Last Updated： Aggregation Period:Sep 30, 2026～Oct 27, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 30, 2026～Oct 27, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 30, 2026～Oct 27, 2026
This ranking is based on the number of page views on our site.
181～210 item / All 313 items
A long-life brushless rectifier motor with a high volume-to-output ratio. It uses a two-pole magnet and can perform servo control even in harsh environments.
The FAULHABER brushless DC servo motor with 2-pole technology, model 1660…BHS, has an outer diameter of 16 mm and a total length of 60 mm. It can be set within a speed range of 97,000 rpm and can operate with a maximum torque of 364 mNm.
A motor with a long lifespan brushless rectifier and high volume-to-output ratio. It uses a 4-pole magnet and can achieve servo control even in harsh environments.
The FAULHABER brushless DC servo motor with 4-pole technology 2232…BX4 SC has a size of 22 mm in outer diameter and a shaft diameter of 49.6 mm, capable of operating within a speed range (maximum 24V/28V) of 400…14000, with a maximum torque of 35 (mNm).
A motor with a long lifespan brushless rectifier and a high volume-to-output ratio. It uses a 4-pole magnet, enabling servo control even in harsh environments.
The FAULHABER brushless DC servo motor with 4-pole technology, model 3242…BX4 SCDC, has a size of 32 mm in outer diameter and a shaft diameter of 59.4 mm. It can operate within a speed range of 400 to 11200 (maximum 24V/30V) and has a maximum torque of 90 mNm.
A motor with a long lifespan brushless rectifier and high volume-to-output ratio. It uses a 4-pole magnet, enabling servo control even in harsh environments.
The FAULHABER brushless DC servo motor with 4-pole technology 3268…BX4 SCDC has a size of 32 mm in outer diameter and an output shaft diameter of 85.4 mm, capable of operating within a speed range (maximum 30V) of 400…7000, with a maximum torque of 120 (mNm).
High torque across a wide speed range, improved noise resistance with simple wiring. Easy to configure with a rich variety of interfaces.
The FAULHABER motion controller integrated brushless DC servo motor 2232…BX4 CxD has a size of 22 mm in outer diameter and a shaft diameter of 49.6 mm. It can be set within a speed range of 5 ... 8000 (rpm) and can operate with a maximum torque of 57 (mNm).
High torque across a wide speed range, improved noise resistance with simple wiring. Easy to set up with a rich variety of interfaces.
The FAULHABER motion controller integrated brushless DC servo motor 2250…BX4 CxD has a size of 22 mm in outer diameter and an output shaft diameter of 67.6 mm. It can be set within a speed range of 1 ... 7000 (rpm) and can operate with a maximum torque of 50 (mNm).
High torque across a wide speed range, improved noise resistance with simple wiring. Easy to set up with a rich variety of interfaces.
The FAULHABER motion controller integrated brushless DC servo motor 3242…BX4 Cx has a size of 32 mm in outer diameter and an output shaft diameter of 63.8 mm. It can be set within a speed range of 1 ... 6500 (rpm) and can operate with a maximum torque of 134 (mNm).
High torque across a wide speed range, improved noise resistance with simple wiring. Easy to set up with a rich variety of interfaces.
The FAULHABER motion controller integrated brushless DC servo motor MCS 3274…BP4 ET has a size of 50 mm in outer diameter and a shaft diameter of 110 mm. It can be set within a speed range of 1 ... 11600 (rpm) and can operate with a maximum torque of 320 (mNm).
Excellent thrust-to-volume ratio. No residual thrust. Moreover, both acceleration and repeat position accuracy are at a high level.
The FAULHABER linear DC servo motor, LM 0830 … 01, features a gear head with an output shaft diameter of 0.03 mm and a maximum thrust of 2.74 N, with a stroke range of 15 ... 40 mm, reproducibility of 40 μm, accuracy of 120 μm, and a maximum speed of 2.4 m/s.
Excellent thrust relative to volume ratio. No residual thrust. Moreover, both acceleration and repeat position accuracy are at a high level.
The FAULHABER linear DC servo motor, LM 1483…11, is equipped with a gear head that has an output shaft diameter of 2 mm and a maximum thrust of 18.4 N, with a stroke of 20 ... 80 mm, reproducibility of 40 μm, accuracy of 180 μm, and can operate at a maximum speed of 3.4 m/s.
A flat-type servo motor with a long-lasting brushless rectifier and a high volume-to-output ratio. Combined with a gear head to achieve the desired output.
The FULHABER brushless flat DC servo motor 2214…BXT R has a diameter of 22 mm and a total length of 14 mm, and it can be set within a speed range of 10,000 (rpm), capable of driving with a maximum torque of 29.6 (mNm).
A flat-type servo motor with a long-lasting brushless rectifier and a high volume-to-output ratio. Combined with a gear head to achieve the desired output.
