Last Updated： Aggregation Period:Nov 12, 2025～Dec 09, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 12, 2025～Dec 09, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 12, 2025～Dec 09, 2025
This ranking is based on the number of page views on our site.
256～270 item / All 300 items
High torque across a wide speed range, improved noise resistance with simple wiring. Easy to set up with a rich variety of interfaces.
The FAULHABER motion controller integrated brushless DC servo motor MCS 3268…BX4 ET has a size of 50 mm in outer diameter and a 101 mm output shaft diameter. It can be set within a speed range of 1 ... 6000 (rpm) and can operate with a maximum torque of 190 (mNm).
Excellent thrust-to-volume ratio. No residual thrust. Moreover, both acceleration and repeat position accuracy are at a high level.
The FAULHABER linear DC servo motor, LM 1483…12, is equipped with a gear head that has an output shaft diameter of 2 mm and a maximum thrust of 18.4 N, with a stroke of 20 … 80 mm, reproducibility of 80 μm, accuracy of 260 μm, and a maximum speed of 3.4 m/s.
Top brand of DC micro motor drive systems in Germany and Switzerland: Faulhaber. Delivering cutting-edge technology worldwide.
The FAULHABER motion controller integrated brushless DC servo motor 2232…BX4 IMC RS/CO has a total length of 49.6 mm and an output shaft diameter of 22 mm. It can be set within a speed range of 1 ... 13000 (rpm) and can operate with a maximum torque of 36 (mNm).
200W~390W Industry's lightest and smallest battery-operated AC servo motor
The current consumption is exceptionally low, contributing significantly to an improvement in battery operating time. This motor, unique to brushless DC motors, maintains its long lifespan while minimizing current consumption to the extreme, and it also contributes to further miniaturization and weight reduction. Specifications: Size: □80 L145 Weight: 2.6Kg Rated Output: 200W~390W Rated Torque: 0.90Nm Rated Speed: 2,000~3,700rpm Rated Voltage: 24V~48V Rated Current: 9.8A Encoder: Incremental 2,500PPR (Made in Japan) For more details, please contact us or download the catalog.
![Stepping servo motor [encoder-equipped stepping motor]](https://image.mono.ipros.com/public/product/image/7bd/2000317703/IPROS02884875517854633153.jpeg?w=280&h=280)
It is a stepping servo motor equipped with an encoder for a 2-phase stepping motor. This stepping servo motor was developed specifically for FA (Factory Automation) equipment.
The stepping motors so far have struggled with issues such as loss of step, heat generation, vibration, and high-precision positioning. These problems can be resolved by combining them with dedicated encoders. We offer stepping motors (stepping servo motors), which are expected to see increasing demand in future FA equipment, at a lower price than anywhere else. Equipped with a loss of step alarm - By combining with our motors, we have implemented a loss of step detection system on the driver. Loss of step avoidance through closed-loop control - In cases of sudden acceleration or temporary overload, the motor's rotation may lag behind the input pulses, but the MSD0487P can follow through closed-loop control. - Loss of step detection mode and closed-loop mode can be switched with a switch - Loss of step avoidance function through closed-loop control (closed-loop mode) - Wide range of resolution settings (400~25600) - Abundant protection features (overcurrent, poor connection, overvoltage, undervoltage, overload) - Input power: DC24V to DC75V - Auto current down function
280W Industry's lightest and smallest battery-powered AC servo motor with brake.
The current consumption is exceptionally low, contributing to a significant improvement in battery operating time. This motor, characteristic of brushless DC motors, maintains its long lifespan while minimizing current consumption to the extreme, and it also contributes to further miniaturization and weight reduction. Specifications: Size: □80 L139 Weight: 2.2 kg Rated output: 280 W Rated torque: 0.62 Nm Rated speed: 4,260 rpm Rated voltage: 48 V Rated current: 8.0 Arms Encoder: Incremental 2,500 PPR (made in Japan) For more details, please contact us or download the catalog.
400W Industry's lightest and smallest battery-powered AC servo motor with brake.
The current consumption is exceptionally low, contributing to a significant improvement in battery life. This motor, unique to brushless DC motors, maintains its long lifespan while minimizing current consumption to the extreme, and also contributes to further miniaturization and weight reduction. Specifications: Size: □80 L139 Weight: 1.6Kg Rated Output: 400W Rated Torque: 0.65Nm Rated Speed: 6,100rpm Rated Voltage: 24V Rated Current: 15A Encoder: Incremental 2,500PPR (Made in Japan) For more details, please contact us or download the catalog.
It achieves low cost and short delivery times for large battery-powered robots with standard type high-output (525W to 2400W) cored AC servo motors.
