Destructive Testing Machine <Handheld Type>

Crack Diagnosis Non-Destructive Testing Machine <Handheld Type>

Collected data is stored in the cloud server! Inspection equipment for tunnels, bridges, highways, and structures.

The "Crack Diagnosis Non-Destructive Testing Device" is a handheld inspection device used by maintenance personnel to regularly conduct non-destructive testing in tunnels, highways, bridges, and any location in buildings. It diagnoses cracks, delaminations, voids, fissures, and cracks using piezoelectric element sensors. The tapping rod is equipped with a piezoelectric element sensor that captures the vibrations transmitted from the tapping rod. To prevent data loss due to operational errors, voltage data is automatically stored in a cloud server via an LTE wireless connection. 【Features】 ■ Data is also stored on a microSD card as a backup ■ Voltage values tapped with the rod are digitally displayed if they exceed a threshold ■ It is possible to collect data over several days ■ High performance ■ Records can be kept through image processing *For more details, please refer to the PDF materials or feel free to contact us.

  • Defect Inspection Equipment
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-destructive testing machine "Anchor Checker"

Non-destructive testing machine "Anchor Checker"

Inspection is possible just by placing the probe on the designated part of the anchor! A non-destructive testing device that can inspect and determine the bonding condition of post-installed anchors.

The (HAWK) Anchor Checker is a non-destructive testing device that can inspect and determine the bonding condition of post-installed anchors. It allows for inspection simply by placing the probe on the designated part of the anchor, making it possible to conduct tests in a shorter time compared to tensile tests. Additionally, while sound testing can yield varying results due to surrounding noise or the skill of the tester, the Anchor Checker sets thresholds based on the measurement values of anchors in good installation condition, ensuring consistent evaluations. (Note: This does not guarantee the pull-out resistance of post-installed anchors.) 【Features】 ■ Lightweight and Compact: It is lightweight and compact, allowing for space-saving inspections. ■ Non-destructive: Since inspection is performed simply by placing the probe, it does not affect the anchor or the structure. ■ Easy Inspection: It does not require complex operations, enabling quick inspection and determination. ■ Fair Evaluation: It automatically performs quantitative assessments based on pre-set thresholds. *For more details, please download the PDF or contact us.

  • Other inspection equipment and devices
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
New! 【Non-destructive testing equipment】 SenrigaN

New! 【Non-destructive testing equipment】 SenrigaN

The non-destructive testing device SenrigaN is equipment used to investigate the deterioration, corrosion, thinning, and fracture of PC steel wires (PC steel bars, round steel bars), sheath pipes, and other materials.

Non-destructive testing device SenrigaN that protects the safety and security of bridges and floor slabs on roads and railways SenrigaN, developed, manufactured, and sold by a Japanese manufacturer, plays an important role in the strength of Japan's infrastructure facilities. It can investigate the deterioration, corrosion, reduction in thickness, and breakage of PC steel wires (PC steel bars, round steel bars), sheath pipes, etc. As this device has not yet been officially released or sold, the manufacturer's name and other details are withheld. For inquiries, please contact: Radar Technology Research Institute Co., Ltd. TEL: 042-203-5522 e-mail: info@rgk.jp President: Kenji Goto

  • Defect Inspection Equipment
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Security Portable X-ray Device FLATSCAN30

Security Portable X-ray Device FLATSCAN30

Portable X-ray device specialized for security applications with a 76cm (diagonal) image area.

A portable X-ray device for security that combines a flat panel "FLATSCAN30" with a detection surface size of 61.4 x 46 cm (diagonal 76 cm) and a generator with a maximum tube voltage of 120kV (CP120B) / 160kV (CP160B). It can transmit imaging data to a PC via Wi-Fi or Bluetooth, allowing real-time verification of the contents of the object.

  • X-ray inspection equipment
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Security Portable X-ray Device FLATSCAN15/30 XS

Security Portable X-ray Device FLATSCAN15/30 XS

Contributing to crisis management with a slim and ultra-lightweight portable X-ray device!

Teledyne ICM, an expert in portable X-ray technology, has launched the new slim and ultra-lightweight portable X-ray device 'FLATCAN XS' in the market. In the evolving portable X-ray device market, it contributes to crisis management by leveraging its mobility in environments where security is essential, such as EOD, customs, airports, stadiums, public places, and law enforcement agencies. It offers two models with an active zone of 76cm/38cm (diagonal). Weighing 3.5kg / 5.7kg, it is ultra-lightweight and capable of inspecting large objects. Imaging can be done in a single scan without moving, preventing operator exposure. Images can be obtained in five seconds. The dual energy feature distinguishes between organic and inorganic materials, enabling drug detection as well. Manufacturer: TELEDYNE ICM (Belgium)

  • X-ray inspection equipment
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Comprehensive Catalog "Measuring Instruments (Rental Products)"

Comprehensive Catalog "Measuring Instruments (Rental Products)"

Only the necessary time when needed! Introducing rental products to ensure safety and security on site.