The FULHABER brushless flat DC servo motor 2214…BXT H has an outer diameter of 22 mm and a total length of 14 mm, and it can be set within a speed range of 10,000 (rpm), capable of driving with a maximum torque of 29.6 (mNm).
A flat-type servo motor with a long lifespan brushless rectifier, featuring a high volume-to-output ratio. Combined with a gear head to achieve the desired output.
The FULHABER brushless flat DC servo motor 3216…BXT R has a diameter of 32 mm and a total length of 16 mm, and it can be set within a speed range of 10,000 (rpm), capable of driving with a maximum torque of 263 (mNm).
A flat-type servo motor with a long lifespan brushless rectifier and high volume-to-output ratio. Achieves the desired output when combined with a gear head.
The FULHABER brushless flat DC servo motor 3216…BXT H has an outer diameter of 32 mm and a total length of 16 mm. It can be set within a speed range of 10,000 (rpm) and can operate with a maximum torque of 263 (mNm).
A flat-type servo motor with a long-lasting brushless rectifier and a high volume-to-output ratio. Combined with a gear head to achieve the desired output.
The FULHABER brushless flat DC servo motor 4221…BXT R has a diameter of 42 mm and a total length of 21 mm. It can be set within a speed range of 10,000 rpm and can operate with a maximum torque of 1390 mNm.
A flat-type servo motor with a long-lasting brushless rectifier and a high volume-to-output ratio. Combined with a gear head to achieve the desired output.
The FULHABER brushless flat DC servo motor 4221…BXT H has an outer diameter of 42 mm and a total length of 21 mm. It can be set within a speed range of 10,000 (rpm) and can operate with a maximum torque of 1390 (mNm).
A long-life brushless rectifier motor with a high volume-to-output ratio. It uses a two-pole magnet, enabling servo control even in harsh environments.
The FAULHABER brushless DC servo motor with 2-pole technology 1645…BHS has an outer diameter of 16 mm and a total length of 45 mm. It can be set within a speed range of 100,000 (rpm) and can be driven with a maximum torque of 138 (mNm).
A long-lasting brushless rectifier with a high volume-to-output ratio flat motor. It is equipped with a Hall sensor for servo control.
The FAULHABER brushless DC servo motor with integrated speed controller 2214…BXT H SC has a diameter of 22 mm and a total length of 21 mm, and it can operate with a maximum torque of 20 mNm.
A long-lasting brushless rectifier with a high volume-to-output ratio flat motor. It is equipped with a Hall sensor for servo control.
The FAULHABER brushless flat DC servo motor with integrated speed controller 4221…BXT H SC has a diameter of 42 mm and a total length of 28 mm, capable of driving with a maximum torque of 92 mNm.
Compact and high-efficiency AC-DC multi-converter! It can be used as a substitute for "MMC8A"!
The "NTUC8 Series" is a compact, high-efficiency AC-DC multi-converter of the board type. It is a substitute for the discontinued "MMC8A," so it can be used as a replacement product. We offer the "NTUC8-1" with a DC output of +12V, 0.1A, and the "NTUC8-2" with +15V, 0.1A in our lineup. [Features] ■ Mounting position board size ■ Same as the MMC8A series ■ Interface fully compatible *For more details, please refer to the PDF document or feel free to contact us.
It demonstrates its power as a preamplifier (amp) for high-speed A/D converters!
It has sufficient bandwidth and gain as a preamplifier (amp) for high-speed A/D converters. It features a 50Ω differential output, allowing for matched connection with a 50Ω load, enabling accurate waveform transmission. Its compact and lightweight design makes it easy to use without being limited to specific installation locations.
The best teaching material for learning motor control! DC servo motor.
Brushless DC Servo Motor with Built-in Power Amplifier ■□■ Features ■□■ ■ Equipped with a 150 pulses/rev rotary encoder for feedback, allowing servo control via 5V TTL signals. ■ Ideal educational material for learning motor control. ■ Suitable for learning PWM control, phase counting, PID, etc. ■ Can be controlled using microcontrollers such as PIC and H8. * This product does not come with a program. * If you would like a sample program, please purchase the DC servo development set. ■ Built-in servo amplifier, high-efficiency compact brushless DC servo motor. ■ Power control via PWM allows for forward and reverse rotation. ■ Equipped with a 150 pulses/rev rotary encoder. ■ Motor control is possible with general 5V TTL (general CPU) connection. ■ Maximum speed is 5000 rpm. ■ Available in various sizes and voltages to suit your needs. ■ 300 pulses/rev type is also available as an option (special order). ■ For other functions and details, please download the catalog or contact us.
Built-in servo amplifier for reduced wiring, space-saving, waterproof and dustproof, with holding brake, and also available in battery-free absolute sensor type.
A servo motor with a built-in controller and amplifier that achieves reduced wiring and space, combined with the planetary gear unit from the world's top brand, Wittenstein Alpha (a group company). It is a servo actuator with a high power density planetary gear integrated with the controller and amplifier. Wittenstein Ternary, well-versed in both motors and gears, offers a servo actuator with optimal balance.
