We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Runner.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Runner - List of Manufacturers, Suppliers, Companies and Products

Runner Product List

1～3 item / All 3 items

Displayed results
Mini Runner Case Study (2)

Mini Runner Case Study (2)

Modified the submarine gate mold! The large runner has been reduced in size, significantly improving workability.

Here is a case study on the introduction of mini runners. We modified the submarine gate mold, significantly reducing the runner weight. The large runners have been made smaller, greatly improving workability. We successfully reduced the runner volume by approximately 74.7%. Additionally, we were able to reduce the runner weight by about 23.11 grams. 【Case Overview】 <Before Mini Runner Introduction> ■ Runner Volume: 317,377.79 mm³ ■ Runner Weight: 30.93 grams <After Mini Runner Introduction> ■ Runner Volume: 549.23 x 8 = 4,393.84 mm³ ■ Runner Weight: 7.82 grams *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mini Runner Introduction Case Study (1)

Mini Runner Introduction Case Study (1)

Significantly reduce runner weight! Improved fluidity allows for thinner and smaller runners.

Here is a case study of the introduction of mini runners. We modified the pin gate mold and significantly reduced the runner weight. The fluidity improved, allowing us to make the runners thinner and smaller. We successfully reduced the runner volume by approximately 71.6%. Additionally, we were able to reduce the runner weight by about 10.29 grams. 【Case Overview】 <Before Introducing Mini Runners> ■ Runner Volume: 2831.11 x 4 = 11324.44mm³ ■ Runner Weight: 14.38 grams <After Introducing Mini Runners> ■ Runner Volume: 804.2835 x 4 = 3217.13mm³ ■ Runner Weight: 4.09 grams *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mini Runner Case Study (3)

Mini Runner Case Study (3)

Runner weight reduction rate of 68%! Achieving an H-type 8-point nozzle with a narrow nozzle pitch.

We would like to introduce a case study of the mini runner implementation. We modified the submarine gate mold to significantly reduce the runner weight. The H-type 8-point nozzle is achieved with a narrow nozzle pitch. We successfully reduced the runner weight by approximately 5.3g, achieving a reduction rate of 68%. Additionally, the cycle time was reduced by about 10-15%. 【Case Overview】 <Before Mini Runner Implementation> ■ Runner Weight: 7.8g ■ Cycle Time: 20 seconds <After Mini Runner Implementation> ■ Runner Weight: 2.5g ■ Cycle Time: Approximately 17 seconds *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.