This catalog is a comprehensive catalog featuring products handled by Ascom Co., Ltd., which rents measuring instruments and measurement devices. We offer a wide range of products, including noise measuring instruments, vibration measuring instruments, concrete structure diagnostic machines, and surveying equipment. Please feel free to consult us if you have any requests. [Contents] ■ Noise measuring instruments and vibration measuring instruments ■ Atmospheric environment measuring instruments ■ Safety and health ■ Water quality measuring instruments ■ Meteorological observation instruments, etc. *For more details, please download the PDF or feel free to contact us.

  • Rental/lease
  • Other measurement, recording and measuring instruments
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Diagnosing Infrastructure Aging! Non-destructive Testing Technology Using Microwave Radar

Diagnosing Infrastructure Aging! Non-destructive Testing Technology Using Microwave Radar

Measurement technology for the safety and security of society! It is a non-destructive testing technology for concrete structures such as social infrastructure, which are being viewed as problematic due to aging.

We have achieved the advancement of non-destructive internal inspection of concrete structures using microwave radar. The aging of social infrastructure is becoming a serious social issue, with many problems related to the safety and security of concrete structures, such as the health diagnosis of tunnels and bridges, seismic performance evaluation of concrete buildings, and deterioration inspection of rebar and piping within concrete. While construction technology for concrete structures has made remarkable progress, effective diagnostic techniques for their maintenance have not yet been found. This technology achieves high precision in radar imaging (position and shape estimation) and improved estimation performance of embedded material properties (such as material type and degree of deterioration) through the advancement of microwave propagation time estimation and the refinement of microwave propagation and reflection models.

  • X-ray inspection equipment
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Pipe scanner "MEC-SCAN(TM)"

Pipe scanner "MEC-SCAN(TM)"

With a high inspection speed of approximately 20m/min, defects in piping can be detected with high precision!

The "MEC-SCAN(TM)" is a pipe scanner based on magnetic saturation eddy current testing technology, capable of detecting corrosion on both the coated and uncoated surfaces of tank bottom plates as well as their reverse sides. The power supply system includes "P9" for the device's pericase, "P13" for data collection via TCP and RS422, and "P19," which allows for six different lift-off settings on the same wheel holder. 【Features】 ■ High-precision detection of pipe defects ■ High inspection speed of approximately 20m/min ■ Average accuracy of +/- 10% ■ Capable of inspecting carbon steel, stainless steel, duplex steel, and super duplex steel ■ Detection of pitting, cracking, and various types of corrosion, etc. *For more details, please download the PDF or feel free to contact us.

  • Defect Inspection Equipment
  • Other inspection equipment and devices
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SONOPEC

SONOPEC

CUI (Corrosion Under Insulation) inspection solution that can measure the thinning of the target object without removing insulation materials, fireproof coverings, or coatings: SONOPEC.

SONOPEC is a non-intrusive electromagnetic technology based on the latest PEC (Pulsed Eddy Current Testing) that enables the detection, measurement, and monitoring of corrosion in low carbon steel piping and pressure vessels without removing insulation materials, paint, coatings, concrete fireproofing, or marine products such as oysters. This is a CUI (Corrosion Under Insulation) inspection solution. • Inspections can be conducted while the equipment is in operation, resulting in no production loss. • There is no need to remove insulation materials covering the objects, leading to reduced inspection costs. • Quick inspections are possible as surface treatment is not required. • PEC provides extremely high reproducibility in measurements taken at the same location. • Inspection costs underwater are significantly reduced. • When the material of the object is uniform, the accuracy of corrosion detection under insulation is ±5%. • The accuracy of corrosion monitoring is ±0.2%. • The temperature range for inspections is from -100°C to 550°C. • The thickness of the inspection target objects ranges from 2 mm to 70 mm. • The maximum thickness of insulation materials is 200 mm. • For piping, the minimum outer diameter is from 50 mm.

  • Flaw detection testing
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DTI-Difficult to Inspect Pipelin

DTI-Difficult to Inspect Pipelin

Effective inspection solutions for complex-shaped pipelines such as U-bends and multi-bends.