All-in-one waterproof servo system with built-in servo amplifier.
Brushless AC servo motor-based servo actuators. The features of the brushless AC servo motor, such as quiet operation, instantaneous high torque, and high-speed drive, are realized in a servo amplifier integrated with simple wiring. Rated output of 100W and 300W. There is a lineup of immediately deployable options, including types with built-in holding brakes, waterproof specifications, various field network specifications, pulse input, and analog input types. In addition to standalone servo motors, servo actuators that integrate mechanical mechanisms such as rod cylinders, sliders, and those with planetary gears are available in optimal combinations. As a sister product, a closed-loop control stepping motor type (DC24V drive) is also included in the lineup, maintaining a consistent usability across the series.
Large-diameter hollow shaft brushless servo motor. Two types with hollow diameters of Φ23mm and Φ43mm. Motor rated output from 200W to 1.6KW.
This is a large-diameter hollow servo motor designed and manufactured domestically. <Standard Specifications> ● Hollow diameter: Φ23mm, Φ43mm ● Motor width: ● Motor length: Three types of motor lengths for each outer diameter ● Two types of voltage (maximum 60V or 600V) ● Incremental encoder, resolution 19 bits ● Encoder signal type: BISS-C ● Built-in temperature sensor
Smooth operation with large inertia loads and belt drive without tuning!
The "NX Series" is a servo motor that enables high-precision control with simple operation. It can drive large inertia loads and belt mechanisms stably without the need for gain adjustment, similar to a stepping motor. Additionally, if gain adjustment is performed manually, operation under more demanding load conditions becomes possible. 【Features】 ■ Easy operation ■ Achieves large inertia drive ■ Enables smooth operation with belt mechanisms ■ Simple operation ■ Easy setup and monitoring *For more details, please download the PDF or feel free to contact us.
![[Information] Servo System Partner](https://image.mono.ipros.com/public/product/image/e2c/2001521455/IPROS7620944769955647294.png?w=280&h=280)
Achieving device innovation! Flexibly responding to system construction with a variety of partner products.
In this catalog, we introduce various partner-driven products. We feature "Partner Motion Products" that achieve advanced motion control with PC environment controllers, as well as "Encoders" that significantly expand the options for mechanical design. Each product is clearly explained, including its features, specifications, application examples, and system configurations, making it easy to reference when considering implementation. 【Featured Products (Partial)】 ■ Partner Motion Products ■ Partner Driven Products (Network Connected) ■ Partner Driven Products (Driven by Our Servo Amplifiers) ■ Encoders ■ Peripheral Products *For more details, please download the PDF or feel free to contact us.
![[Information] Guide for Replacing MR-J4 Series with J5 Series](https://image.mono.ipros.com/public/product/image/322/2001521457/IPROS9529985914812010447.png?w=280&h=280)
Introducing the replacement policy and process! Also explaining rotary servo motors and surrounding options.
This document outlines the considerations for replacing the system used in the MR-J4 series with the MR-J5 series. It includes the basic flow for the replacement as well as the changes involved when switching to the new system. Additionally, it covers the replacement of rotary servo motors and peripheral options, so please feel free to download and take a look. [Contents] ■ Part 1 Overview of Replacement ■ Part 2 Replacement from MR-J4-B to MR-J5-G ■ Part 3 Replacement from MR-J4-B to MR-J5-B ■ Part 4 Considerations for Replacing Rotary Servo Motors ■ Part 5 Considerations for Replacing Peripheral Options *For more details, please download the PDF or feel free to contact us.
A compact high-thrust motor that achieves space-saving for the device! Easy inventory and spare parts management.
We would like to introduce our linear servo motor, the 'LM-H4M series'. Compared to the previous model LM-H3P3, we have achieved both miniaturization of the motor and an increase in thrust. This compact, high-thrust motor enables space-saving in equipment and reduces cycle time with a maximum speed of 5.0 m/s. 【Features】 ■ Compact, high-thrust motor that achieves space-saving in equipment ■ Reduces cycle time with a maximum speed of 5.0 m/s ■ Increased thrust/velocity possible through expanded combinations of servo amplifiers ■ Easy inventory and spare parts management due to the connection mechanism of the same module *For more details, please download the PDF or feel free to contact us.
Providing cutting-edge productivity and efficiency! With excellent control precision and responsiveness, we meet our customers' expectations.
This catalog introduces the 'HDS High-Performance AC Permanent Magnet Servo Motor,' which boasts space-saving design, high precision, and high efficiency. It includes product information, model descriptions, thermal protection, terminal arrangements for power supply and feedback, as well as options and accessories. With advanced design and sophisticated manufacturing technology, it offers excellent control precision and responsiveness, meeting customer expectations. [Contents (excerpt)] ■ HDS Series Servo Motors ■ Product Information ■ Model Descriptions ■ Technical Specifications ■ Performance Curves *For more details, please refer to the PDF document or feel free to contact us.