The Coreed AC servo motor here is a standard type equipped with an incremental encoder. It is a battery-operated Coreed AC servo motor that inherits conventional technology. Since it is typically in stock, it is a battery-operated AC servo motor that offers excellent pricing and delivery times. If you are looking to reduce costs and shorten delivery times, please feel free to request a quote. What is a battery-operated AC servo motor: It is a brushless motor compatible with battery operation (DC 24V to 48V) that is equipped with an encoder, allowing for torque control, position control, and speed control. The motor is designed with a low torque constant and a high back EMF constant. Specifically, it can be easily designed using thick conductors, but this results in a lower space utilization ratio. Consequently, compared to designs compatible with high voltage (single-phase and three-phase AC 110Vac-220Vac, etc.), the motor efficiency decreases and the size increases. There are various types of encoders, including magnetic and optical types, as well as incremental and absolute types. When selecting, please check their performance and confirm whether the drive driver is compatible with that encoder type.
Servo motor equipped with a non-contact magnetic encoder.
The PMX series is a high-performance, high-precision servo lineup designed and developed by Kondo Science. Inside the servo case, a control board that integrates a special aluminum gear, stainless steel gear, motor, angle sensor, and motor driver is included. This allows for easy use of various functions by simply connecting one cable and supplying power and commands tailored to specifications to the servo. It features control methods not only for position control based on angles but also for speed and current (torque) based on command instructions via packet communication. Additionally, it can provide diverse feedback such as current angle, temperature, and current values. The compact product configuration is praised for its ease of integration and the convenience of servo replacement. Furthermore, the use of high-output motors allows for high torque while minimizing the required mounting space.
Non-contact magnetic encoder equipped servo motor
The PMX series is a high-performance, high-precision servo lineup designed and developed by Kondo Science. Inside the servo case, a control board that integrates a special aluminum gear, stainless steel gear, motor, angle sensor, and motor driver is included. This allows for easy use of various functions by simply connecting one cable and supplying power and commands tailored to specifications to the servo. In addition to position control based on angles, it is equipped with control methods using command instructions via packet communication for speed and current (torque) data. It also provides diverse feedback such as current angle, temperature, and current values. The compact product configuration is praised for its ease of integration and the convenience of servo replacement. Additionally, the use of high-output motors enables high torque while minimizing the required installation space.
Spindle servo motor that maintains inherent rotational accuracy and electrical characteristics even when rotating at ultra-high speeds.
Introducing the spindle servo motor "SP3 Motor." Thanks to its dedicated structural design, it can maintain its inherent rotational accuracy and electrical characteristics even when rotating at ultra-high speeds. The noise level is 80dB(A), the operating temperature ranges from -15℃ to 40℃, and the manufacturer is FUKUTA. 【Specifications】 ■ Output: 3.7KW ■ Maximum rotational speed: 9000rpm ■ Voltage: 190V ■ Waterproof rating: IP55 ■ Noise: 80dB(A) ■ Operating temperature: -15℃ to 40℃ *For more details, please refer to the related link page or feel free to contact us.
Low-speed operation possible! Compact type position control motor with built-in driver and encoder.
The "SL60-P Series" is a compact type of simple servo motor designed for position control. Despite its size of Φ 60.5×L76mm, it is an all-in-one type that incorporates driver and encoder functions. Its compact design allows for more flexibility in planning, and its reduced wiring makes integration easy. Additionally, it is possible to program the built-in functions according to user specifications. 【Features】 ■ Capable of position control (pulse input) ■ Built-in driver and encoder functions ■ Capable of low-speed operation ■ Fewer components lead to lower costs ■ Custom programming according to user specifications is also possible *For more details, please refer to the PDF document or feel free to contact us.
A compact type position control servo motor with a built-in encoder function.
The "SL16-P Series" is a small type of AC servo motor that performs position control. Despite its size of φ16×L48 mm, it incorporates a simple resolver. Additionally, it allows for operation conditions and pattern settings via serial communication. 【Features】 ■ Capable of position control (pulse input) ■ Built-in encoder function ■ Built-in simple resolver ■ Ultra-compact AC servo driver (size of AA battery) ■ Operation conditions and pattern settings available via serial communication *For more details, please download the PDF or feel free to contact us.
Low-speed operation possible! A compact speed control motor with built-in driver and encoder functions.
The "SL42-S Series" is a compact type of simple servo motor that performs speed control. Despite its size of Φ42.7×L57mm, it is an all-in-one type with built-in driver and encoder functions. Its compact design allows for more flexibility in design, and the reduced wiring makes it easy to integrate. Additionally, it is possible to program the built-in specifications according to user requirements. 【Features】 ■ Capable of speed control (speed command voltage input) ■ Built-in driver and encoder functions ■ Capable of low-speed operation ■ Fewer components for a lower price ■ Possible to program built-in specifications according to user requirements *For more details, please refer to the PDF materials or feel free to contact us.