The RTD DTI Trekscan is a groundbreaking device designed to move back and forth inside pipelines at a speed of 1m/s (3.3ft/s) with a 1D, 90-degree bend. With cutting-edge ultrasonic testing technology and proprietary analysis software, it guarantees the best possible inspection results. The device can be used in most refined petroleum products, crude oil, and water. The measurable thickness of the pipeline ranges from 1.5mm (0.06inch) to a maximum of 60.0mm (2.3inch). The RTD DTI Trekscan is certified by TUV.

  • Inspection robot
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
No preprocessing required! Easy! Pulse eddy current non-destructive testing device [Application examples available].

No preprocessing required! Easy! Pulse eddy current non-destructive testing device [Application examples available].

Can be used without qualifications. It can perform inspections non-contact, allowing for rapid detection of defects with minimal surface treatment! Portable and easy-to-use non-destructive testing device.

Finally, an inspection device capable of detecting defects in back-side and laminated structures has been completed. "Inspecting internal and back-side cracks takes a lot of time and cost." "It's difficult to inspect cracks and defects without outsourcing to a contractor." Do you have similar concerns? Our product can detect defects on the surface, inside, and back-side of non-magnetic stainless steel, as well as defects in the lower plates of laminated structures. According to performance tests, defects in non-magnetic stainless steel with a thickness of 10mm and back cracks deeper than 3mm can be easily detected. Moreover, in cases with uneven surfaces like welds, it is possible to scan by lifting the sensor by about 1 to 3mm, so there is little need for surface treatment (bead polishing, painting, dirt removal). Additionally, for large cracks, detection is possible even when lifted more than 10mm from the surface, and inspections for material changes such as hardening are also feasible. *For more details, please refer to the PDF document or feel free to contact us.

  • Other inspection equipment and devices
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Large Diameter Pipe External Corrosion Measurement System 'P-Master'

Large Diameter Pipe External Corrosion Measurement System 'P-Master'

Inspect the corrosion condition of the outer surface of the pipe from the inner surface of the large-diameter pipe without the need for scaffolding.

The "P-Master" is a device designed for the investigation and measurement of external corrosion occurring on large-diameter pipes. It performs thickness measurements while traveling circumferentially along the inner surface of the pipe using ultrasonic testing methods. The measurement results are processed using dedicated data processing software to create a reduction value and distribution map due to external corrosion. Additionally, by employing a log amplifier, the influence of surface roughness and the unevenness of the thinned areas is reduced, making it easier to detect small pitting. 【Features】 ■ Continuous measurement allows for an understanding of the external corrosion condition of the entire piping system. ■ Measurement can be conducted without excavation of the ground or concrete removal work. ■ The use of a magnetically adhered scanning mechanism enables measurement without the need for scaffolding. ■ Full waveform data recording facilitates easy differentiation between base material defects and thinning. ■ Provision of summary tables of measurement results, corrosion condition distribution maps, and cross-sectional views, among others. *For more details, please download the PDF or contact us.

  • Other inspection equipment and devices
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Pulley ultrasonic testing device

Pulley ultrasonic testing device

The inspection pitch can be set arbitrarily from 0.1 to 2.0 mm! The NG shooter is installed on the right side of the device.

The "Pulley Ultrasonic Testing Device" is a machine that automatically detects defects in the pulley friction welding area. It automatically inspects the workpiece set by the operator and determines whether it is OK or NG. A heater and a concentration meter for concentration management are installed in the water tank. Additionally, the operator is responsible for loading the workpiece, starting the inspection, and discharging it, while the inspection is carried out automatically according to a pre-set program. 【Inspection Specifications】 ■ Detects welding defects of φ1.2mm or larger ■ Inspects the entire welding surface by rotating the workpiece and moving the ultrasonic probe mechanism *For more details, please refer to the PDF document or feel free to contact us.

  • 4サブ1.jpg
  • 4サブ2.jpg
  • Defect Inspection Equipment
  • Other inspection equipment and devices
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thrust plate measurement device

Thrust plate measurement device

Equipped with two operation modes (manual/automatic) and three driving modes (individual/local/remote)!

The "Thrust Plate Measurement Device" is a device that measures the thickness of a thrust plate using a laser. When the operator sets the workpiece in the fixture and presses the measurement start button, a pair of laser sensors set above and below measures the thickness of the workpiece. The workpiece rises and rotates through an ascending mechanism and a rotating mechanism, measuring the thickness at a total of three points, and after the inspection is complete, the measurement results are displayed on the monitor (average value of the three measurements). 【Main Device Specifications (Partial)】 ■ Equipment Size: Width 500 × Height 1979 × Depth 430 mm (Weight: 0.2t) ■ Workpiece Measurement Accuracy: ±1.0μm ■ Power Supply: AC200V 3-phase (Power: 2.5kVA) *For more details, please refer to the PDF document or feel free to contact us.

  • 8サブ1.jpg
  • 8サブ2.jpg
  • 8サブ3.jpg
  • 8サブ4.jpg
  • Other measurement, recording and measuring instruments
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Automatic Piston Ultrasonic Testing Device

Automatic Piston Ultrasonic Testing Device

By rotating the piston, it is possible to inspect the measurement points all around!

The "Piston Ultrasonic Inspection Device <Automatic>" is an automatic device that grips the finished pistons transported from the previous process at the rear of the conveyor, installs them on the inspection table, and automatically inspects them before discharging them to the next process. The device is designed to change fixtures according to the type of piston being inspected and checks for the presence or absence of wear ring peeling. The conveying mechanism is driven by servo motors on the X-axis and Z-axis (left-right, up-down), and the Y-axis (front-back), while the workpiece chuck is air-driven. 【Device Specifications (Partial)】 ■ Equipment Size (Mechanism): Width 2000 × Height 2330 × Depth 1300 mm (including the conveyor gantry) ■ Test Materials - Finished pistons (with wear rings cast in) - Expected: φ70–100 mm - Material: Cast aluminum *For more details, please refer to the PDF document or feel free to contact us.

  • 11サブ1.jpg
  • 11サブ2.jpg
  • 11サブ3.jpg
  • Flaw detection testing
  • Defect Inspection Equipment
  • Other inspection equipment and devices
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrastructure Data Mapping Device

Infrastructure Data Mapping Device

Visual data through mapping. ~Accurately and objectively sharing degradation information~

This product automatically identifies the coordinate position by aiming at the target location and inputting it. The obtained data is visualized in a map, allowing for accurate and objective sharing of deterioration information. *For more details, please refer to the PDF document or feel free to contact us.*

  • 画像６.jpg
  • 画像7.png
  • Testing Equipment and Devices
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Equipment Introduction] Inspection Machine

[Equipment Introduction] Inspection Machine

We have equipment to measure dimensions, angles, surface shapes, 3D shapes, and more of the measurement targets!

We would like to introduce the "inspection equipment" that we have. We possess an "X-ray inspection machine" that can check the condition of air pockets in die-cast parts, as well as a "three-dimensional measuring machine" that measures dimensions, angles, surface shapes, and 3D shapes by pressing a probe, known as a contact sensor, against the object. Additionally, we have a "melt issuing analysis device" that can analyze materials rescued from the furnace, not just the mill sheets from material manufacturers, to confirm whether they meet specifications. 【Equipment Owned】 ■ X-ray inspection machine ■ Three-dimensional measuring machine ■ Melt issuing analysis device *For more details, please feel free to contact us.

  • X-ray inspection equipment
  • 3D measuring device
  • Analytical Equipment and Devices
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Inline Non-Destructive Testing System "Phased Array Ultrasonic Flaw Detector"

Inline Non-Destructive Testing System "Phased Array Ultrasonic Flaw Detector"

Achieving more accurate and rapid inspections! A 64-channel portable phased array ultrasonic testing device that integrates many capabilities.

The inline non-destructive testing system "TOPAZ64" is a 64-channel portable phased array ultrasonic testing device manufactured by ZETEC, equipped with TFM functionality. It achieves more accurate and faster inspections with the required capabilities integrated into a single unit! It supports inspections compliant with the 64/128PR phased array ultrasonic testing method, as well as high-resolution full matrix capture (FMC). Even when inspecting complex composite materials or thick steel welds, it provides superior coverage. 【Features】 ■ Equipped with UltraVision Touch software ■ Addresses various inspection needs and challenges ■ Powerful channel configuration ■ High resolution, higher performance ■ Improves defect detection probability *For more details, please refer to the PDF document or feel free to contact us.

  • Flaw detection testing
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
What is non-destructive testing? Information about the targets, types, and manufacturers of the equipment used.

What is non-destructive testing? Information about the targets, types, and manufacturers of the equipment used.

Non-destructive inspection technology! Introduction of main types of inspections such as visual inspection and penetrant testing.

In the manufacturing industry, creating and maintaining durable products that can be used for a long time while ensuring safety is essential for quality management. The key process in this is inspection. One of the inspection techniques is non-destructive testing. This may be a term that is not very familiar to you. Therefore, this article will explain what non-destructive testing is. *You can view the detailed content of the article through the link below.*

  • Internal Control and Operational Management
  • Non-destructive Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Non-destructive Inspection Equipment

Related Categories of Non-destructive Inspection Equipment

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.